Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications13 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | HCB7006 | |
| Bore diameter | d | 30 mm |
| Outside diameter | D | 55 mm |
| Width | B | 13 mm |
| Basic dynamic load rating | C | 13.7 kN |
| Basic static load rating | C0 | 6.1 kN |
| Fatigue load limit | Pu | 0.49 kN |
| Mass | ≈m | 0.1011 kg |
| Precision class | P4S — Tolerance class P4S, FAG standard better than P4 to ISO 492:2023 | |
| Sealing | Without — Not sealed | |
| Cage | T — Laminated fabric cage | |
| Minimum operating temperature | Tmin | -30 °C |
| Maximum operating temperature | Tmax | 100 °C |
Product characteristics6 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Contact angle | E | Contact angle 25° |
| Type of Seal | Without | Not sealed |
| Cage | T | Laminated fabric cage |
| Tolerance class | P4S | Tolerance class P4S, FAG standard better than P4 to ISO 492:2023 |
| Arrangement bearing set | U | Single bearing |
| Preload class | L | Preload light |
Main Dimensions & Performance Data9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 30 mm1.181 in |
| Outside diameter | D | 55 mm2.165 in |
| Width | B | 13 mm0.512 in |
| Basic dynamic load rating, radial | Cr | 13,700 N3,080.036 lbf |
| Basic static load rating, radial | C0r | 6,100 N1,371.403 lbf |
| Fatigue load limit, radial | Cur | 490 N110.162 lbf |
| Limiting speed for grease lubrication | nG Grease | 34,000 1/min |
| Limiting speed for oil lubrication | nG Oil | 53,000 1/min |
| Mass | ≈m | 101.1 g3.566 oz |
Mounting dimensions11 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Diameter shaft shoulder | da | 36 mm1.417 in |
| Diameter shaft shoulder clearance | da | h12 |
| Shoulder diameter outer ring | Da | 49 mm1.929 in |
| Shoulder diameter outer ring clearance | Da | H12 |
| Maximum recess radius | ra max | 1 mm0.039 in |
| Maximum recess radius | ra1 max | 0.3 mm0.012 in |
| Minimum diameter injection pitch | Etk min | 39.4 mm1.551 in |
| Maximum diameter injection pitch | Etk max | 40.6 mm1.598 in |
| Minimum diameter injection pitch | Etk1 min | 39.4 mm1.551 in |
| Maximum diameter injection pitch | Etk1 max | 40.6 mm1.598 in |
| Distance between the apexes of the pressure cones | a | 16.5 mm0.65 in |
Dimensions3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum chamfer dimension | rmin | 1 mm0.039 in |
| Minimum chamfer dimension | r1 min | 1 mm0.039 in |
| Contact angle | α | 25 ° |
Temperature range2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Operating temperature min. | Tmin | -30 °C-22 °F |
| Operating temperature max. | Tmax | 100 °C212 °F |
Capabilities & suitability5 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial load capacity | Yes | |
| Axial load capacity in one direction | Yes | |
| Suitable for grease lubrication | Yes | |
| Suitable for oil lubrication | Yes | |
| Unsealed design | Yes |
Manufacturer Identity5 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 363501 | |
| Brand | FAG | |
| Base Type | HCB7006 | |
| SAP material number | 0385474300000 | |
| Base product | 2305080312 |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Spindle bearing HCB70..-E, adjusted, in pairs or sets, contact angle α = 25°, with ceramic balls, restricted tolerances | |
| Short Description | Spindle bearing |
Additional information9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Preload force light | FV L | 42 N9.442 lbf |
| Preload force medium | FV M | 203 N45.638 lbf |
| Preload force heavy | FV H | 465 N104.541 lbf |
| Lift-off force light | KaE L | 117 N26.304 lbf |
| Lift-off force medium | KaE M | 592 N133.094 lbf |
| Lift-off force heavy | KaE H | 1,395 N313.624 lbf |
| Axial rigidity light | ca L | 60 N/µm |
| Axial rigidity medium | ca M | 107 N/µm |
| Axial rigidity heavy | ca H | 147 N/µm |
Technical Data31 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter (D) | 30 mm | |
| Outside Diameter (D) | 55 mm | |
| Width (B) | 13 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 13,700 N | |
| Basic Static Load Rating, Radial (C0R) | 6,100 N | |
| Operating Temperature Min. (Tmin) | -30 °C | |
| Operating Temperature Max. (Tmax) | 100 °C | |
| Axial Rigidity Heavy (Ca H) | 147 N/µm | |
| Axial Rigidity Light (Ca L) | 60 N/µm | |
| Axial Rigidity Medium (Ca M) | 107 N/µm | |
| Diameter Shaft Shoulder (Da) | 36 mm | |
| Lift Off Force Heavy (Kae H) | 1,395 N | |
| Lift Off Force Light (Kae L) | 117 N | |
| Lift Off Force Medium (Kae M) | 592 N | |
| Limiting Speed For Oil Lubrication (Ng Oil) | 53,000 1/min | |
| Maximum Diameter Injection Pitch (Etk1 Ma) | 40.6 mm | |
| Maximum Diameter Injection Pitch (Etk Max) | 40.6 mm | |
| Minimum Diameter Injection Pitch (Etk1 Mi) | 39.4 mm | |
| Preload Force Heavy (Fv H) | 465 N | |
| Preload Force Light (Fv L) | 42 N | |
| Preload Force Medium (Fv M) | 203 N | |
| Shoulder Diameter Outer Ring (Da) | 49 mm | |
| Limiting Speed For Grease Lubrication (Ng Grea) | 34,000 1/min | |
| Minimum Diameter Injection Pitch (Etk Min) | 39.4 mm | |
| Fatigue Load Limit, Radial (Cur) | 490 N | |
| Minimum Chamfer Dimension (Rmin) | 1 mm | |
| Maximum Fillet Radius (Ra Max) | 1 mm | |
| Maximum Recess Radius (Ra1 Max) | 0.3 mm | |
| Minimum Chamfer Dimension (R1 Min) | 1 mm | |
| Contact Angle (Α) | 25 ° | |
| Distance Between The Apexes Of The Pressure Cones (A) | 16.5 mm |
