Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications13 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | HCB71936 | |
| Bore diameter | d | 180 mm |
| Outside diameter | D | 250 mm |
| Width | B | 33 mm |
| Basic dynamic load rating | C | 171 kN |
| Basic static load rating | C0 | 139 kN |
| Fatigue load limit | Pu | 7.7 kN |
| Mass | ≈m | 3.393 kg |
| Precision class | P4S — Tolerance class P4S, FAG standard better than P4 to ISO 492:2023 | |
| Sealing | Without — Not sealed | |
| Cage | T — Laminated fabric cage | |
| Minimum operating temperature | Tmin | -30 °C |
| Maximum operating temperature | Tmax | 100 °C |
Product characteristics6 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Contact angle | C | Contact angle 15° |
| Type of Seal | Without | Not sealed |
| Cage | T | Laminated fabric cage |
| Tolerance class | P4S | Tolerance class P4S, FAG standard better than P4 to ISO 492:2023 |
| Arrangement bearing set | U | Single bearing |
| Preload class | L | Preload light |
Main Dimensions & Performance Data9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 180 mm7.087 in |
| Outside diameter | D | 250 mm9.843 in |
| Width | B | 33 mm1.299 in |
| Basic dynamic load rating, radial | Cr | 171,000 N38,444.245 lbf |
| Basic static load rating, radial | C0r | 139,000 N31,250 lbf |
| Fatigue load limit, radial | Cur | 7,700 N1,731.115 lbf |
| Limiting speed for grease lubrication | nG Grease | 7,000 1/min |
| Limiting speed for oil lubrication | nG Oil | 11,000 1/min |
| Mass | ≈m | 3.393 kg7.48 lbs |
Mounting dimensions11 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Diameter shaft shoulder | da | 192 mm7.559 in |
| Diameter shaft shoulder clearance | da | h12 |
| Shoulder diameter outer ring | Da | 238 mm9.37 in |
| Shoulder diameter outer ring clearance | Da | H12 |
| Maximum recess radius | ra max | 1 mm0.039 in |
| Maximum recess radius | ra1 max | 1 mm0.039 in |
| Minimum diameter injection pitch | Etk min | 201.6 mm7.937 in |
| Maximum diameter injection pitch | Etk max | 209 mm8.228 in |
| Minimum diameter injection pitch | Etk1 min | 201.6 mm7.937 in |
| Maximum diameter injection pitch | Etk1 max | 209 mm8.228 in |
| Distance between the apexes of the pressure cones | a | 45.3 mm1.783 in |
Dimensions3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum chamfer dimension | rmin | 2 mm0.079 in |
| Minimum chamfer dimension | r1 min | 1 mm0.039 in |
| Contact angle | α | 15 ° |
Temperature range2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Operating temperature min. | Tmin | -30 °C-22 °F |
| Operating temperature max. | Tmax | 100 °C212 °F |
Capabilities & suitability5 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial load capacity | Yes | |
| Axial load capacity in one direction | Yes | |
| Suitable for grease lubrication | Yes | |
| Suitable for oil lubrication | Yes | |
| Unsealed design | Yes |
Manufacturer Identity8 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 363738 | |
| Brand | FAG | |
| Base Type | HCB71936 | |
| X Life Marking | n.r. | |
| SAP material number | 0594778220000 | |
| Base product | 2305080312 | |
| Bearing X designation | HCB71936-C-T-P4S | |
| Mounting Manager ID | HCB71936-C-T-P4S |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Spindle bearing HCB719..-C, adjusted, in pairs or sets, contact angle α = 15°, with ceramic balls, restricted tolerances | |
| Short Description | Spindle bearing |
Additional information9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Preload force light | FV L | 519 N116.682 lbf |
| Preload force medium | FV M | 1,726 N388.04 lbf |
| Preload force heavy | FV H | 3,546 N797.212 lbf |
| Lift-off force light | KaE L | 1,540 N346.223 lbf |
| Lift-off force medium | KaE M | 5,380 N1,209.532 lbf |
| Lift-off force heavy | KaE H | 11,597 N2,607.239 lbf |
| Axial rigidity light | ca L | 148 N/µm |
| Axial rigidity medium | ca M | 240 N/µm |
| Axial rigidity heavy | ca H | 332 N/µm |
Technical Data31 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter (D) | 180 mm | |
| Outside Diameter (D) | 250 mm | |
| Width (B) | 33 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 171,000 N | |
| Basic Static Load Rating, Radial (C0R) | 139,000 N | |
| Operating Temperature Min. (Tmin) | -30 °C | |
| Operating Temperature Max. (Tmax) | 100 °C | |
| Axial Rigidity Heavy (Ca H) | 332 N/µm | |
| Axial Rigidity Light (Ca L) | 148 N/µm | |
| Axial Rigidity Medium (Ca M) | 240 N/µm | |
| Diameter Shaft Shoulder (Da) | 192 mm | |
| Lift Off Force Heavy (Kae H) | 11,597 N | |
| Lift Off Force Light (Kae L) | 1,540 N | |
| Lift Off Force Medium (Kae M) | 5,380 N | |
| Limiting Speed For Oil Lubrication (Ng Oil) | 11,000 1/min | |
| Maximum Diameter Injection Pitch (Etk1 Ma) | 209 mm | |
| Maximum Diameter Injection Pitch (Etk Max) | 209 mm | |
| Minimum Diameter Injection Pitch (Etk1 Mi) | 201.6 mm | |
| Preload Force Heavy (Fv H) | 3,546 N | |
| Preload Force Light (Fv L) | 519 N | |
| Preload Force Medium (Fv M) | 1,726 N | |
| Shoulder Diameter Outer Ring (Da) | 238 mm | |
| Limiting Speed For Grease Lubrication (Ng Grea) | 7,000 1/min | |
| Minimum Diameter Injection Pitch (Etk Min) | 201.6 mm | |
| Fatigue Load Limit, Radial (Cur) | 7,700 N | |
| Minimum Chamfer Dimension (Rmin) | 2 mm | |
| Maximum Fillet Radius (Ra Max) | 1 mm | |
| Maximum Recess Radius (Ra1 Max) | 1 mm | |
| Minimum Chamfer Dimension (R1 Min) | 1 mm | |
| Contact Angle (Α) | 15 ° | |
| Distance Between The Apexes Of The Pressure Cones (A) | 45.3 mm |
