Product specifications

Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.

Core specifications14 parameters

Core specifications
Parameter	Symbol	Value
Series		QJ315
Bore diameter	d	75 mm
Outside diameter	D	160 mm
Width	B	37 mm
Basic dynamic load rating	C	229 kN
Basic static load rating	C0	204 kN
Fatigue load limit	Pu	14.4 kN
Reference speed	nref	3900 r/min
Limiting speed	nG	8300 r/min
Mass	≈m	3.8 kg
Precision class		PN — Normal (ISO 492:2023)
Cage		MPA — Solid brass cage, outer ring guided
Minimum operating temperature	Tmin	-30 °C
Maximum operating temperature	Tmax	150 °C

Product characteristics5 parameters

Product characteristics
Parameter	Symbol	Value
Design, bearing outer ring	N2	Two retaining grooves in the outer ring on one side
Tolerance class	PN	Normal (ISO 492:2023)
Cage	MPA	Solid brass cage, outer ring guided
Dimensional / heat stabilization	S0	Rings dimensional stabilized up to 150°
Axial internal clearance	C3	Group 3 (C3), bigger than CN

Main Dimensions & Performance Data9 parameters

Main Dimensions & Performance Data
Parameter	Symbol	Value
Bore diameter	d	75 mm2.953 in
Outside diameter	D	160 mm6.299 in
Width	B	37 mm1.457 in
Basic dynamic load rating, radial	Cr	229,000 N51,483.813 lbf
Basic static load rating, radial	C0r	204,000 N45,863.309 lbf
Fatigue load limit, radial	Cur	14,400 N3,237.41 lbf
Limiting speed	nG	8,300 1/min
Reference speed	nϑr	3,900 1/min
Mass	≈m	3.8 kg8.378 lbs

Mounting dimensions3 parameters

Mounting dimensions
Parameter	Symbol	Value
Minimum diameter shaft shoulder	da min	87 mm3.425 in
Maximum diameter of housing shoulder	Da max	148 mm5.827 in
Maximum fillet radius	ra max	2.1 mm0.083 in

Dimensions9 parameters

Dimensions
Parameter	Symbol	Value
Minimum chamfer dimension	rmin	2.1 mm0.083 in
Shoulder diameter outer ring	D1	131 mm5.157 in
Shoulder diameter inner ring	d1	104.4 mm4.11 in
Distance between the apexes of the pressure cones	a	82.3 mm3.24 in
Hight retaining slot	an	10.1 mm0.398 in
Width retaining slot	bn	8.5 mm0.335 in
Radius retaining slot	rn	2 mm0.079 in
Angle retaining slot		45 °
Contact angle	α	35 °

Temperature range2 parameters

Temperature range
Parameter	Symbol	Value
Operating temperature min.	Tmin	-30 °C-22 °F
Operating temperature max.	Tmax	150 °C302 °F

Capabilities & suitability6 parameters

Capabilities & suitability
Parameter	Symbol	Value
Radial load capacity		Yes
Axial load capacity in one direction		Yes
Axial load capacity in both directions		Yes
Suitable for grease lubrication		Yes
Suitable for oil lubrication		Yes
Unsealed design		Yes

Manufacturer Identity10 parameters

Product Identity2 parameters

Product Identity
Parameter	Symbol	Value
Construction		Four point contact bearing QJ3..-XL-N2-MPA, X-life, holding grooves, solid brass cage
Short Description		Four-point contact bearing

Technical Data22 parameters

Technical Data
Parameter	Symbol	Value
Bore Diameter (D)		75 mm
Outside Diameter (D)		160 mm
Width (B)		37 mm
Basic Dynamic Load Rating, Radial (Cr)		229,000 N
Basic Static Load Rating, Radial (C0R)		204,000 N
Operating Temperature Min. (Tmin)		-30 °C
Limiting Speed (Ng)		8,300 1/min
Operating Temperature Max. (Tmax)		150 °C
Reference Speed (Nϑr)		3,900 1/min
Angle Retaining Slot (Angle Retain)		45 °
Hight Retaining Slot (An)		10.1 mm
Radius Retaining Slot (Rn)		2 mm
Fatigue Load Limit, Radial (Cur)		14,400 N
Minimum Diameter Shaft Shoulder (Da Min)		87 mm
Shoulder Diameter Inner Ring (D1)		104.4 mm
Maximum Diameter Of Housing Shoulder (Da Max)		148 mm
Minimum Chamfer Dimension (Rmin)		2.1 mm
Maximum Fillet Radius (Ra Max)		2.1 mm
Shoulder Diameter Outer Ring (D1)		131 mm
Contact Angle (Α)		35 °
Distance Between The Apexes Of The Pressure Cones (A)		82.3 mm
Width Retaining Slot (Bn)		8.5 mm

FAG QJ315-XL-N2-MPA-C3