Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications14 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | QJ222 | |
| Bore diameter | d | 110 mm |
| Outside diameter | D | 200 mm |
| Width | B | 38 mm |
| Basic dynamic load rating | C | 249 kN |
| Basic static load rating | C0 | 285 kN |
| Fatigue load limit | Pu | 12.7 kN |
| Reference speed | nref | 3350 r/min |
| Limiting speed | nG | 5900 r/min |
| Mass | ≈m | 5.66 kg |
| Precision class | PN — Normal (ISO 492:2023) | |
| Cage | MPA — Solid brass cage, outer ring guided | |
| Minimum operating temperature | Tmin | -30 °C |
| Maximum operating temperature | Tmax | 150 °C |
Product characteristics4 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Tolerance class | PN | Normal (ISO 492:2023) |
| Cage | MPA | Solid brass cage, outer ring guided |
| Dimensional / heat stabilization | S0 | Rings dimensional stabilized up to 150° |
| Axial internal clearance | CN | Group N (CN) |
Main Dimensions & Performance Data9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 110 mm4.331 in |
| Outside diameter | D | 200 mm7.874 in |
| Width | B | 38 mm1.496 in |
| Basic dynamic load rating, radial | Cr | 249,000 N55,980.216 lbf |
| Basic static load rating, radial | C0r | 285,000 N64,073.741 lbf |
| Fatigue load limit, radial | Cur | 12,700 N2,855.216 lbf |
| Limiting speed | nG | 5,900 1/min |
| Reference speed | nϑr | 3,350 1/min |
| Mass | ≈m | 5.66 kg12.478 lbs |
Mounting dimensions3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 122 mm4.803 in |
| Maximum diameter of housing shoulder | Da max | 188 mm7.402 in |
| Maximum fillet radius | ra max | 2.1 mm0.083 in |
Dimensions5 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum chamfer dimension | rmin | 2.1 mm0.083 in |
| Shoulder diameter outer ring | D1 | 169.8 mm6.685 in |
| Shoulder diameter inner ring | d1 | 141.74 mm5.58 in |
| Distance between the apexes of the pressure cones | a | 108.5 mm4.272 in |
| Contact angle | α | 35 ° |
Temperature range2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Operating temperature min. | Tmin | -30 °C-22 °F |
| Operating temperature max. | Tmax | 150 °C302 °F |
Capabilities & suitability6 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial load capacity | Yes | |
| Axial load capacity in one direction | Yes | |
| Axial load capacity in both directions | Yes | |
| Suitable for grease lubrication | Yes | |
| Suitable for oil lubrication | Yes | |
| Unsealed design | Yes |
Manufacturer Identity9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 366508 | |
| Brand | FAG | |
| Base Type | QJ222 | |
| Old Designation | ["QJ222MPA"] | |
| SAP material number | 0392895830000 | |
| Base product | 230508AD41 | |
| Bearing X designation | QJ222-MPA | |
| Mounting Manager ID | QJ222-MPA | |
| Grease application ID | QJ222-MPA |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Four point contact bearing QJ2..-MPA, solid brass cage | |
| Short Description | Four-point contact bearing |
Technical Data18 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter (D) | 110 mm | |
| Outside Diameter (D) | 200 mm | |
| Width (B) | 38 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 249,000 N | |
| Basic Static Load Rating, Radial (C0R) | 285,000 N | |
| Operating Temperature Min. (Tmin) | -30 °C | |
| Limiting Speed (Ng) | 5,900 1/min | |
| Operating Temperature Max. (Tmax) | 150 °C | |
| Reference Speed (Nϑr) | 3,350 1/min | |
| Fatigue Load Limit, Radial (Cur) | 12,700 N | |
| Minimum Diameter Shaft Shoulder (Da Min) | 122 mm | |
| Shoulder Diameter Inner Ring (D1) | 141.74 mm | |
| Maximum Diameter Of Housing Shoulder (Da Max) | 188 mm | |
| Minimum Chamfer Dimension (Rmin) | 2.1 mm | |
| Maximum Fillet Radius (Ra Max) | 2.1 mm | |
| Shoulder Diameter Outer Ring (D1) | 169.8 mm | |
| Contact Angle (Α) | 35 ° | |
| Distance Between The Apexes Of The Pressure Cones (A) | 108.5 mm |
