Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 100 mm |
| Outside diameter | D | 185 mm |
| Width | B | 38 mm |
| Basic dynamic load rating | C | 21.5 kN |
| Basic static load rating | C0 | 68 kN |
| Limiting speed | nG | 280 r/min |
| Mass | ≈m | 3.54 kg |
| Minimum operating temperature | Tmin | -30 °C |
| Maximum operating temperature | Tmax | 120 °C |
Manufacturer Identity3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 4123074 | |
| Brand | INA | |
| Base Type | YRTA100 |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Axial/radial bearings, double direction, for screw mounting, for Automation applications | |
| Short Description | Axial/radial roller bearing |
Technical Data36 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter (D) | 100 mm | |
| Outside Diamater (D) | 185 mm | |
| Total Height (H) | 38 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 21,500 N | |
| Basic Static Load Rating, Radial (C0R) | 68,000 N | |
| Basic Dynamic Load Rating, Axial (Ca) | 93,000 N | |
| Basic Static Load Rating, Axial (C0A) | 455,000 N | |
| Tilting Rigidity Of Bearing Position (Ckl) | 12,200 Nm/mrad | |
| Operating Temperature Min. (Tmin) | -30 °C | |
| Operating Temperature Max. (Tmax) | 120 °C | |
| Limiting Speed (Limiting Spe) | 280 1/min | |
| Pitch Quantity (N) | 18 | |
| Bore Diameter Lower Tolerance (Bore Diamete) | -0.01 mm | |
| Width Of Outer Ring (C) | 12 mm | |
| Diameter Of Recess For Fixing Holes (D2) | 122 mm | |
| Height Contact Face Outerring H1 Upper Tolerance (Height Conta) | 0.025 mm | |
| Maximum Diameter Inner Ring (D1 Max) | 161 mm | |
| Bore Diameter Upper Tolerance (Bore Diamete) | 0 mm | |
| Height Contact Face Outerring H1 Lower Tolerance (Height Conta) | -0.025 mm | |
| Screw Tightening Torque (Ma) | 8.5 Nm | |
| Pitch Separation Angle (T) | 20 ° | |
| Height Contact Face Outer Ring (H1) | 25 mm | |
| Outside Diameter Lower Tolerance (Outside Diam) | -0.015 mm | |
| Fixing Holes Diameter Outer Ring (D3) | 5.6 mm | |
| Counterbore Depth Of Fixing Holes (A) | 5.4 mm | |
| Tilting Rigidity Of Rolling Element Set (Ckw) | 23,500 Nm/mrad | |
| Radial Rigidity Of Rolling Element Set (Crw) | 5,200 N/µm | |
| Bearing Friction Torque At 5 1/Min (Mr) | 4.5 Nm | |
| Pitch Circle Diameter Fixing Holes In Inner Ring (J) | 112 mm | |
| Axial Rigidity Of Bearing Position (Cal) | 5,300 N/µm | |
| Axial Rigidity Of Rolling Element Set (Cal) | 8,700 N/µm | |
| Fixing Holes Diameter Inner Ring (D1) | 5.6 mm | |
| Pitch Circle Diameter Fixing Holes In Outer Ring (J1) | 170 mm | |
| Radial Rigidity Of Bearing Position (Crl) | 3,150 N/µm | |
| Height Contact Face Outer Ring (H2) | 13 mm | |
| Outside Diameter Upper Tolerance (Outside Diam) | 0 mm |
