Read this exact catalogue record
NTN UCT213 is recorded in the manufacturer catalogue as bearing units.
Reference:NTN Europe public product catalogue; source checked 2026-10-01.
How to use the parameters
- Check the component or assembly description and the dimension symbols in the table. A unit, separate ring or one-way mechanism must not be treated as a standard interchangeable d×D×B bearing.
- Use the complete NTN marking when comparing this record. The base number alone does not establish the same closure, clearance, cage, load rating or speed across brands.
- Dynamic and static load ratings are catalogue reference values, not a permitted working load for every installation. Grease and oil speed entries describe separate lubrication conditions; do not treat the higher value as a general operating limit.
- Mounting dimensions such as shoulder diameters and maximum fillet radii are not the bearing boundary dimensions. Unknown precision, material, lubricant grade and application fitment are not inferred from similar products.
This is an independent technical reference, not an official drawing, a complete current catalogue or an approval for a vehicle or machine.
Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Variant / construction | Bearing units | |
| Sealing | seal with slinger |
Product characteristics2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Catalogue construction | Grey cast housing, radial insert ball bearing with socket set screws,seal with slinger | |
| Closure construction | seal with slinger |
Dimensions and properties17 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Housing width (HB2, C) (A) | 70 mm | |
| Guidance groove width (T) (A1) | 26 mm | |
| Housing width (T) (A2) | 44 mm | |
| Insert IR width (B) | 65.1 mm | |
| Bore diameter (shaft diameter) | 65 mm | |
| Overall height (T) (H) | 167 mm | |
| Distance between bottom of guidance grooves (T) (H1) | 151 mm | |
| Height of attachment end (T) (H2) | 111 mm | |
| Housing length (T) (L) | 224 mm | |
| Distance to bearing center line (T) (L1) | 137 mm | |
| Thickness of attachment end (T) (L2) | 23 mm | |
| Length of guidance groove (T) (L3) | 121 mm | |
| Dia. of attachment bolt hole (T, T2) (N) | 41 mm | |
| Length of attachment slot | N1 | 32 mm |
| Height of attachment slot | N2 | 70 mm |
| Radius (T) (r) | 87 mm | |
| middle of bearing raceway (S) | Distance IR face | 25.4 mm |