Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications10 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | ZARN3585 | |
| Bore diameter | d | 35 mm |
| Outside diameter | D | 85 mm |
| Width | B | 66 mm |
| Basic dynamic load rating | C | 27.5 kN |
| Basic static load rating | C0 | 53 kN |
| Fatigue load limit | Pu | 7.6 kN |
| Mass | ≈m | 1.618 kg |
| Minimum operating temperature | Tmin | -30 °C |
| Maximum operating temperature | Tmax | 120 °C |
Manufacturer Identity4 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 398003 | |
| Brand | INA | |
| Base Type | ZARN3585 | |
| X Life Marking | n.r. |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Needle roller/axial cylindrical roller bearings ZARN, double direction | |
| Short Description | Needle roller/axial cylindrical roller bearing |
Technical Data28 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter (D) | 35 mm | |
| Outside Diamater (D) | 85 mm | |
| Hight (H) | 66 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 27,500 N | |
| Basic Static Load Rating, Radial (C0R) | 53,000 N | |
| Basic Dynamic Load Rating, Axial (Ca) | 105,000 N | |
| Basic Static Load Rating, Axial (C0A) | 265,000 N | |
| Height Outer Ring Over Wave Washer (H1) | 43 mm | |
| Operating Temperature Min. (Tmin) | -30 °C | |
| Limiting Speed For Grease Lubrication (Ng Grea) | 1,250 1/min | |
| Tilting Stiffness (Ckl) | 1,300 Nm/mrad | |
| Minimum Diameter Shaft Shoulder (Da) | 60 mm | |
| Limiting Speed (Ng Oil) | 4,000 1/min | |
| Operating Temperature Max. (Tmax) | 120 °C | |
| Fatigue Load Limit, Axial (Cua) | 22,900 N | |
| Maximum Diameter Of Housing Shoulder (Da) | 74 mm | |
| Width, Outer Ring (C) | 20 mm | |
| Minimum Chamfer Dimension (R1 Min) | 0.6 mm | |
| Rip Diameter Shaft Washer (D1) | 73 mm | |
| Width Inner Ring (B) | 14 mm | |
| Rigidity Axial (Cal) | 3,500 N/µm | |
| Required Locknut Force (Required Loc) | 27,480 N | |
| Bearing Friction Torque (Mrl) | 2.3 Nm | |
| Tightening Torque Nut (Ma) | 100 Nm | |
| Minimum Chamfer Dimension (Rmin) | 0.3 mm | |
| Axial Runout (Axial Runout) | 1 µm | |
| Mass Moment Of Inertia (Mm) | 8.47 kg*cm2 | |
| Fatigue Load Limit, Radial (Cur) | 7,600 N |
