Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications14 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | WS22207 | |
| Bore diameter | d | 35 mm |
| Outside diameter | D | 72 mm |
| Width | B | 28 mm |
| Basic dynamic load rating | C | 89 kN |
| Basic static load rating | C0 | 81 kN |
| Fatigue load limit | Pu | 9.7 kN |
| Limiting speed | nG | 2700 r/min |
| Mass | ≈m | 0.52 kg |
| Internal clearance | CN (Group N) — Normal internal clearance | |
| Sealing | 2RSR — Seals on both sides, normal temperature | |
| Cage | JPA — Sheet metal cage | |
| Minimum operating temperature | Tmin | -30 °C |
| Maximum operating temperature | Tmax | 100 °C |
Product characteristics7 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Design | E1 | Without central rip |
| Bore type | Z | Cylindrical |
| Cage | JPA | Sheet metal cage |
| Radial internal clearance | CN (Group N) | Normal internal clearance |
| Relubrication feature | Standard | |
| Type of Seal | 2RSR | Seals on both sides, normal temperature |
| Sealing - excess width | WS | Sealing - excess width |
Main Dimensions & Performance Data8 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 35 mm1.378 in |
| Outside diameter | D | 72 mm2.835 in |
| Width | B | 28 mm1.102 in |
| Basic dynamic load rating, radial | Cr | 89,000 N20,008.993 lbf |
| Basic static load rating, radial | C0r | 81,000 N18,210.432 lbf |
| Fatigue load limit, radial | Cur | 9,700 N2,180.755 lbf |
| Limiting speed | nG | 2,700 1/min |
| Mass | ≈m | 0.52 kg1.146 lbs |
Mounting dimensions3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 40.1 mm1.579 in |
| Maximum diameter of housing shoulder | Da max | 65 mm2.559 in |
| Maximum recess radius | ra max | 1 mm0.039 in |
Dimensions5 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum chamfer dimension | rmin | 1.1 mm0.043 in |
| Bore diameter outer ring | D1 | 64.2 mm2.528 in |
| Raceway diameter of the inner ring | d2 | 40.1 mm1.579 in |
| Diameter lubrication hole | ds | 3.2 mm0.126 in |
| Width of lubricating groove | ns | 4.8 mm0.189 in |
Temperature range2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Operating temperature min. | Tmin | -30 °C-22 °F |
| Operating temperature max. | Tmax | 100 °C212 °F |
Calculation factors4 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Y | e | 0.31 |
| Dynamic axial load factor | Y1 | 2.21 |
| Dynamic axial load factor | Y2 | 3.29 |
| Static axial load factor | Y0 | 2.16 |
Capabilities & suitability8 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial load capacity | Yes | |
| Axial load capacity in one direction | Yes | |
| Axial load capacity in both directions | Yes | |
| Lifetimelubricationfreedomfrommaintenance | Yes | |
| Suitable for grease lubrication | Yes | |
| Sealedonbothsides | Yes | |
| Staticangularerrorandmisalignment | Yes | |
| Dynamicangularerrorandmisalignment | Yes |
Manufacturer Identity10 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 388383 | |
| Brand | FAG | |
| Base Type | WS22207 | |
| Old Designation | ["WS22207-E1-2RSR"] | |
| X Life Marking | XL | |
| SAP material number | 0800218910000 | |
| Base product | 2305091103 | |
| Bearing X designation | WS22207-E1-XL-2RSR | |
| Mounting Manager ID | WS22207-E1-XL-2RSR | |
| Grease application ID | WS22207-E1-XL-2RSR |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Sealed spherical roller bearings WS222..-E1, lip seals on both sides, for continuous casting machines | |
| Short Description | Spherical Roller Bearing |
Technical Data21 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter (D) | 35 mm | |
| Outside Diamater (D) | 72 mm | |
| Total Width (B) | 28 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 89,000 N | |
| Basic Static Load Rating, Radial (C0R) | 81,000 N | |
| Diameter Lubrication Hole (Ds) | 3.2 mm | |
| Operating Temperature Min. (Tmin) | -30 °C | |
| Minimum Diameter Shaft Shoulder (Da) | 40.1 mm | |
| Operating Temperature Max. (Tmax) | 100 °C | |
| Limiting Speed (Limiting Spe) | 2,700 1/min | |
| Maximum Recess Radius (Ra Max) | 1 mm | |
| Maximum Diameter Of Housing Shoulder (Da) | 65 mm | |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | 0.31 | |
| Width Of Lubricating Groove (Ns) | 4.8 mm | |
| Dynamic Axial Load Factor (Y1) | 2.21 | |
| Bore Diameter Outer Ring (D1) | 64.2 mm | |
| Raceway Diameter Of The Inner Ring (D2) | 40.1 mm | |
| Minimum Chamfer Dimension (Rmin) | 1.1 mm | |
| Static Axial Load Factor (Y0) | 2.16 | |
| Dynamic Axial Load Factor (Y2) | 3.29 | |
| Fatigue Load Limit, Radial (Cur) | 9,700 N |
