Look up 4 BCA catalogue entries for 1997 Jeep Wrangler — Clutch. Compare full part references, component roles and recorded restrictions; confirm current vehicle-specific requirements before use.
Source: BCA 2021 Wheel Hub Assembly, Bearing and Seal Catalog. The loaded entries cover listed model years from 1995 through 2020. This is a historical catalogue reference, not a live VIN decoder or a guarantee for every trim, market or production date.
BCA is an NTN-owned product line. The numbers below remain BCA part references; they are not silently converted into NTN, SKF or another brand's part numbers. Confirm current OEM/service requirements before use.
The catalogue contains 4 reference entries for 1997 Jeep Wrangler in Clutch. Select the year and component, then read the full condition and footnote fields. There is no single universal bearing number for every support in this vehicle.
Selected vehicle: 1997 Jeep Wrangler. The references below come from the BCA 2021 catalogue. They answer a historical part-number lookup, not a VIN-level fitment approval. Match the actual assembly, transmission and source restrictions before treating any number as a candidate.
For a throwout-bearing search, start with the entries labelled Release Bearing. The catalogue lists pilot bearings and pilot bushings separately: they are not alternative names for the release bearing. Several references may share a model year but have different engine or assembly conditions.
Part of the clutch disengagement system. Preserve bearing-only versus hub/bearing assembly restrictions; a listed bearing is not automatically a complete hydraulic slave-cylinder unit.
Supports or guides the transmission input shaft in the applicable design. Read the source role before comparing numbers. A pilot bushing remains a bushing in this reference, not a rolling-bearing specification.
Required source restrictions
BCA 2021 catalogue, page 373.
Inspect the original reference row →No numbered restriction is attached to this entry. This is not confirmation for every trim, market or production date.
BCA 2021 catalogue, page 373.
Inspect the original reference row →Required source restrictions
BCA 2021 catalogue, page 373.
Inspect the original reference row →Required source restrictions
BCA 2021 catalogue, page 373.
Inspect the original reference row →This page does not provide removal steps, installation torque, safe-driving advice, diagnosis or a current supersession. Missing technical data remains unverified. A noise description by itself does not establish which bearing needs replacement.
Reference basis: BCA 2021 application catalogue and its numbered footnotes. General clutch-role explanation: ZF Aftermarket / SACHS. BearingScope independently organizes these references for technical lookup; it does not sell parts or certify vehicle fitment.
“Bearing”, “hub assembly”, “seal” and “repair sleeve” describe different components. The source description, rather than the catalogue title, determines the role of each number.
On a phone, each record is shown as a complete card with its restrictions. These records do not supply tightening torques or certify a replacement.
| BCA part reference | Component / position | Source model years | Recorded conditions & restrictions | Source trace |
|---|---|---|---|---|
| NB614093BCA catalogue reference | Clutch | 1997–2015Subject to the conditions in this row | Release Bearing
| 2021 catalogue Page 373Entry 514e6c75 |
| NBFC65446BCA catalogue reference | Clutch | 1997–2002Subject to the conditions in this row | Pilot Bearing - 2.5L 150cid L4No additional numbered footnote is attached to this source row. | 2021 catalogue Page 373Entry b9bd2898 |
| NBFC69907BCA catalogue reference | Clutch | 1997–2006Subject to the conditions in this row | Pilot Bearing - 4.0L 242cid L6
| 2021 catalogue Page 373Entry b82f0135 |
| NBSCE1295BCA catalogue reference | Clutch | 1997–2005Subject to the conditions in this row | Pilot Bearing - 4.0L 242cid L6
| 2021 catalogue Page 373Entry 8630c4a6 |
Match model year, engine, transmission, driven axle, body and production/VIN limits. A year and model name alone may leave several valid-looking entries.
Distinguish a loose bearing, complete hub, cup/cone, seal and repair sleeve. Check front/rear and inner/outer or left/right position exactly as recorded.
Confirm encoder/ABS arrangement, flange and spline interfaces, retention and the current service procedure. Do not transfer torque or installation force from an unrelated part.
No. These are source-listed catalogue references. Read every restriction and verify the current OEM and manufacturer information for the exact vehicle configuration. Missing VIN or production details remain unknown.
Not on dimensions alone. The complete assembly, encoder, retention, loading and installation interfaces must agree. The main bearing catalogue and cross-brand comparisons are separate dimensional references, not vehicle approvals.
This application catalogue does not establish a universal torque or a complete installation sequence. Use the current vehicle-specific service procedure, including fastener reuse rules and staged tightening. Do not infer torque from the bearing number.
No. Bearing damage, tyres, brakes and driveline faults can produce overlapping symptoms. A reference lookup identifies candidates; it does not diagnose the cause or prove which side has failed.
Keep the BCA prefix and full marking. Similar numbers from other manufacturers are not automatically cross-references.
Factual reference basis: BCA 2021 Wheel Hub Assembly, Bearing and Seal Catalog, published by BCA Bearings, an NTN product line, with its linked numbered footnote reference. Each row retains its source page and restrictions. Vehicle names shared by one source entry remain associated with that entry; source counts are not quantities for sale.
BearingScope provides independently organized technical lookup and interpretation. It does not sell these parts, provide a repair service, certify current fitment, or claim that an absent result is unavailable from a manufacturer. Original public catalogue files and source fingerprints are retained in the site's verification records.