Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications11 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Variant / construction | Super-precision angular contact ball bearings | |
| Bore diameter | d | 40 mm |
| Outside diameter | D | 62 mm |
| Width | B | 12 mm |
| Basic dynamic load rating | C | 9.75 kN |
| Basic static load rating | C0 | 6 kN |
| Fatigue load limit | Pu | 0.186 kN |
| Mass | ≈m | 0.098 kg |
| Sealing | Without | |
| Bearing material | Hybrid (ceramic balls) | |
| Lubricant | None |
Dimensions4 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | 40.0 mm | |
| Outside diameter | 62.0 mm | |
| Width | 12.0 mm | |
| Contact angle | 18.0 ° |
Product identity5 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Official product category | Super-precision angular contact ball bearings | |
| Official taxonomy path | /products/super-precision-bearings/angular-contact-ball-bearings | |
| Structure group ID | BA1_010 | |
| Available from SKF | Yes | |
| Remanufacturable | No |
Engineering — Abutment dimensions7 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Diameter of shaft abutment | d a | min. 43.2 mm |
| Diameter of shaft abutment | d b | min. 42 mm |
| Diameter of housing abutment | D a | max. 58.8 mm |
| Diameter of housing abutment | D b | max. 60 mm |
| Radius of fillet | r a | max. 0.6 mm |
| Radius of fillet | r b | max. 0.3 mm |
| Position of oil nozzle | d n | 48 mm |
Engineering — Calculation data11 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Basic dynamic load rating | C | 9.75 kN |
| Basic static load rating | C 0 | 6 kN |
| Fatigue load limit | P u | 0.186 kN |
| Attainable speeds | Refer to catalogue data or contact SKF for the attainable speeds | |
| Attainable speed for grease lubrication | To be calculated: Single bearing () x speed reduction factor (see table below) | |
| Attainable speed for oil-air lubrication | To be calculated: Single bearing () x speed reduction factor (see table below) | |
| Contact angle | α | 18 ° |
| Ball diameter | D w | 6.35 mm |
| Number of rows | i | 1 |
| Number of balls (per bearing) | z | 19 |
| Reference grease quantity (per bearing) | G ref | 1.4 cm³ |
Engineering — Calculation data — Correction factors for preload calculation4 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Correction factor dependent on bearing series and size | f | 1.1 |
| Correction factor dependent on contact angle | f 1 | 1 |
| Correction factor, preload class A | f 2A | 1 |
| Correction factor for hybrid bearings | f HC | 1 |
Engineering — Calculation data — Factors for equivalent bearing load calculation2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Calculation factor for equivalent loads | f 0 | 8.2 |
| Additional factors for equivalent loads | Refer to Notes 1 and 2 below |
Engineering — Calculation data — Preload and stiffness (back-to-back, face-to-face)3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Preload class | A | |
| Preload when unmounted | G | 63 N |
| Axial stiffness | 49 N/µm |
Engineering — Dimensions9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 40 mm |
| Outside diameter | D | 62 mm |
| Width | B | 12 mm |
| Shoulder diameter of inner ring (large side face) | d 1 | 46.5 mm |
| Shoulder diameter of inner ring (small side face) | d 2 | 44.8 mm |
| Shoulder diameter of outer ring (large side face) | D 1 | 54.15 mm |
| Chamfer dimension | r 1,2 | min. 0.6 mm |
| Chamfer dimension | r 3,4 | min. 0.3 mm |
| Distance from side face to pressure point | a | 14.2 mm |
Engineering — Engineering specifications1 parameter
| Parameter | Symbol | Value |
|---|---|---|
| Universal matching bearing(s) | Yes, back-to-back (<>), face-to-face (> >) |
Logistics3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Product net weight | 0.098 kg | |
| eClass code | 23-05-08-03 | |
| UNSPSC code | 31171531 |
Performance3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Basic dynamic load rating | 9.75 kN | |
| Basic static load rating | 6.0 kN | |
| Note | Refer to catalogue data or contact SKF for the attainable speeds |
Properties13 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Contact type | Normal contact (two-point contact) | |
| Number of rows | 1 | |
| Ring type | One-piece inner and outer rings | |
| Design | High-speed E | |
| Universal matching bearing | Yes, back-to-back (<>), face-to-face (> >) | |
| Matched arrangement | No | |
| Matched condition (axial clearance/ preload) | Measuring load, class A | |
| Tolerance class | P4A | |
| Material, bearing | Hybrid (ceramic balls) | |
| Coating | Without | |
| Sealing | Without | |
| Lubricant | None | |
| Indicative carbon footprint for new product | 0.36 kg CO 2 e |
