Product specifications

Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.

Core specifications14 parameters

Core specifications
Parameter	Symbol	Value
Series		QJ1972
Bore diameter	d	360 mm
Outside diameter	D	480 mm
Width	B	56 mm
Basic dynamic load rating	C	495 kN
Basic static load rating	C0	1030 kN
Fatigue load limit	Pu	28 kN
Reference speed	nref	990 r/min
Limiting speed	nG	2220 r/min
Mass	≈m	30.2 kg
Precision class		PN — Normal (ISO 492:2023)
Cage		MPA — Solid brass cage, outer ring guided
Minimum operating temperature	Tmin	-30 °C
Maximum operating temperature	Tmax	200 °C

Product characteristics5 parameters

Product characteristics
Parameter	Symbol	Value
Design, bearing outer ring	N2	Two retaining grooves in the outer ring on one side
Tolerance class	PN	Normal (ISO 492:2023)
Cage	MPA	Solid brass cage, outer ring guided
Dimensional / heat stabilization	S1	Rings dimensional stabilized up to 200°
Axial internal clearance	CN	Group N (CN)

Main Dimensions & Performance Data9 parameters

Main Dimensions & Performance Data
Parameter	Symbol	Value
Bore diameter	d	360 mm14.173 in
Outside diameter	D	480 mm18.898 in
Width	B	56 mm2.205 in
Basic dynamic load rating, radial	Cr	495,000 N111,285.971 lbf
Basic static load rating, radial	C0r	1,030,000 N231,564.748 lbf
Fatigue load limit, radial	Cur	28,000 N6,294.964 lbf
Limiting speed	nG	2,220 1/min
Reference speed	nϑr	990 1/min
Mass	≈m	30.2 kg66.58 lbs

Mounting dimensions3 parameters

Mounting dimensions
Parameter	Symbol	Value
Minimum diameter shaft shoulder	da min	372.4 mm14.661 in
Maximum diameter of housing shoulder	Da max	467.6 mm18.409 in
Maximum fillet radius	ra max	2.5 mm0.098 in

Dimensions9 parameters

Dimensions
Parameter	Symbol	Value
Minimum chamfer dimension	rmin	3 mm0.118 in
Shoulder diameter outer ring	D1	438.8 mm17.276 in
Shoulder diameter inner ring	d1	403.3 mm15.878 in
Distance between the apexes of the pressure cones	a	294.1 mm11.579 in
Hight retaining slot	an	15 mm0.591 in
Width retaining slot	bn	12.5 mm0.492 in
Radius retaining slot	rn	2.5 mm0.098 in
Angle retaining slot		45 °
Contact angle	α	35 °

Temperature range2 parameters

Temperature range
Parameter	Symbol	Value
Operating temperature min.	Tmin	-30 °C-22 °F
Operating temperature max.	Tmax	200 °C392 °F

Capabilities & suitability7 parameters

Capabilities & suitability
Parameter	Symbol	Value
Radial load capacity		Yes
Axial load capacity in one direction		Yes
Axial load capacity in both directions		Yes
Suitable for grease lubrication		Yes
Suitable for oil lubrication		Yes
Unsealed design		Yes
Largebearing		Yes

Manufacturer Identity8 parameters

Product Identity2 parameters

Product Identity
Parameter	Symbol	Value
Construction		Four point contact bearing QJ19..-N2-MPA, holding grooves, solid brass cage
Short Description		Four-point contact bearing

Technical Data22 parameters

Technical Data
Parameter	Symbol	Value
Bore Diameter (D)		360 mm
Outside Diameter (D)		480 mm
Width (B)		56 mm
Basic Dynamic Load Rating, Radial (Cr)		495,000 N
Basic Static Load Rating, Radial (C0R)		1,030,000 N
Operating Temperature Min. (Tmin)		-30 °C
Limiting Speed (Ng)		2,220 1/min
Operating Temperature Max. (Tmax)		200 °C
Reference Speed (Nϑr)		990 1/min
Angle Retaining Slot (Angle Retain)		45 °
Hight Retaining Slot (An)		15 mm
Radius Retaining Slot (Rn)		2.5 mm
Fatigue Load Limit, Radial (Cur)		28,000 N
Minimum Diameter Shaft Shoulder (Da Min)		372.4 mm
Shoulder Diameter Inner Ring (D1)		403.3 mm
Maximum Diameter Of Housing Shoulder (Da Max)		467.6 mm
Minimum Chamfer Dimension (Rmin)		3 mm
Maximum Fillet Radius (Ra Max)		2.5 mm
Shoulder Diameter Outer Ring (D1)		438.8 mm
Contact Angle (Α)		35 °
Distance Between The Apexes Of The Pressure Cones (A)		294.1 mm
Width Retaining Slot (Bn)		12.5 mm

FAG QJ1972-N2-MPA