BCA WE60345
- Recorded application condition
- Bearing
- Source year range
- 1998–2008; selected model year 2006
Additional selection restrictions
- Standard
BCA 2021 catalogue, page 548.
Inspect this original reference row →Identify the vehicle. Retain the restrictions.
2006 Subaru Forester Rear wheel — all positions bearing reference
Look up 4 BCA catalogue entries for 2006 Subaru Forester — Rear wheel — all positions. Compare full part references, component roles and recorded restrictions; confirm current vehicle-specific requirements before use.
Filter by vehicle and component
What this lookup establishes—and what it does not
Source: BCA 2021 Wheel Hub Assembly, Bearing and Seal Catalog. The loaded entries cover listed model years from 1995 through 2020. This is a historical catalogue reference, not a live VIN decoder or a guarantee for every trim, market or production date.
BCA is an NTN-owned product line. The numbers below remain BCA part references; they are not silently converted into NTN, SKF or another brand's part numbers. Confirm current OEM/service requirements before use.
Which bearing or hub reference applies?
The catalogue contains 4 reference entries for 2006 Subaru Forester in Rear wheel — all positions. Select the year and component, then read the full condition and footnote fields. There is no single universal bearing number for every support in this vehicle.
Wheel-bearing and hub references for 2006 Subaru Forester
1 source-listed bearing or hub entry below match the selected model year and wheel position in the historical BCA catalogue. Read the condition beside the number; the list does not select a part for an unspecified trim or VIN.
Vehicle used for this answer: 2006 Subaru Forester. Confirm the full manufacturer and model name shown here when arriving from a shortened model-name or two-digit-year search. These are BCA references from the 2021 catalogue, not current OEM fitment approvals.
Wheel-Rear
Other listed components — not a complete bearing or hub (3)
- BCA NS225005: Seal — not a bearing; Wheel-Rear Center. Read its conditions in the full table.
- BCA NS710226: Seal — not a bearing; Wheel-Rear Inner. Read its conditions in the full table.
- BCA NS710529: Seal — not a bearing; Wheel-Rear Outer. Read its conditions in the full table.
Use the reference for the right task
A wheel-bearing lookup identifies historical catalogue candidates. A separate bearing race is not the entire bearing, and a seal or hub-repair kit is not automatically a complete hub assembly. Preserve front/rear, inner/outer and side-specific positions exactly as listed.
For current fitment, verify the complete vehicle configuration and current manufacturer/service information. This table does not supply axle-nut torque, a repair procedure, dimensions or an official cross-brand interchange. Those unanswered requirements remain separate.
Reference records
1–4 of 4“Bearing”, “hub assembly”, “seal” and “repair sleeve” describe different components. The source description, rather than the catalogue title, determines the role of each number.
On a phone, each record is shown as a complete card with its restrictions. These records do not supply tightening torques or certify a replacement.
| BCA part reference | Component / position | Source model years | Recorded conditions & restrictions | Source trace |
|---|---|---|---|---|
| WE60345BCA catalogue reference | Wheel-Rear | 1998–2008Subject to the conditions in this row | Bearing
| 2021 catalogue Page 548Entry 6404873e |
| NS225005BCA catalogue reference | Wheel-Rear Center | 1998–2008Subject to the conditions in this row | SealNo additional numbered footnote is attached to this source row. | 2021 catalogue Page 549Entry 5602c67d |
| NS710226BCA catalogue reference | Wheel-Rear Inner | 1998–2008Subject to the conditions in this row | SealNo additional numbered footnote is attached to this source row. | 2021 catalogue Page 549Entry 7200ce05 |
| NS710529BCA catalogue reference | Wheel-Rear Outer | 1998–2008Subject to the conditions in this row | SealNo additional numbered footnote is attached to this source row. | 2021 catalogue Page 549Entry 01918b65 |
Checks before treating a reference as a replacement
Identify the complete vehicle
Match model year, engine, transmission, driven axle, body and production/VIN limits. A year and model name alone may leave several valid-looking entries.
Match the component role
Distinguish a loose bearing, complete hub, cup/cone, seal and repair sleeve. Check front/rear and inner/outer or left/right position exactly as recorded.
Preserve vehicle-specific interfaces
Confirm encoder/ABS arrangement, flange and spline interfaces, retention and the current service procedure. Do not transfer torque or installation force from an unrelated part.
How to use these results
Does a listed number guarantee fitment for my VIN?
No. These are source-listed catalogue references. Read every restriction and verify the current OEM and manufacturer information for the exact vehicle configuration. Missing VIN or production details remain unknown.
Can I replace a hub using a bearing with the same dimensions?
Not on dimensions alone. The complete assembly, encoder, retention, loading and installation interfaces must agree. The main bearing catalogue and cross-brand comparisons are separate dimensional references, not vehicle approvals.
Where are the axle-nut torque and installation instructions?
This application catalogue does not establish a universal torque or a complete installation sequence. Use the current vehicle-specific service procedure, including fastener reuse rules and staged tightening. Do not infer torque from the bearing number.
Does wheel noise prove that one of these parts has failed?
No. Bearing damage, tyres, brakes and driveline faults can produce overlapping symptoms. A reference lookup identifies candidates; it does not diagnose the cause or prove which side has failed.
Look up an exact source part number
Keep the BCA prefix and full marking. Similar numbers from other manufacturers are not automatically cross-references.
Continue the technical investigation
Source and interpretation limits
Factual reference basis: BCA 2021 Wheel Hub Assembly, Bearing and Seal Catalog, published by BCA Bearings, an NTN product line, with its linked numbered footnote reference. Each row retains its source page and restrictions. Vehicle names shared by one source entry remain associated with that entry; source counts are not quantities for sale.
BearingScope provides independently organized technical lookup and interpretation. It does not sell these parts, provide a repair service, certify current fitment, or claim that an absent result is unavailable from a manufacturer. Original public catalogue files and source fingerprints are retained in the site's verification records.