Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications13 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | B7215 | |
| Bore diameter | d | 75 mm |
| Outside diameter | D | 130 mm |
| Width | B | 25 mm |
| Basic dynamic load rating | C | 70 kN |
| Basic static load rating | C0 | 42.5 kN |
| Fatigue load limit | Pu | 4.45 kN |
| Mass | ≈m | 1.183 kg |
| Precision class | P4S — Tolerance class P4S, FAG standard better than P4 to ISO 492:2023 | |
| Sealing | Without — Not sealed | |
| Cage | T — Laminated fabric cage | |
| Minimum operating temperature | Tmin | -30 °C |
| Maximum operating temperature | Tmax | 100 °C |
Product characteristics6 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Preload class | L | Preload light |
| Contact angle | E | Contact angle 25° |
| Tolerance class | P4S | Tolerance class P4S, FAG standard better than P4 to ISO 492:2023 |
| Type of Seal | Without | Not sealed |
| Cage | T | Laminated fabric cage |
| Arrangement bearing set | U | Single bearing |
Main Dimensions & Performance Data9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 75 mm2.953 in |
| Outside diameter | D | 130 mm5.118 in |
| Width | B | 25 mm0.984 in |
| Basic dynamic load rating, radial | Cr | 70,000 N15,737.41 lbf |
| Basic static load rating, radial | C0r | 42,500 N9,554.856 lbf |
| Fatigue load limit, radial | Cur | 4,450 N1,000.45 lbf |
| Limiting speed for grease lubrication | nG Grease | 9,500 1/min |
| Limiting speed for oil lubrication | nG Oil | 16,000 1/min |
| Mass | ≈m | 1.183 kg2.608 lbs |
Mounting dimensions11 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Diameter shaft shoulder | da | 85 mm3.346 in |
| Diameter shaft shoulder clearance | da | h12 |
| Shoulder diameter outer ring | Da | 120 mm4.724 in |
| Shoulder diameter outer ring clearance | Da | H12 |
| Maximum recess radius | ra max | 1.5 mm0.059 in |
| Maximum recess radius | ra1 max | 0.6 mm0.024 in |
| Minimum diameter injection pitch | Etk min | 93 mm3.661 in |
| Maximum diameter injection pitch | Etk max | 98.5 mm3.878 in |
| Minimum diameter injection pitch | Etk1 min | 93 mm3.661 in |
| Maximum diameter injection pitch | Etk1 max | 98.5 mm3.878 in |
| Distance between the apexes of the pressure cones | a | 36.4 mm1.433 in |
Dimensions3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum chamfer dimension | rmin | 1.5 mm0.059 in |
| Minimum chamfer dimension | r1 min | 1.5 mm0.059 in |
| Contact angle | α | 25 ° |
Temperature range2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Operating temperature min. | Tmin | -30 °C-22 °F |
| Operating temperature max. | Tmax | 100 °C212 °F |
Capabilities & suitability5 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial load capacity | Yes | |
| Axial load capacity in one direction | Yes | |
| Suitable for grease lubrication | Yes | |
| Suitable for oil lubrication | Yes | |
| Unsealed design | Yes |
Manufacturer Identity8 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 362202 | |
| Brand | FAG | |
| Base Type | B7215 | |
| Old Designation | ["B7215E.TPA.P4.UL","B7215E.T.P4S.UL"] | |
| SAP material number | 0167276810000 | |
| Base product | 2305080311 | |
| Bearing X designation | B7215-E-T-P4S | |
| Mounting Manager ID | B7215-E-T-P4S |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Spindle bearing B72..-E, adjusted, in pairs or sets, contact angle α = 25°, restricted tolerances | |
| Short Description | Spindle bearing |
Additional information9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Preload force light | FV L | 615 N138.264 lbf |
| Preload force medium | FV M | 2,091 N470.099 lbf |
| Preload force heavy | FV H | 4,345 N976.844 lbf |
| Lift-off force light | KaE L | 1,794 N403.327 lbf |
| Lift-off force medium | KaE M | 6,306 N1,417.716 lbf |
| Lift-off force heavy | KaE H | 13,546 N3,045.414 lbf |
| Axial rigidity light | ca L | 204 N/µm |
| Axial rigidity medium | ca M | 325 N/µm |
| Axial rigidity heavy | ca H | 439 N/µm |
Technical Data31 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter (D) | 75 mm | |
| Outside Diameter (D) | 130 mm | |
| Width (B) | 25 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 70,000 N | |
| Basic Static Load Rating, Radial (C0R) | 42,500 N | |
| Operating Temperature Min. (Tmin) | -30 °C | |
| Operating Temperature Max. (Tmax) | 100 °C | |
| Axial Rigidity Heavy (Ca H) | 439 N/µm | |
| Axial Rigidity Light (Ca L) | 204 N/µm | |
| Axial Rigidity Medium (Ca M) | 325 N/µm | |
| Diameter Shaft Shoulder (Da) | 85 mm | |
| Lift Off Force Heavy (Kae H) | 13,546 N | |
| Lift Off Force Light (Kae L) | 1,794 N | |
| Lift Off Force Medium (Kae M) | 6,306 N | |
| Limiting Speed For Oil Lubrication (Ng Oil) | 16,000 1/min | |
| Maximum Diameter Injection Pitch (Etk1 Ma) | 98.5 mm | |
| Maximum Diameter Injection Pitch (Etk Max) | 98.5 mm | |
| Minimum Diameter Injection Pitch (Etk1 Mi) | 93 mm | |
| Preload Force Heavy (Fv H) | 4,345 N | |
| Preload Force Light (Fv L) | 615 N | |
| Preload Force Medium (Fv M) | 2,091 N | |
| Shoulder Diameter Outer Ring (Da) | 120 mm | |
| Limiting Speed For Grease Lubrication (Ng Grea) | 9,500 1/min | |
| Minimum Diameter Injection Pitch (Etk Min) | 93 mm | |
| Fatigue Load Limit, Radial (Cur) | 4,450 N | |
| Minimum Chamfer Dimension (Rmin) | 1.5 mm | |
| Maximum Fillet Radius (Ra Max) | 1.5 mm | |
| Maximum Recess Radius (Ra1 Max) | 0.6 mm | |
| Minimum Chamfer Dimension (R1 Min) | 1.5 mm | |
| Contact Angle (Α) | 25 ° | |
| Distance Between The Apexes Of The Pressure Cones (A) | 36.4 mm |
