Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications6 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 14 mm |
| Outside diameter | D | 26 mm |
| Width | B | 1.5 mm |
| Mass | ≈m | 0.003888 kg |
| Minimum operating temperature | Tmin | -200 °C |
| Maximum operating temperature | Tmax | 280 °C |
Manufacturer Identity4 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 349017 | |
| Brand | INA | |
| Base Type | EGW14-E40 | |
| X Life Marking | n.r. |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Thrust washer, maintenance-free, material in accordance with ISO 3547-4, with steel backing | |
| Short Description | Thrust washer |
Technical Data25 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Inner Diameter (Di) | 14 mm | |
| Outer Diameter (Do) | 26 mm | |
| Wall Thickness (S3) | 1.5 mm | |
| Basic Dynamic Load Rating, Axial (Ca) | 52,800 N | |
| Basic Static Load Rating, Axial (C0A) | 94,200 N | |
| Mounting Dimension D 6A, Lower Tolerance (D6A Ut) | 0 mm | |
| Fixing Hole Diameter (D1) | 2 mm | |
| Operating Temperature Min. (Tmin) | -200 °C | |
| Operating Temperature Max. (Tmax) | 280 °C | |
| Pitch Circle (J) | 20 mm | |
| Inner Diameter, Lower Tolerance (Dut) | 0 mm | |
| Inner Diameter, Upper Tolerance (Di Ot) | 0.25 mm | |
| Mounting Dimension (Ta) | 1 mm | |
| Wall Thickness Lower Tolerance (S3 Ut) | -0.05 mm | |
| Mounting Dimension, Upper Tolerance (Ta Ot) | 0.2 mm | |
| Outer Dismeter, Upper Tolerance (Dot) | 0 mm | |
| Mounting Dimension D 6A (D6A) | 26 mm | |
| Fixing Hole Diameter, Upper Tolerance (D1 Ot) | 0.4 mm | |
| Fixing Hole Diameter, Lower Tolerance (D1 Ut) | 0.1 mm | |
| Wall Thickness Upper Tolerance (S3 Ot) | 0 mm | |
| Outer Diameter, Lower Tolerance (Dut) | -0.25 mm | |
| Pitch Circle, Upper Tolerance (Jot) | 0.12 mm | |
| Mounting Dimension, Lower Tolerance (Ta Ut) | -0.2 mm | |
| Mounting Dimension D 6A, Upper Tolerance (D6A Ot) | 0.12 mm | |
| Pitch Circle, Lower Tolerance (Jut) | -0.12 mm |
