Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications7 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 460 mm |
| Outside diameter | D | 600 mm |
| Width | B | 70 mm |
| Limiting speed | nG | 1400 r/min |
| Mass | ≈m | 46.2 kg |
| Minimum operating temperature | Tmin | -30 °C |
| Maximum operating temperature | Tmax | 120 °C |
Manufacturer Identity4 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 395636 | |
| Brand | INA | |
| Base Type | ZKLDF460 | |
| X Life Marking | n.r. |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Axial angular contact ball bearings ZKLDF, double direction, for screw mounting, sealing shields on both sides | |
| Short Description | Axial angular contact ball bearing |
Technical Data34 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter (D) | 460 mm | |
| Flange Diameter (D) | 600 mm | |
| Total Height (H) | 70 mm | |
| Basic Dynamic Load Rating, Axial (Ca) | 255,000 N | |
| Basic Static Load Rating, Axial (C0A) | 1,860,000 N | |
| Tilting Rigidity Of Bearing Position (Ckl) | 175,000 Nm/mrad | |
| Operating Temperature Min. (Tmin) | -30 °C | |
| Operating Temperature Max. (Tmax) | 120 °C | |
| Limiting Speed (Limiting Spe) | 1,400 1/min | |
| Fatigue Load Limit, Axial (Cua) | 37,000 N | |
| Pitch Quantity (N) | 48 | |
| Bore Diameter Lower Tolerance (Bore Diamete) | -0.023 mm | |
| Counterbore Diameter Of Fixing Holes (D2) | 15 mm | |
| Height Contact Face Outerring H1 Upper Tolerance (Height Conta) | 0.225 mm | |
| Outside Diameter D3 (D3) | 563 mm | |
| Flange Diameter Lower Tolerance (Flange Diame) | -0.028 mm | |
| Bore Diameter Upper Tolerance (Bore Diamete) | 0 mm | |
| Height Contact Face Outerring H1 Lower Tolerance (Height Conta) | -0.225 mm | |
| Screw Tightening Torque (Ma) | 34 Nm | |
| Pitch Separation Angle (T) | 7.5 ° | |
| Height Contact Face Outer Ring (H1) | 46 mm | |
| Fixing Holes Diameter Outer Ring (D3) | 9.3 mm | |
| Counterbore Depth Of Fixing Holes (A) | 8.2 mm | |
| Tilting Rigidity Of Rolling Element Set (Ckw) | 223,000 Nm/mrad | |
| Radial Rigidity Of Rolling Element Set (Crw) | 1,100 N/µm | |
| Flange Diameter Upper Tolerance (Flange Diame) | 0 mm | |
| Pitch Circle Diameter Fixing Holes In Inner Ring (J) | 482 mm | |
| Axial Rigidity Of Bearing Position (Cal) | 5,300 N/µm | |
| Axial Rigidity Of Rolling Element Set (Cal) | 7,100 N/µm | |
| Fixing Holes Diameter Inner Ring (D1) | 9.3 mm | |
| Pitch Circle Diameter Fixing Holes In Outer Ring (J1) | 580 mm | |
| Radial Rigidity Of Bearing Position (Crl) | 1,100 N/µm | |
| Outside Diameter D1 (D1) | 560 mm | |
| Rib Diameter Inner Ring (D2) | 520 mm |