BCA WE60802 — vehicle application reference
Inspect 10 source-listed vehicle applications for BCA WE60802, with the original year ranges, component positions and restrictions. Historical catalogue evidence is not current VIN fitment approval.
Filter by vehicle and component
What this lookup establishes—and what it does not
Source: BCA 2021 Wheel Hub Assembly, Bearing and Seal Catalog. The loaded entries cover listed model years from 1995 through 2020. This is a historical catalogue reference, not a live VIN decoder or a guarantee for every trim, market or production date.
BCA is an NTN-owned product line. The numbers below remain BCA part references; they are not silently converted into NTN, SKF or another brand's part numbers. Confirm current OEM/service requirements before use.
WE60802 specifications
Wheel Bearing and Hub Assembly
Source-listed part measurements and interfaces. These specifications do not extend the historical vehicle applications below or certify a replacement.
- Flange outside diameter
- 131.8 mm
- Bolt-circle diameter
- 110 mm
- Wheel studs
- 4
- ABS arrangement
- Tone Ring
Source: BCA public part record · Checked 2026-10-04
BCA Bearings / NTN · Exact reference WE60802. Original source values are retained. Packaging dimensions and marketing claims are excluded. The checked date records collection, not a manufacturer revision or fitment approval.
20 published parameters. Values not supplied by the source are not inferred.
Bearing construction
Read the exact part identity and construction before comparing dimensions.
| Parameter | Published value | Interpretation limit |
|---|---|---|
| Bearing type | Ball | The source describes the rolling-element type; this does not establish a load rating. |
| Bearing generation | Gen 3 | A generation label describes the assembly architecture, not compatibility with another part. |
| Drive type — source field | Driven | Do not translate this part-level field into a vehicle AWD, 4WD or RWD fitment rule. |
Dimensions and mass
These are part or assembly fields, not shipping-box dimensions. Both units are the values published by the source, not calculated replacements.
| Parameter | Published value | Interpretation limit |
|---|---|---|
| Flange outside diameter | 131.8 mm5.19 in | This is not the bolt-circle diameter or the bearing race outside diameter. |
| Flange offset | 39 mm1.535 in | The value is retained from the source. Without its datum drawing, do not infer an overall assembly length. |
Mounting interfaces
Matching one interface does not establish interchangeability. Flange, pilot, fastener and spline details must be checked together.
| Parameter | Published value | Interpretation limit |
|---|---|---|
| Flange included | Yes | Read together with the complete part identity and the vehicle-specific requirements. |
| Flange shape | Modified Triangle | Read together with the complete part identity and the vehicle-specific requirements. |
| Number of flanges | 2 | Read together with the complete part identity and the vehicle-specific requirements. |
| Flange bolt holes | 3 | A hole count alone does not give its pitch circle, thread or tightening torque. |
| Wheel studs | 4 | Check the stud thread and wheel interface as well as the count. |
| Spline count | 33 | Spline count is not a complete spline specification or a guarantee of shaft compatibility. |
| Knuckle bolt thread | M12 - 1.75 | A thread designation does not specify tightening torque, bolt grade or reuse permission. |
| Wheel stud thread | M12 - 1.5 | Retain the full thread designation; do not infer torque from thread size. |
| Bolt-circle diameter | 110 mm4.331 in | The circle through bolt or stud centres is not the flange outside diameter. |
| Knuckle bolt-circle diameter | 110 mm4.33 in | Keep this mounting interface separate from the wheel-side bolt circle. |
| Knuckle pilot-hole diameter | 85 mm3.35 in | Retain the source field name; do not treat it as the bearing bore. |
| Wheel pilot diameter | 56.5 mm2.223 in | The wheel locating pilot is a separate interface from the brake pilot. |
| Brake pilot diameter | 59.9 mm2.359 in | The brake locating pilot is not necessarily the wheel locating diameter. |
ABS and supplied hardware
An ABS description is not a wiring diagram or an encoder orientation instruction. Verify the vehicle-specific service procedure.
| Parameter | Published value | Interpretation limit |
|---|---|---|
| ABS provision | Yes | Read together with the complete part identity and the vehicle-specific requirements. |
| ABS arrangement | Tone Ring | Preserve the stated encoder, tone-ring and sensor distinction; verify the actual connector and installation orientation. |
No published parameter matches. Try a shorter term or choose all groups.
How to compare this technical sheet safely
- Match the full BCA reference. A similar base number or a kit suffix does not establish identical contents.
- Distinguish flange outside diameter, bolt circle, wheel pilot, brake pilot and bearing race diameter. They are different measurements.
- Compare all required interfaces and the complete vehicle configuration. A dimension match alone is not interchange evidence.
- Missing load ratings, torque, connector details, tolerance drawings or VIN limits remain unknown. Use the current exact-vehicle service information before installation.
Unit controls select source-published values. If the selected unit was not published, the available original unit remains visible and is labelled; no silent conversion takes place.
Where this exact BCA reference is listed
BCA WE60802 appears in 10 source application entries below. Different entries can have different vehicles, positions and restrictions. A shared part reference does not make every bearing in the vehicle interchangeable.
Reference records
1–10 of 10“Bearing”, “hub assembly”, “seal” and “repair sleeve” describe different components. The source description, rather than the catalogue title, determines the role of each number.
On a phone, each record is shown as a complete card with its restrictions. These records do not supply tightening torques or certify a replacement.
| BCA part reference | Component / position | Source model years | Recorded conditions & restrictions | Source trace |
|---|---|---|---|---|
| WE60802BCA catalogue reference | Wheel-Front | 2005–2006Subject to the conditions in this row | Bearing and Hub Assembly - 2.2L 2198cc 134cid L4, 4-Wheel ABSNo additional numbered footnote is attached to this source row. | 2021 catalogue Page 123Entry 1322e7e8 |
| WE60802BCA catalogue reference | Wheel-Front | 2007–2010Subject to the conditions in this row | Bearing and Hub Assembly - 2.2L 2198cc 134cid L4, 4-Wheel ABS
| 2021 catalogue Page 124Entry be711f93 |
| WE60802BCA catalogue reference | Wheel-Front | 2007–2010Subject to the conditions in this row | Bearing and Hub Assembly - 4-Wheel ABS
| 2021 catalogue Page 514Entry 506efbe7 |
| WE60802BCA catalogue reference | Wheel-Front | 2005–2006Subject to the conditions in this row | Bearing and Hub Assembly - 4-Wheel ABS
| 2021 catalogue Page 513Entry f3766cb0 |
| WE60802BCA catalogue reference | Wheel-Front | 2003Subject to the conditions in this row | Bearing and Hub Assembly - 4-Wheel ABSNo additional numbered footnote is attached to this source row. | 2021 catalogue Page 534Entry 75a33a72 |
| WE60802BCA catalogue reference | Wheel-Front | 2004–2007Subject to the conditions in this row | Bearing and Hub Assembly - 2, 4-Wheel ABSNo additional numbered footnote is attached to this source row. | 2021 catalogue Page 534Entry 0ed36e4e |
| WE60802BCA catalogue reference | Wheel-Front | 2004–2005Subject to the conditions in this row | Bearing and Hub Assembly - 1, 4-Wheel ABSNo additional numbered footnote is attached to this source row. | 2021 catalogue Page 534Entry 67bd7c19 |
| WE60802BCA catalogue reference | Wheel-Front | 2004–2005Subject to the conditions in this row | Bearing and Hub Assembly - 3, 4-Wheel ABSNo additional numbered footnote is attached to this source row. | 2021 catalogue Page 534Entry adb41102 |
| WE60802BCA catalogue reference | Wheel-Front | 2006–2007Subject to the conditions in this row | Bearing and Hub Assembly - 3, 2.2L 2198cc 134cid L4, 4-Wheel ABSNo additional numbered footnote is attached to this source row. | 2021 catalogue Page 534Entry 2bb1914f |
| WE60802BCA catalogue reference | Wheel-Front | 2006–2007Subject to the conditions in this row | Bearing and Hub Assembly - 3, 2.4L 2384cc 145cid L4No additional numbered footnote is attached to this source row. | 2021 catalogue Page 534Entry d6724e25 |
Checks before treating a reference as a replacement
Identify the complete vehicle
Match model year, engine, transmission, driven axle, body and production/VIN limits. A year and model name alone may leave several valid-looking entries.
Match the component role
Distinguish a loose bearing, complete hub, cup/cone, seal and repair sleeve. Check front/rear and inner/outer or left/right position exactly as recorded.
Preserve vehicle-specific interfaces
Confirm encoder/ABS arrangement, flange and spline interfaces, retention and the current service procedure. Do not transfer torque or installation force from an unrelated part.
How to use these results
Does a listed number guarantee fitment for my VIN?
No. These are source-listed catalogue references. Read every restriction and verify the current OEM and manufacturer information for the exact vehicle configuration. Missing VIN or production details remain unknown.
Can I replace a hub using a bearing with the same dimensions?
Not on dimensions alone. The complete assembly, encoder, retention, loading and installation interfaces must agree. The main bearing catalogue and cross-brand comparisons are separate dimensional references, not vehicle approvals.
Where are the axle-nut torque and installation instructions?
This application catalogue does not establish a universal torque or a complete installation sequence. Use the current vehicle-specific service procedure, including fastener reuse rules and staged tightening. Do not infer torque from the bearing number.
Does wheel noise prove that one of these parts has failed?
No. Bearing damage, tyres, brakes and driveline faults can produce overlapping symptoms. A reference lookup identifies candidates; it does not diagnose the cause or prove which side has failed.
Look up an exact source part number
Keep the BCA prefix and full marking. Similar numbers from other manufacturers are not automatically cross-references.
Continue the technical investigation
Source and interpretation limits
Factual reference basis: BCA 2021 Wheel Hub Assembly, Bearing and Seal Catalog, published by BCA Bearings, an NTN product line, with its linked numbered footnote reference. Each row retains its source page and restrictions. Vehicle names shared by one source entry remain associated with that entry; source counts are not quantities for sale.
BearingScope provides independently organized technical lookup and interpretation. It does not sell these parts, provide a repair service, certify current fitment, or claim that an absent result is unavailable from a manufacturer. Original public catalogue files and source fingerprints are retained in the site's verification records.