Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications13 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | VCM7008 | |
| Bore diameter | d | 40 mm |
| Outside diameter | D | 68 mm |
| Width | B | 15 mm |
| Basic dynamic load rating | C | 28.5 kN |
| Basic static load rating | C0 | 8 kN |
| Fatigue load limit | Pu | 0.41 kN |
| Mass | ≈m | 0.1831 kg |
| Precision class | P4S — Tolerance class P4S, FAG standard better than P4 to ISO 492:2023 | |
| Sealing | Without — Not sealed | |
| Cage | T — Laminated fabric cage | |
| Minimum operating temperature | Tmin | -30 °C |
| Maximum operating temperature | Tmax | 100 °C |
Product characteristics6 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Preload class | L | Preload light |
| Contact angle | Contact angle 17° | |
| Type of Seal | Without | Not sealed |
| Cage | T | Laminated fabric cage |
| Tolerance class | P4S | Tolerance class P4S, FAG standard better than P4 to ISO 492:2023 |
| Arrangement bearing set | U | Single bearing |
Main Dimensions & Performance Data9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 40 mm1.575 in |
| Outside diameter | D | 68 mm2.677 in |
| Width | B | 15 mm0.591 in |
| Basic dynamic load rating, radial | Cr | 28,500 N6,407.374 lbf |
| Basic static load rating, radial | C0r | 8,000 N1,798.561 lbf |
| Fatigue load limit, radial | Cur | 410 N92.176 lbf |
| Limiting speed for grease lubrication | nG Grease | 38,000 1/min |
| Limiting speed for oil lubrication | nG Oil | 60,000 1/min |
| Mass | ≈m | 183.1 g6.459 oz |
Mounting dimensions11 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Diameter shaft shoulder | da | 46 mm1.811 in |
| Diameter shaft shoulder clearance | da | h12 |
| Shoulder diameter outer ring | Da | 62 mm2.441 in |
| Shoulder diameter outer ring clearance | Da | H12 |
| Maximum recess radius | ra max | 1 mm0.039 in |
| Maximum recess radius | ra1 max | 0.3 mm0.012 in |
| Minimum diameter injection pitch | Etk min | 50.2 mm1.976 in |
| Maximum diameter injection pitch | Etk max | 52.1 mm2.051 in |
| Minimum diameter injection pitch | Etk1 min | 47.8 mm1.882 in |
| Maximum diameter injection pitch | Etk1 max | 52.1 mm2.051 in |
| Distance between the apexes of the pressure cones | a | 15.8 mm0.622 in |
Dimensions3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum chamfer dimension | rmin | 1 mm0.039 in |
| Minimum chamfer dimension | r1 min | 0.6 mm0.024 in |
| Contact angle | α | 17 ° |
Temperature range2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Operating temperature min. | Tmin | -30 °C-22 °F |
| Operating temperature max. | Tmax | 100 °C212 °F |
Capabilities & suitability5 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial load capacity | Yes | |
| Axial load capacity in one direction | Yes | |
| Suitable for grease lubrication | Yes | |
| Suitable for oil lubrication | Yes | |
| Unsealed design | Yes |
Manufacturer Identity7 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 819956 | |
| Brand | FAG | |
| Base Type | VCM7008 | |
| SAP material number | 0932506140000 | |
| Base product | 2305080314 | |
| Bearing X designation | VCM7008-C-T-P4S-XL | |
| Mounting Manager ID | VCM7008-C-T-P4S-XL |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | High speed spindle bearing VCM70..-C, adjusted, in pairs or sets, contact angle α = 17°, with ceramic balls, rings made from Vacrodur, restricted tolerances | |
| Short Description | High speed spindle bearing |
Additional information9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Preload force light | FV L | 40 N8.993 lbf |
| Preload force medium | FV M | 105 N23.606 lbf |
| Preload force heavy | FV H | 220 N49.46 lbf |
| Lift-off force light | KaE L | 116 N26.079 lbf |
| Lift-off force medium | KaE M | 311 N69.919 lbf |
| Lift-off force heavy | KaE H | 668 N150.18 lbf |
| Axial rigidity light | ca L | 37 N/µm |
| Axial rigidity medium | ca M | 53 N/µm |
| Axial rigidity heavy | ca H | 71 N/µm |
Technical Data31 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter (D) | 40 mm | |
| Outside Diameter (D) | 68 mm | |
| Width (B) | 15 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 28,500 N | |
| Basic Static Load Rating, Radial (C0R) | 8,000 N | |
| Operating Temperature Min. (Tmin) | -30 °C | |
| Operating Temperature Max. (Tmax) | 100 °C | |
| Axial Rigidity Heavy (Ca H) | 71 N/µm | |
| Axial Rigidity Light (Ca L) | 37 N/µm | |
| Axial Rigidity Medium (Ca M) | 53 N/µm | |
| Diameter Shaft Shoulder (Da) | 46 mm | |
| Lift Off Force Heavy (Kae H) | 668 N | |
| Lift Off Force Light (Kae L) | 116 N | |
| Lift Off Force Medium (Kae M) | 311 N | |
| Limiting Speed For Oil Lubrication (Ng Oil) | 60,000 1/min | |
| Maximum Diameter Injection Pitch (Etk1 Ma) | 52.1 mm | |
| Maximum Diameter Injection Pitch (Etk Max) | 52.1 mm | |
| Minimum Diameter Injection Pitch (Etk1 Mi) | 47.8 mm | |
| Preload Force Heavy (Fv H) | 220 N | |
| Preload Force Light (Fv L) | 40 N | |
| Preload Force Medium (Fv M) | 105 N | |
| Shoulder Diameter Outer Ring (Da) | 62 mm | |
| Limiting Speed For Grease Lubrication (Ng Grea) | 38,000 1/min | |
| Minimum Diameter Injection Pitch (Etk Min) | 50.2 mm | |
| Fatigue Load Limit, Radial (Cur) | 410 N | |
| Minimum Chamfer Dimension (Rmin) | 1 mm | |
| Maximum Fillet Radius (Ra Max) | 1 mm | |
| Maximum Recess Radius (Ra1 Max) | 0.3 mm | |
| Minimum Chamfer Dimension (R1 Min) | 0.6 mm | |
| Contact Angle (Α) | 17 ° | |
| Distance Between The Apexes Of The Pressure Cones (A) | 15.8 mm |
