Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications13 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | B7213 | |
| Bore diameter | d | 65 mm |
| Outside diameter | D | 120 mm |
| Width | B | 23 mm |
| Basic dynamic load rating | C | 65 kN |
| Basic static load rating | C0 | 36.5 kN |
| Fatigue load limit | Pu | 3.85 kN |
| Mass | ≈m | 0.985 kg |
| Precision class | P4S — Tolerance class P4S, FAG standard better than P4 to ISO 492:2023 | |
| Cage | T — Laminated fabric cage | |
| Lubricant | GA21 — Grease for super precision bearings, standard | |
| Minimum operating temperature | Tmin | -30 °C |
| Maximum operating temperature | Tmax | 80 °C |
Product characteristics6 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Preload class | L | Preload light |
| Contact angle | E | Contact angle 25° |
| Tolerance class | P4S | Tolerance class P4S, FAG standard better than P4 to ISO 492:2023 |
| Cage | T | Laminated fabric cage |
| Arrangement bearing set | U | Single bearing |
| Lubricant | GA21 | Grease for super precision bearings, standard |
Main Dimensions & Performance Data8 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 65 mm2.559 in |
| Outside diameter | D | 120 mm4.724 in |
| Width | B | 23 mm0.906 in |
| Basic dynamic load rating, radial | Cr | 65,000 N14,613.309 lbf |
| Basic static load rating, radial | C0r | 36,500 N8,205.935 lbf |
| Fatigue load limit, radial | Cur | 3,850 N865.558 lbf |
| Limiting speed for grease lubrication | nG Grease | 11,000 1/min |
| Mass | ≈m | 0.985 kg2.172 lbs |
Mounting dimensions7 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Diameter shaft shoulder | da | 75.5 mm2.972 in |
| Diameter shaft shoulder clearance | da | h12 |
| Shoulder diameter outer ring | Da | 109.5 mm4.311 in |
| Shoulder diameter outer ring clearance | Da | H12 |
| Maximum recess radius | ra max | 1.5 mm0.059 in |
| Maximum recess radius | ra1 max | 0.6 mm0.024 in |
| Distance between the apexes of the pressure cones | a | 33.1 mm1.303 in |
Dimensions3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum chamfer dimension | rmin | 1.5 mm0.059 in |
| Minimum chamfer dimension | r1 min | 1.5 mm0.059 in |
| Contact angle | α | 25 ° |
Temperature range2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Operating temperature min. | Tmin | -30 °C-22 °F |
| Operating temperature max. | Tmax | 80 °C176 °F |
Capabilities & suitability5 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial load capacity | Yes | |
| Axial load capacity in one direction | Yes | |
| Lifetimelubricationfreedomfrommaintenance | Yes | |
| Suitable for grease lubrication | Yes | |
| Sealedonbothsides | Yes |
Manufacturer Identity8 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 362153 | |
| Brand | FAG | |
| Base Type | B7213 | |
| Old Designation | ["B7213E.2RSD.T.P4S.UL"] | |
| SAP material number | 0219383340000 | |
| Base product | 2305080311 | |
| Bearing X designation | B7213-E-2RSD-T-P4S | |
| Mounting Manager ID | B7213-E-2RSD-T-P4S |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Spindle bearing B72..-E-2RSD, adjusted, in pairs or sets, contact angle α = 25°, lip seals on both sides, non-contact, restricted tolerances | |
| Short Description | Spindle bearing |
Additional information9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Preload force light | FV L | 585 N131.52 lbf |
| Preload force medium | FV M | 1,977 N444.469 lbf |
| Preload force heavy | FV H | 4,100 N921.763 lbf |
| Lift-off force light | KaE L | 1,709 N384.218 lbf |
| Lift-off force medium | KaE M | 5,978 N1,343.975 lbf |
| Lift-off force heavy | KaE H | 12,828 N2,883.993 lbf |
| Axial rigidity light | ca L | 185 N/µm |
| Axial rigidity medium | ca M | 295 N/µm |
| Axial rigidity heavy | ca H | 399 N/µm |
Technical Data26 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter (D) | 65 mm | |
| Outside Diameter (D) | 120 mm | |
| Width (B) | 23 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 65,000 N | |
| Basic Static Load Rating, Radial (C0R) | 36,500 N | |
| Operating Temperature Min. (Tmin) | -30 °C | |
| Operating Temperature Max. (Tmax) | 80 °C | |
| Axial Rigidity Heavy (Ca H) | 399 N/µm | |
| Axial Rigidity Light (Ca L) | 185 N/µm | |
| Axial Rigidity Medium (Ca M) | 295 N/µm | |
| Diameter Shaft Shoulder (Da) | 75.5 mm | |
| Lift Off Force Heavy (Kae H) | 12,828 N | |
| Lift Off Force Light (Kae L) | 1,709 N | |
| Lift Off Force Medium (Kae M) | 5,978 N | |
| Preload Force Heavy (Fv H) | 4,100 N | |
| Preload Force Light (Fv L) | 585 N | |
| Preload Force Medium (Fv M) | 1,977 N | |
| Shoulder Diameter Outer Ring (Da) | 109.5 mm | |
| Limiting Speed For Grease Lubrication (Ng Grea) | 11,000 1/min | |
| Fatigue Load Limit, Radial (Cur) | 3,850 N | |
| Minimum Chamfer Dimension (Rmin) | 1.5 mm | |
| Maximum Fillet Radius (Ra Max) | 1.5 mm | |
| Maximum Recess Radius (Ra1 Max) | 0.6 mm | |
| Minimum Chamfer Dimension (R1 Min) | 1.5 mm | |
| Contact Angle (Α) | 25 ° | |
| Distance Between The Apexes Of The Pressure Cones (A) | 33.1 mm |
