Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications14 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | QJ317 | |
| Bore diameter | d | 85 mm |
| Outside diameter | D | 180 mm |
| Width | B | 41 mm |
| Basic dynamic load rating | C | 248 kN |
| Basic static load rating | C0 | 255 kN |
| Fatigue load limit | Pu | 12.8 kN |
| Reference speed | nref | 3550 r/min |
| Limiting speed | nG | 6600 r/min |
| Mass | ≈m | 5.362 kg |
| Precision class | PN — Normal (ISO 492:2023) | |
| Cage | MPA — Solid brass cage, outer ring guided | |
| Minimum operating temperature | Tmin | -30 °C |
| Maximum operating temperature | Tmax | 150 °C |
Product characteristics5 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Design, bearing outer ring | N2 | Two retaining grooves in the outer ring on one side |
| Tolerance class | PN | Normal (ISO 492:2023) |
| Cage | MPA | Solid brass cage, outer ring guided |
| Dimensional / heat stabilization | S0 | Rings dimensional stabilized up to 150° |
| Axial internal clearance | CN | Group N (CN) |
Main Dimensions & Performance Data9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 85 mm3.346 in |
| Outside diameter | D | 180 mm7.087 in |
| Width | B | 41 mm1.614 in |
| Basic dynamic load rating, radial | Cr | 248,000 N55,755.396 lbf |
| Basic static load rating, radial | C0r | 255,000 N57,329.137 lbf |
| Fatigue load limit, radial | Cur | 12,800 N2,877.698 lbf |
| Limiting speed | nG | 6,600 1/min |
| Reference speed | nϑr | 3,550 1/min |
| Mass | ≈m | 5.362 kg11.821 lbs |
Mounting dimensions3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 99 mm3.898 in |
| Maximum diameter of housing shoulder | Da max | 166 mm6.535 in |
| Maximum fillet radius | ra max | 2.5 mm0.098 in |
Dimensions9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum chamfer dimension | rmin | 3 mm0.118 in |
| Shoulder diameter outer ring | D1 | 148.7 mm5.854 in |
| Shoulder diameter inner ring | d1 | 117.94 mm4.643 in |
| Distance between the apexes of the pressure cones | a | 92.8 mm3.654 in |
| Hight retaining slot | an | 11.7 mm0.461 in |
| Width retaining slot | bn | 10.5 mm0.413 in |
| Radius retaining slot | rn | 2 mm0.079 in |
| Angle retaining slot | 45 ° | |
| Contact angle | α | 35 ° |
Temperature range2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Operating temperature min. | Tmin | -30 °C-22 °F |
| Operating temperature max. | Tmax | 150 °C302 °F |
Capabilities & suitability6 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial load capacity | Yes | |
| Axial load capacity in one direction | Yes | |
| Axial load capacity in both directions | Yes | |
| Suitable for grease lubrication | Yes | |
| Suitable for oil lubrication | Yes | |
| Unsealed design | Yes |
Manufacturer Identity9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 366728 | |
| Brand | FAG | |
| Base Type | QJ317 | |
| Old Designation | ["QJ317N2MPA"] | |
| SAP material number | 0192623100000 | |
| Base product | 230508AD41 | |
| Bearing X designation | QJ317-N2-MPA | |
| Mounting Manager ID | QJ317-N2-MPA | |
| Grease application ID | QJ317-N2-MPA |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Four point contact bearing QJ3..-N2-MPA, holding grooves, solid brass cage | |
| Short Description | Four-point contact bearing |
Technical Data22 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter (D) | 85 mm | |
| Outside Diameter (D) | 180 mm | |
| Width (B) | 41 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 248,000 N | |
| Basic Static Load Rating, Radial (C0R) | 255,000 N | |
| Operating Temperature Min. (Tmin) | -30 °C | |
| Limiting Speed (Ng) | 6,600 1/min | |
| Operating Temperature Max. (Tmax) | 150 °C | |
| Reference Speed (Nϑr) | 3,550 1/min | |
| Angle Retaining Slot (Angle Retain) | 45 ° | |
| Hight Retaining Slot (An) | 11.7 mm | |
| Radius Retaining Slot (Rn) | 2 mm | |
| Fatigue Load Limit, Radial (Cur) | 12,800 N | |
| Minimum Diameter Shaft Shoulder (Da Min) | 99 mm | |
| Shoulder Diameter Inner Ring (D1) | 117.94 mm | |
| Maximum Diameter Of Housing Shoulder (Da Max) | 166 mm | |
| Minimum Chamfer Dimension (Rmin) | 3 mm | |
| Maximum Fillet Radius (Ra Max) | 2.5 mm | |
| Shoulder Diameter Outer Ring (D1) | 148.7 mm | |
| Contact Angle (Α) | 35 ° | |
| Distance Between The Apexes Of The Pressure Cones (A) | 92.8 mm | |
| Width Retaining Slot (Bn) | 10.5 mm |
