99,016 bearing records · search, filter and compare

INA / Needle roller bearings

INA RNA4907-RSR-XL

Needle roller bearings technical reference with manufacturer-sourced dimensions, characteristics and engineering resources.

Technical data available
Bore diameterd
42 mm
Outside diameterD
55 mm
WidthB
20 mm
Dynamic load ratingC
29.5 kN
Static load ratingC0
39.5 kN
Limiting speednG
6400 r/min

Use this page as a technical reference. Verify the current manufacturer specification and the complete application requirements before selection.

Technical data

Product specifications

Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.

Core specifications11 parameters
Core specifications
ParameterSymbolValue
SeriesRNA4907
Bore diameterd42 mm
Outside diameterD55 mm
WidthB20 mm
Basic dynamic load ratingC29.5 kN
Basic static load ratingC039.5 kN
Fatigue load limitPu7.4 kN
Limiting speednG6400 r/min
Mass≈m0.108 kg
Minimum operating temperatureTmin-20 °C
Maximum operating temperatureTmax100 °C
Manufacturer Identity4 parameters
Manufacturer Identity
ParameterSymbolValue
Schaeffler Product Code393966
BrandINA
Base TypeRNA4907
X Life MarkingXL
Product Identity2 parameters
Product Identity
ParameterSymbolValue
ConstructionNeedle roller bearings RNA..-RSR, lip seal on one side
Short DescriptionNeedle roller bearing
Technical Data10 parameters
Technical Data
ParameterSymbolValue
Under Roller Diameter (Fw)42 mm
Outside Diamater (D)55 mm
Width, Outer Ring (C)20 mm
Basic Dynamic Load Rating, Radial (Cr)29,500 N
Basic Static Load Rating, Radial (C0R)39,500 N
Operating Temperature Min. (Tmin)-20 °C
Operating Temperature Max. (Tmax)100 °C
Limiting Speed (Limiting Spe)6,400 1/min
Minimum Chamfer Dimension (Rmin)0.6 mm
Fatigue Load Limit, Radial (Cur)7,400 N

Technical documents & data sheet

This product page is a BearingScope catalogue reference, not a manufacturer-certified drawing. Preserve the full brand and designation when comparing files.

Record identity
INA RNA4907-RSR-XL
Document matching
Exact designation, assembly scope, revision and units must agree.

No verified redistributable CAD or manufacturer PDF is registered for this exact model. A catalogue image is not a dimensioned drawing. Missing technical files are not generated or replaced with unrelated models.

Look up another model or check drawing requirements →

Search the consolidated catalogue

Find, filter and compare bearing model data in one place.

Open model search