Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications13 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | B7238 | |
| Bore diameter | d | 190 mm |
| Outside diameter | D | 340 mm |
| Width | B | 55 mm |
| Basic dynamic load rating | C | 305 kN |
| Basic static load rating | C0 | 275 kN |
| Fatigue load limit | Pu | 17.9 kN |
| Mass | ≈m | 20 kg |
| Precision class | P4S — Tolerance class P4S, FAG standard better than P4 to ISO 492:2023 | |
| Sealing | Without | |
| Cage | T — Laminated fabric cage | |
| Minimum operating temperature | Tmin | -30 °C |
| Maximum operating temperature | Tmax | 100 °C |
Product characteristics7 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Preload class | L | Preload light |
| Contact angle | E | Contact angle 25° |
| Tolerance class | P4S | Tolerance class P4S, FAG standard better than P4 to ISO 492:2023 |
| Type of Seal | Without | |
| Shape of outer surface | Standard | |
| Cage | T | Laminated fabric cage |
| Arrangement bearing set | U | Single bearing |
Main Dimensions & Performance Data9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 190 mm7.48 in |
| Outside diameter | D | 340 mm13.386 in |
| Width | B | 55 mm2.165 in |
| Basic dynamic load rating, radial | Cr | 305,000 N68,570.144 lbf |
| Basic static load rating, radial | C0r | 275,000 N61,825.54 lbf |
| Fatigue load limit, radial | Cur | 17,900 N4,024.281 lbf |
| Limiting speed for grease lubrication | nG Grease | 3,200 1/min |
| Limiting speed for oil lubrication | nG Oil | 4,800 1/min |
| Mass | ≈m | 20 kg44.092 lbs |
Mounting dimensions11 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Diameter shaft shoulder | da | 223.5 mm8.799 in |
| Diameter shaft shoulder clearance | da | h12 |
| Shoulder diameter outer ring | Da | 306.5 mm12.067 in |
| Shoulder diameter outer ring clearance | Da | H12 |
| Maximum recess radius | ra max | 3 mm0.118 in |
| Maximum recess radius | ra1 max | 3 mm0.118 in |
| Minimum diameter injection pitch | Etk min | 242.1 mm9.531 in |
| Maximum diameter injection pitch | Etk max | 255.3 mm10.051 in |
| Minimum diameter injection pitch | Etk1 min | 242.1 mm9.531 in |
| Maximum diameter injection pitch | Etk1 max | 255.3 mm10.051 in |
| Distance between the apexes of the pressure cones | a | 89.3 mm3.516 in |
Dimensions3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum chamfer dimension | rmin | 4 mm0.157 in |
| Minimum chamfer dimension | r1 min | 4 mm0.157 in |
| Contact angle | α | 25 ° |
Temperature range2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Operating temperature min. | Tmin | -30 °C-22 °F |
| Operating temperature max. | Tmax | 100 °C212 °F |
Capabilities & suitability6 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial load capacity | Yes | |
| Axial load capacity in one direction | Yes | |
| Suitable for grease lubrication | Yes | |
| Suitable for oil lubrication | Yes | |
| Unsealed design | Yes | |
| Largebearing | Yes |
Manufacturer Identity7 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 1741041 | |
| Brand | FAG | |
| Base Type | B7238 | |
| X Life Marking | n.r. | |
| Base product | 2305080311 | |
| Bearing X designation | B7238-E-T-P4S | |
| Mounting Manager ID | B7238-E-T-P4S |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Spindle bearing B72..-E, adjusted, in pairs or sets, contact angle α = 25°, restricted tolerances | |
| Short Description | Spindle bearing |
Additional information9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Preload force light | FV L | 2,797 N628.822 lbf |
| Preload force medium | FV M | 9,366 N2,105.665 lbf |
| Preload force heavy | FV H | 19,397 N4,360.836 lbf |
| Lift-off force light | KaE L | 8,105 N1,822.167 lbf |
| Lift-off force medium | KaE M | 27,894 N6,271.133 lbf |
| Lift-off force heavy | KaE H | 59,391 N13,352.293 lbf |
| Axial rigidity light | ca L | 482 N/µm |
| Axial rigidity medium | ca M | 755 N/µm |
| Axial rigidity heavy | ca H | 1,010 N/µm |
Technical Data31 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter (D) | 190 mm | |
| Outside Diameter (D) | 340 mm | |
| Width (B) | 55 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 305,000 N | |
| Basic Static Load Rating, Radial (C0R) | 275,000 N | |
| Operating Temperature Min. (Tmin) | -30 °C | |
| Operating Temperature Max. (Tmax) | 100 °C | |
| Axial Rigidity Heavy (Ca H) | 1,010 N/µm | |
| Axial Rigidity Light (Ca L) | 482 N/µm | |
| Axial Rigidity Medium (Ca M) | 755 N/µm | |
| Diameter Shaft Shoulder (Da) | 223.5 mm | |
| Lift Off Force Heavy (Kae H) | 59,391 N | |
| Lift Off Force Light (Kae L) | 8,105 N | |
| Lift Off Force Medium (Kae M) | 27,894 N | |
| Limiting Speed For Oil Lubrication (Ng Oil) | 4,800 1/min | |
| Maximum Diameter Injection Pitch (Etk1 Ma) | 255.3 mm | |
| Maximum Diameter Injection Pitch (Etk Max) | 255.3 mm | |
| Minimum Diameter Injection Pitch (Etk1 Mi) | 242.1 mm | |
| Preload Force Heavy (Fv H) | 19,397 N | |
| Preload Force Light (Fv L) | 2,797 N | |
| Preload Force Medium (Fv M) | 9,366 N | |
| Shoulder Diameter Outer Ring (Da) | 306.5 mm | |
| Limiting Speed For Grease Lubrication (Ng Grea) | 3,200 1/min | |
| Minimum Diameter Injection Pitch (Etk Min) | 242.1 mm | |
| Fatigue Load Limit, Radial (Cur) | 17,900 N | |
| Minimum Chamfer Dimension (Rmin) | 4 mm | |
| Maximum Fillet Radius (Ra Max) | 3 mm | |
| Maximum Recess Radius (Ra1 Max) | 3 mm | |
| Minimum Chamfer Dimension (R1 Min) | 4 mm | |
| Contact Angle (Α) | 25 ° | |
| Distance Between The Apexes Of The Pressure Cones (A) | 89.3 mm |