Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications14 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | QJ212 | |
| Bore diameter | d | 60 mm |
| Outside diameter | D | 110 mm |
| Width | B | 22 mm |
| Basic dynamic load rating | C | 94 kN |
| Basic static load rating | C0 | 87 kN |
| Fatigue load limit | Pu | 6.1 kN |
| Reference speed | nref | 5400 r/min |
| Limiting speed | nG | 12300 r/min |
| Mass | ≈m | 0.945 kg |
| Precision class | PN — Normal (ISO 492:2023) | |
| Cage | MPA — Solid brass cage, outer ring guided | |
| Minimum operating temperature | Tmin | -30 °C |
| Maximum operating temperature | Tmax | 150 °C |
Product characteristics5 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Design, bearing outer ring | N | Ring groove for snap ring |
| Tolerance class | PN | Normal (ISO 492:2023) |
| Cage | MPA | Solid brass cage, outer ring guided |
| Dimensional / heat stabilization | S0 | Rings dimensional stabilized up to 150° |
| Axial internal clearance | CN | Group N (CN) |
Main Dimensions & Performance Data9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 60 mm2.362 in |
| Outside diameter | D | 110 mm4.331 in |
| Width | B | 22 mm0.866 in |
| Basic dynamic load rating, radial | Cr | 94,000 N21,133.094 lbf |
| Basic static load rating, radial | C0r | 87,000 N19,559.353 lbf |
| Fatigue load limit, radial | Cur | 6,100 N1,371.403 lbf |
| Limiting speed | nG | 12,300 1/min |
| Reference speed | nϑr | 5,400 1/min |
| Mass | ≈m | 0.945 kg2.083 lbs |
Mounting dimensions3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 69 mm2.717 in |
| Maximum diameter of housing shoulder | Da max | 101 mm3.976 in |
| Maximum fillet radius | ra max | 1.5 mm0.059 in |
Dimensions5 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum chamfer dimension | rmin | 1.5 mm0.059 in |
| Shoulder diameter outer ring | D1 | 92.95 mm3.659 in |
| Shoulder diameter inner ring | d1 | 77.05 mm3.033 in |
| Distance between the apexes of the pressure cones | a | 59.5 mm2.343 in |
| Contact angle | α | 35 ° |
Temperature range2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Operating temperature min. | Tmin | -30 °C-22 °F |
| Operating temperature max. | Tmax | 150 °C302 °F |
Capabilities & suitability6 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial load capacity | Yes | |
| Axial load capacity in one direction | Yes | |
| Axial load capacity in both directions | Yes | |
| Suitable for grease lubrication | Yes | |
| Suitable for oil lubrication | Yes | |
| Unsealed design | Yes |
Manufacturer Identity10 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 366698 | |
| Brand | FAG | |
| Base Type | QJ212 | |
| Old Designation | ["QJ212-N-MPA"] | |
| X Life Marking | XL | |
| SAP material number | 0192606280000 | |
| Base product | 230508AD41 | |
| Bearing X designation | QJ212-XL-N-MPA | |
| Mounting Manager ID | QJ212-XL-N-MPA | |
| Grease application ID | QJ212-XL-N-MPA |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Four point contact bearing QJ2..-XL-N-MPA, X-life, ring groove, solid brass cage | |
| Short Description | Four-point contact bearing |
Technical Data18 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter (D) | 60 mm | |
| Outside Diameter (D) | 110 mm | |
| Width (B) | 22 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 94,000 N | |
| Basic Static Load Rating, Radial (C0R) | 87,000 N | |
| Operating Temperature Min. (Tmin) | -30 °C | |
| Limiting Speed (Ng) | 12,300 1/min | |
| Operating Temperature Max. (Tmax) | 150 °C | |
| Reference Speed (Nϑr) | 5,400 1/min | |
| Fatigue Load Limit, Radial (Cur) | 6,100 N | |
| Minimum Diameter Shaft Shoulder (Da Min) | 69 mm | |
| Shoulder Diameter Inner Ring (D1) | 77.05 mm | |
| Maximum Diameter Of Housing Shoulder (Da Max) | 101 mm | |
| Minimum Chamfer Dimension (Rmin) | 1.5 mm | |
| Maximum Fillet Radius (Ra Max) | 1.5 mm | |
| Shoulder Diameter Outer Ring (D1) | 92.95 mm | |
| Contact Angle (Α) | 35 ° | |
| Distance Between The Apexes Of The Pressure Cones (A) | 59.5 mm |