Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications14 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | WS22211 | |
| Bore diameter | d | 55 mm |
| Outside diameter | D | 100 mm |
| Width | B | 31 mm |
| Basic dynamic load rating | C | 129 kN |
| Basic static load rating | C0 | 130 kN |
| Fatigue load limit | Pu | 17.7 kN |
| Limiting speed | nG | 2250 r/min |
| Mass | ≈m | 0.988 kg |
| Internal clearance | CN (Group N) — Normal internal clearance | |
| Sealing | 2RSR — Seals on both sides, normal temperature | |
| Cage | JPA — Sheet metal cage | |
| Minimum operating temperature | Tmin | -30 °C |
| Maximum operating temperature | Tmax | 100 °C |
Product characteristics7 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Design | E1 | Without central rip |
| Bore type | Z | Cylindrical |
| Cage | JPA | Sheet metal cage |
| Radial internal clearance | CN (Group N) | Normal internal clearance |
| Relubrication feature | Standard | |
| Type of Seal | 2RSR | Seals on both sides, normal temperature |
| Sealing - excess width | WS | Sealing - excess width |
Main Dimensions & Performance Data8 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 55 mm2.165 in |
| Outside diameter | D | 100 mm3.937 in |
| Width | B | 31 mm1.22 in |
| Basic dynamic load rating, radial | Cr | 129,000 N29,001.799 lbf |
| Basic static load rating, radial | C0r | 130,000 N29,226.619 lbf |
| Fatigue load limit, radial | Cur | 17,700 N3,979.317 lbf |
| Limiting speed | nG | 2,250 1/min |
| Mass | ≈m | 0.988 kg2.178 lbs |
Mounting dimensions3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 63.5 mm2.5 in |
| Maximum diameter of housing shoulder | Da max | 91.9 mm3.618 in |
| Maximum recess radius | ra max | 1.5 mm0.059 in |
Dimensions5 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum chamfer dimension | rmin | 1.5 mm0.059 in |
| Bore diameter outer ring | D1 | 91.9 mm3.618 in |
| Raceway diameter of the inner ring | d2 | 63.5 mm2.5 in |
| Diameter lubrication hole | ds | 3.2 mm0.126 in |
| Width of lubricating groove | ns | 4.8 mm0.189 in |
Temperature range2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Operating temperature min. | Tmin | -30 °C-22 °F |
| Operating temperature max. | Tmax | 100 °C212 °F |
Calculation factors4 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Y | e | 0.21 |
| Dynamic axial load factor | Y1 | 3.17 |
| Dynamic axial load factor | Y2 | 4.72 |
| Static axial load factor | Y0 | 3.1 |
Capabilities & suitability8 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial load capacity | Yes | |
| Axial load capacity in one direction | Yes | |
| Axial load capacity in both directions | Yes | |
| Lifetimelubricationfreedomfrommaintenance | Yes | |
| Suitable for grease lubrication | Yes | |
| Sealedonbothsides | Yes | |
| Staticangularerrorandmisalignment | Yes | |
| Dynamicangularerrorandmisalignment | Yes |
Manufacturer Identity10 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 388394 | |
| Brand | FAG | |
| Base Type | WS22211 | |
| Old Designation | ["WS22211-E1-2RSR"] | |
| X Life Marking | XL | |
| SAP material number | 0800241570000 | |
| Base product | 2305091103 | |
| Bearing X designation | WS22211-E1-XL-2RSR | |
| Mounting Manager ID | WS22211-E1-XL-2RSR | |
| Grease application ID | WS22211-E1-XL-2RSR |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Sealed spherical roller bearings WS222..-E1, lip seals on both sides, for continuous casting machines | |
| Short Description | Spherical Roller Bearing |
Technical Data21 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter (D) | 55 mm | |
| Outside Diamater (D) | 100 mm | |
| Total Width (B) | 31 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 129,000 N | |
| Basic Static Load Rating, Radial (C0R) | 130,000 N | |
| Diameter Lubrication Hole (Ds) | 3.2 mm | |
| Operating Temperature Min. (Tmin) | -30 °C | |
| Minimum Diameter Shaft Shoulder (Da) | 63.5 mm | |
| Operating Temperature Max. (Tmax) | 100 °C | |
| Limiting Speed (Limiting Spe) | 2,250 1/min | |
| Maximum Recess Radius (Ra Max) | 1.5 mm | |
| Maximum Diameter Of Housing Shoulder (Da) | 91.9 mm | |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | 0.21 | |
| Width Of Lubricating Groove (Ns) | 4.8 mm | |
| Dynamic Axial Load Factor (Y1) | 3.17 | |
| Bore Diameter Outer Ring (D1) | 91.9 mm | |
| Raceway Diameter Of The Inner Ring (D2) | 63.5 mm | |
| Minimum Chamfer Dimension (Rmin) | 1.5 mm | |
| Static Axial Load Factor (Y0) | 3.1 | |
| Dynamic Axial Load Factor (Y2) | 4.72 | |
| Fatigue Load Limit, Radial (Cur) | 17,700 N |
