Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications13 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | HCB7010 | |
| Bore diameter | d | 50 mm |
| Outside diameter | D | 80 mm |
| Width | B | 16 mm |
| Basic dynamic load rating | C | 29 kN |
| Basic static load rating | C0 | 15.4 kN |
| Fatigue load limit | Pu | 1.24 kN |
| Mass | ≈m | 0.21441 kg |
| Precision class | P4S — Tolerance class P4S, FAG standard better than P4 to ISO 492:2023 | |
| Sealing | Without — Not sealed | |
| Cage | T — Laminated fabric cage | |
| Minimum operating temperature | Tmin | -30 °C |
| Maximum operating temperature | Tmax | 100 °C |
Product characteristics6 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Contact angle | C | Contact angle 15° |
| Type of Seal | Without | Not sealed |
| Cage | T | Laminated fabric cage |
| Tolerance class | P4S | Tolerance class P4S, FAG standard better than P4 to ISO 492:2023 |
| Arrangement bearing set | U | Single bearing |
| Preload class | L | Preload light |
Main Dimensions & Performance Data9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 50 mm1.969 in |
| Outside diameter | D | 80 mm3.15 in |
| Width | B | 16 mm0.63 in |
| Basic dynamic load rating, radial | Cr | 29,000 N6,519.784 lbf |
| Basic static load rating, radial | C0r | 15,400 N3,462.23 lbf |
| Fatigue load limit, radial | Cur | 1,240 N278.777 lbf |
| Limiting speed for grease lubrication | nG Grease | 24,000 1/min |
| Limiting speed for oil lubrication | nG Oil | 38,000 1/min |
| Mass | ≈m | 214.41 g7.563 oz |
Mounting dimensions11 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Diameter shaft shoulder | da | 56 mm2.205 in |
| Diameter shaft shoulder clearance | da | h12 |
| Shoulder diameter outer ring | Da | 74 mm2.913 in |
| Shoulder diameter outer ring clearance | Da | H12 |
| Maximum recess radius | ra max | 1 mm0.039 in |
| Maximum recess radius | ra1 max | 0.3 mm0.012 in |
| Minimum diameter injection pitch | Etk min | 59.3 mm2.335 in |
| Maximum diameter injection pitch | Etk max | 62.3 mm2.453 in |
| Minimum diameter injection pitch | Etk1 min | 59.3 mm2.335 in |
| Maximum diameter injection pitch | Etk1 max | 62.3 mm2.453 in |
| Distance between the apexes of the pressure cones | a | 16.7 mm0.657 in |
Dimensions3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum chamfer dimension | rmin | 1 mm0.039 in |
| Minimum chamfer dimension | r1 min | 1 mm0.039 in |
| Contact angle | α | 15 ° |
Temperature range2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Operating temperature min. | Tmin | -30 °C-22 °F |
| Operating temperature max. | Tmax | 100 °C212 °F |
Capabilities & suitability5 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial load capacity | Yes | |
| Axial load capacity in one direction | Yes | |
| Suitable for grease lubrication | Yes | |
| Suitable for oil lubrication | Yes | |
| Unsealed design | Yes |
Manufacturer Identity8 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 363520 | |
| Brand | FAG | |
| Base Type | HCB7010 | |
| X Life Marking | n.r. | |
| SAP material number | 0385389030000 | |
| Base product | 2305080312 | |
| Bearing X designation | HCB7010-C-T-P4S | |
| Mounting Manager ID | HCB7010-C-T-P4S |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Spindle bearing HCB70..-C, adjusted, in pairs or sets, contact angle α = 15°, with ceramic balls, restricted tolerances | |
| Short Description | Spindle bearing |
Additional information9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Preload force light | FV L | 73 N16.412 lbf |
| Preload force medium | FV M | 268 N60.252 lbf |
| Preload force heavy | FV H | 566 N127.248 lbf |
| Lift-off force light | KaE L | 217 N48.786 lbf |
| Lift-off force medium | KaE M | 848 N190.647 lbf |
| Lift-off force heavy | KaE H | 1,894 N425.809 lbf |
| Axial rigidity light | ca L | 44 N/µm |
| Axial rigidity medium | ca M | 75 N/µm |
| Axial rigidity heavy | ca H | 107 N/µm |
Technical Data31 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter (D) | 50 mm | |
| Outside Diameter (D) | 80 mm | |
| Width (B) | 16 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 29,000 N | |
| Basic Static Load Rating, Radial (C0R) | 15,400 N | |
| Operating Temperature Min. (Tmin) | -30 °C | |
| Operating Temperature Max. (Tmax) | 100 °C | |
| Axial Rigidity Heavy (Ca H) | 107 N/µm | |
| Axial Rigidity Light (Ca L) | 44 N/µm | |
| Axial Rigidity Medium (Ca M) | 75 N/µm | |
| Diameter Shaft Shoulder (Da) | 56 mm | |
| Lift Off Force Heavy (Kae H) | 1,894 N | |
| Lift Off Force Light (Kae L) | 217 N | |
| Lift Off Force Medium (Kae M) | 848 N | |
| Limiting Speed For Oil Lubrication (Ng Oil) | 38,000 1/min | |
| Maximum Diameter Injection Pitch (Etk1 Ma) | 62.3 mm | |
| Maximum Diameter Injection Pitch (Etk Max) | 62.3 mm | |
| Minimum Diameter Injection Pitch (Etk1 Mi) | 59.3 mm | |
| Preload Force Heavy (Fv H) | 566 N | |
| Preload Force Light (Fv L) | 73 N | |
| Preload Force Medium (Fv M) | 268 N | |
| Shoulder Diameter Outer Ring (Da) | 74 mm | |
| Limiting Speed For Grease Lubrication (Ng Grea) | 24,000 1/min | |
| Minimum Diameter Injection Pitch (Etk Min) | 59.3 mm | |
| Fatigue Load Limit, Radial (Cur) | 1,240 N | |
| Minimum Chamfer Dimension (Rmin) | 1 mm | |
| Maximum Fillet Radius (Ra Max) | 1 mm | |
| Maximum Recess Radius (Ra1 Max) | 0.3 mm | |
| Minimum Chamfer Dimension (R1 Min) | 1 mm | |
| Contact Angle (Α) | 15 ° | |
| Distance Between The Apexes Of The Pressure Cones (A) | 16.7 mm |
