Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications7 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | ZKLF100230 | |
| Bore diameter | d | 100 mm |
| Outside diameter | D | 230 mm |
| Width | B | 85 mm |
| Mass | ≈m | 17.605 kg |
| Minimum operating temperature | Tmin | -30 °C |
| Maximum operating temperature | Tmax | 120 °C |
Manufacturer Identity3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 395493 | |
| Brand | INA | |
| Base Type | ZKLF100230 |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Axial angular contact ball bearings ZKLF..-2Z, double direction, for screw mounting, gap seals on both sides | |
| Short Description | Axial angular contact ball bearing |
Technical Data38 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter (D) | 100 mm | |
| Outside Diamater (D) | 230 mm | |
| Total Width (B) | 85 mm | |
| Basic Dynamic Load Rating, Axial (Ca) | 295,000 N | |
| Basic Static Load Rating, Axial (C0A) | 790,000 N | |
| Operating Temperature Min. (Tmin) | -30 °C | |
| Limiting Speed For Grease Lubrication (Ng Grea) | 2,900 1/min | |
| Operating Temperature Max. (Tmax) | 120 °C | |
| Pitch Circle Diameter Fixing Holes (J) | 200 mm | |
| Tilting Rigidity (Ckl) | 8,200 Nm/mrad | |
| Fatigue Load Limit, Axial (Cua) | 30,000 N | |
| Number Of Holes In Adjacent Construction (Na) | 12 | |
| Bore Diameter Lower Tolerance (Bore Diamete) | -0.008 mm | |
| Contact Angle (Α) | 60 ° | |
| Minimum Diameter Shaft (Da Min) | 130 mm | |
| Width Lower Tolerance (Width Lower) | -0.25 mm | |
| Minimum Chamfer Dimension (R1 Min) | 0.6 mm | |
| Pitch Separation Angle Of Fixing Holes (T) | 30 ° | |
| Width Upper Tolerance (Width Upper) | 0 mm | |
| Maximum Diameter Of Housing (Da Max) | 175 mm | |
| Bore Diameter Upper Tolerance (Bore Diamete) | 0 mm | |
| Rib Diameter Inner Ring (D1) | 146 mm | |
| Distance Of Extraction Slot (I) | 73 mm | |
| Pitch Quantity Of Fixing Holes (N) | 12 | |
| Required Locknut Force Axial (Required Loc) | 52,000 N | |
| Rigidity Axial (Cal) | 2,450 N/µm | |
| Outside Diameter Lower Tolerance (Outside Diam) | -0.015 mm | |
| Tightening Torque For The Recommended Ina Precision Locknut (Ma) | 500 Nm | |
| Bearing Frictional Torque (Mr) | 3 Nm | |
| Minimum Chamfer Dimension (Rmin) | 0.6 mm | |
| Pitch Separation Angle Of Holes In Adjacent Construction (Ta) | 30 ° | |
| Width Of Extraction Slot (B) | 3 mm | |
| Axial Runout (Axial Runout) | 3 µm | |
| Fixing Holes Diameter (D2) | 14 mm | |
| Thermally Safe Operating Speed (Nϑ) | 2,000 1/min | |
| Position Tolerance Of Bore In The Housing (T1) | 0.4 mm | |
| Mass Moment Of Inertia (Mm) | 185 kg*cm2 | |
| Outside Diameter Upper Tolerance (Outside Diam) | 0 mm |
