Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 150 mm |
| Outside diameter | D | 225 mm |
| Width | B | 25.4 mm |
| Basic dynamic load rating | C | 49.5 kN |
| Basic static load rating | C0 | 130 kN |
| Limiting speed | nG | 203 r/min |
| Mass | ≈m | 3.55 kg |
| Minimum operating temperature | Tmin | -30 °C |
| Maximum operating temperature | Tmax | 80 °C |
Manufacturer Identity3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 398466 | |
| Brand | INA | |
| Base Type | XSU080188 |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Crossed roller bearings standard series 08, without gear teeth, lamellar seals on both sides | |
| Short Description | Slewing ring, Crossed roller bearing, without gear teeth |
Technical Data28 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter (D1) | 150 mm | |
| Outside Diameter (Da) | 225 mm | |
| Total Height (H) | 25.4 mm | |
| Basic Static Load Rating, Axial (C0A) | 265,000 N | |
| Height Of Individual Ring (H) | 24.8 mm | |
| Operating Temperature Min. (Tmin) | -30 °C | |
| Pitch Circle Diameter Fixing Holes (La) | 210 mm | |
| Basic Dynamic Load Rating, Axial (Ca) | 70,000 N | |
| Operating Temperature Max. (Tmax) | 80 °C | |
| Limiting Speed (Limiting Spe) | 203 1/min | |
| Pitchcircle Diameter Fixing Holes Inner Ring (Li) | 165 mm | |
| Bore Diameter Lower Tolerance (Bore Diamete) | 0 mm | |
| Inner Diameter Outer Ring (Di) | 194 mm | |
| Groove Radius (Rgroove) | 5 mm | |
| Number Of Fixing Holes In Inner Ring (Ni) | 16 | |
| Fixing Bore (Db) | 6.8 mm | |
| Outside Diameter Inner Ring (Da) | 179 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 49,500 N | |
| Countersunk Depth Of Fixing Holes (Ts) | 6.8 mm | |
| Running Accuracy A (Related To The Raceway) (Running Accu) | 0.01 mm | |
| Bore Diameter Upper Tolerance (Bore Diamete) | 0.025 mm | |
| Countersunk Diameter Of Fixing Holes (Ds) | 11 mm | |
| Outside Diameter Lower Tolerance (Outside Diam) | -0.029 mm | |
| Basic Static Load Rating, Radial (C0R) | 130,000 N | |
| Max. Radial Load Screws (Frictional Contact) (Fr Zul) | 10,900 N | |
| Width Outer Ring (Ha) | 24.8 mm | |
| Number Of Fixing Holes In Outer Ring (Na) | 16 | |
| Outside Diameter Upper Tolerance (Outside Diam) | 0 mm |
