Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications10 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | ZARN90180 | |
| Bore diameter | d | 90 mm |
| Outside diameter | D | 180 mm |
| Width | B | 110 mm |
| Basic dynamic load rating | C | 98 kN |
| Basic static load rating | C0 | 210 kN |
| Fatigue load limit | Pu | 29 kN |
| Mass | ≈m | 12.356 kg |
| Minimum operating temperature | Tmin | -30 °C |
| Maximum operating temperature | Tmax | 120 °C |
Manufacturer Identity4 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 398027 | |
| Brand | INA | |
| Base Type | ZARN90180 | |
| X Life Marking | n.r. |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Needle roller/axial cylindrical roller bearings ZARN, double direction | |
| Short Description | Needle roller/axial cylindrical roller bearing |
Technical Data28 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter (D) | 90 mm | |
| Outside Diamater (D) | 180 mm | |
| Hight (H) | 110 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 98,000 N | |
| Basic Static Load Rating, Radial (C0R) | 210,000 N | |
| Basic Dynamic Load Rating, Axial (Ca) | 325,000 N | |
| Basic Static Load Rating, Axial (C0A) | 1,030,000 N | |
| Height Outer Ring Over Wave Washer (H1) | 72.5 mm | |
| Operating Temperature Min. (Tmin) | -30 °C | |
| Limiting Speed For Grease Lubrication (Ng Grea) | 700 1/min | |
| Tilting Stiffness (Ckl) | 14,500 Nm/mrad | |
| Minimum Diameter Shaft Shoulder (Da) | 130 mm | |
| Limiting Speed (Ng Oil) | 1,800 1/min | |
| Operating Temperature Max. (Tmax) | 120 °C | |
| Fatigue Load Limit, Axial (Cua) | 95,000 N | |
| Maximum Diameter Of Housing Shoulder (Da) | 161 mm | |
| Width, Outer Ring (C) | 35 mm | |
| Minimum Chamfer Dimension (R1 Min) | 1 mm | |
| Rip Diameter Shaft Washer (D1) | 160 mm | |
| Width Inner Ring (B) | 22.5 mm | |
| Rigidity Axial (Cal) | 7,700 N/µm | |
| Required Locknut Force (Required Loc) | 100,669 N | |
| Bearing Friction Torque (Mrl) | 10.5 Nm | |
| Tightening Torque Nut (Ma) | 960 Nm | |
| Minimum Chamfer Dimension (Rmin) | 0.3 mm | |
| Axial Runout (Axial Runout) | 2 µm | |
| Mass Moment Of Inertia (Mm) | 312 kg*cm2 | |
| Fatigue Load Limit, Radial (Cur) | 29,000 N |
