Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications13 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | B7204 | |
| Bore diameter | d | 20 mm |
| Outside diameter | D | 47 mm |
| Width | B | 14 mm |
| Basic dynamic load rating | C | 17.2 kN |
| Basic static load rating | C0 | 8 kN |
| Fatigue load limit | Pu | 0.85 kN |
| Mass | ≈m | 0.112 kg |
| Precision class | P4S — Tolerance class P4S, FAG standard better than P4 to ISO 492:2023 | |
| Cage | T — Laminated fabric cage | |
| Lubricant | GA21 — Grease for super precision bearings, standard | |
| Minimum operating temperature | Tmin | -30 °C |
| Maximum operating temperature | Tmax | 80 °C |
Product characteristics6 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Preload class | L | Preload light |
| Contact angle | C | Contact angle 15° |
| Tolerance class | P4S | Tolerance class P4S, FAG standard better than P4 to ISO 492:2023 |
| Cage | T | Laminated fabric cage |
| Arrangement bearing set | U | Single bearing |
| Lubricant | GA21 | Grease for super precision bearings, standard |
Main Dimensions & Performance Data8 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 20 mm0.787 in |
| Outside diameter | D | 47 mm1.85 in |
| Width | B | 14 mm0.551 in |
| Basic dynamic load rating, radial | Cr | 17,200 N3,866.906 lbf |
| Basic static load rating, radial | C0r | 8,000 N1,798.561 lbf |
| Fatigue load limit, radial | Cur | 850 N191.097 lbf |
| Limiting speed for grease lubrication | nG Grease | 32,000 1/min |
| Mass | ≈m | 112 g3.951 oz |
Mounting dimensions7 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Diameter shaft shoulder | da | 26.5 mm1.043 in |
| Diameter shaft shoulder clearance | da | h12 |
| Shoulder diameter outer ring | Da | 40.5 mm1.594 in |
| Shoulder diameter outer ring clearance | Da | H12 |
| Maximum recess radius | ra max | 1 mm0.039 in |
| Maximum recess radius | ra1 max | 0.3 mm0.012 in |
| Distance between the apexes of the pressure cones | a | 11.5 mm0.453 in |
Dimensions3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum chamfer dimension | rmin | 1 mm0.039 in |
| Minimum chamfer dimension | r1 min | 1 mm0.039 in |
| Contact angle | α | 15 ° |
Temperature range2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Operating temperature min. | Tmin | -30 °C-22 °F |
| Operating temperature max. | Tmax | 80 °C176 °F |
Capabilities & suitability5 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial load capacity | Yes | |
| Axial load capacity in one direction | Yes | |
| Lifetimelubricationfreedomfrommaintenance | Yes | |
| Suitable for grease lubrication | Yes | |
| Sealedonbothsides | Yes |
Manufacturer Identity9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 362045 | |
| Brand | FAG | |
| Base Type | B7204 | |
| Old Designation | ["B7204C.2RSD.T.P4S.UL"] | |
| X Life Marking | n.r. | |
| SAP material number | 0386135060000 | |
| Base product | 2305080311 | |
| Bearing X designation | B7204-C-2RSD-T-P4S | |
| Mounting Manager ID | B7204-C-2RSD-T-P4S |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Spindle bearing B72..-C-2RSD, adjusted, in pairs or sets, contact angle α = 15°, lip seals on both sides, non-contact, restricted tolerances | |
| Short Description | Spindle bearing |
Additional information9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Preload force light | FV L | 75 N16.862 lbf |
| Preload force medium | FV M | 248 N55.755 lbf |
| Preload force heavy | FV H | 496 N111.511 lbf |
| Lift-off force light | KaE L | 234 N52.608 lbf |
| Lift-off force medium | KaE M | 851 N191.322 lbf |
| Lift-off force heavy | KaE H | 1,828 N410.971 lbf |
| Axial rigidity light | ca L | 28 N/µm |
| Axial rigidity medium | ca M | 49 N/µm |
| Axial rigidity heavy | ca H | 71 N/µm |
Technical Data26 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter (D) | 20 mm | |
| Outside Diameter (D) | 47 mm | |
| Width (B) | 14 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 17,200 N | |
| Basic Static Load Rating, Radial (C0R) | 8,000 N | |
| Operating Temperature Min. (Tmin) | -30 °C | |
| Operating Temperature Max. (Tmax) | 80 °C | |
| Axial Rigidity Heavy (Ca H) | 71 N/µm | |
| Axial Rigidity Light (Ca L) | 28 N/µm | |
| Axial Rigidity Medium (Ca M) | 49 N/µm | |
| Diameter Shaft Shoulder (Da) | 26.5 mm | |
| Lift Off Force Heavy (Kae H) | 1,828 N | |
| Lift Off Force Light (Kae L) | 234 N | |
| Lift Off Force Medium (Kae M) | 851 N | |
| Preload Force Heavy (Fv H) | 496 N | |
| Preload Force Light (Fv L) | 75 N | |
| Preload Force Medium (Fv M) | 248 N | |
| Shoulder Diameter Outer Ring (Da) | 40.5 mm | |
| Limiting Speed For Grease Lubrication (Ng Grea) | 32,000 1/min | |
| Fatigue Load Limit, Radial (Cur) | 850 N | |
| Minimum Chamfer Dimension (Rmin) | 1 mm | |
| Maximum Fillet Radius (Ra Max) | 1 mm | |
| Maximum Recess Radius (Ra1 Max) | 0.3 mm | |
| Minimum Chamfer Dimension (R1 Min) | 1 mm | |
| Contact Angle (Α) | 15 ° | |
| Distance Between The Apexes Of The Pressure Cones (A) | 11.5 mm |
