Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications13 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | B7202 | |
| Bore diameter | d | 15 mm |
| Outside diameter | D | 35 mm |
| Width | B | 11 mm |
| Basic dynamic load rating | C | 11.1 kN |
| Basic static load rating | C0 | 4.85 kN |
| Fatigue load limit | Pu | 0.52 kN |
| Mass | ≈m | 0.047 kg |
| Precision class | P4S — Tolerance class P4S, FAG standard better than P4 to ISO 492:2023 | |
| Cage | T — Laminated fabric cage | |
| Lubricant | GA21 — Grease for super precision bearings, standard | |
| Minimum operating temperature | Tmin | -30 °C |
| Maximum operating temperature | Tmax | 80 °C |
Product characteristics6 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Preload class | L | Preload light |
| Contact angle | E | Contact angle 25° |
| Tolerance class | P4S | Tolerance class P4S, FAG standard better than P4 to ISO 492:2023 |
| Cage | T | Laminated fabric cage |
| Arrangement bearing set | U | Single bearing |
| Lubricant | GA21 | Grease for super precision bearings, standard |
Main Dimensions & Performance Data8 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 15 mm0.591 in |
| Outside diameter | D | 35 mm1.378 in |
| Width | B | 11 mm0.433 in |
| Basic dynamic load rating, radial | Cr | 11,100 N2,495.504 lbf |
| Basic static load rating, radial | C0r | 4,850 N1,090.378 lbf |
| Fatigue load limit, radial | Cur | 520 N116.906 lbf |
| Limiting speed for grease lubrication | nG Grease | 40,000 1/min |
| Mass | ≈m | 47 g1.658 oz |
Mounting dimensions7 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Diameter shaft shoulder | da | 19.5 mm0.768 in |
| Diameter shaft shoulder clearance | da | h12 |
| Shoulder diameter outer ring | Da | 30.5 mm1.201 in |
| Shoulder diameter outer ring clearance | Da | H12 |
| Maximum recess radius | ra max | 0.6 mm0.024 in |
| Maximum recess radius | ra1 max | 0.3 mm0.012 in |
| Distance between the apexes of the pressure cones | a | 11.3 mm0.445 in |
Dimensions3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum chamfer dimension | rmin | 0.6 mm0.024 in |
| Minimum chamfer dimension | r1 min | 0.6 mm0.024 in |
| Contact angle | α | 25 ° |
Temperature range2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Operating temperature min. | Tmin | -30 °C-22 °F |
| Operating temperature max. | Tmax | 80 °C176 °F |
Capabilities & suitability5 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial load capacity | Yes | |
| Axial load capacity in one direction | Yes | |
| Lifetimelubricationfreedomfrommaintenance | Yes | |
| Suitable for grease lubrication | Yes | |
| Sealedonbothsides | Yes |
Manufacturer Identity9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 362133 | |
| Brand | FAG | |
| Base Type | B7202 | |
| Old Designation | ["B7202E.2RSD.T.P4S.UL"] | |
| X Life Marking | n.r. | |
| SAP material number | 0386134760000 | |
| Base product | 2305080311 | |
| Bearing X designation | B7202-E-2RSD-T-P4S | |
| Mounting Manager ID | B7202-E-2RSD-T-P4S |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Spindle bearing B72..-E-2RSD, adjusted, in pairs or sets, contact angle α = 25°, lip seals on both sides, non-contact, restricted tolerances | |
| Short Description | Spindle bearing |
Additional information9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Preload force light | FV L | 64 N14.388 lbf |
| Preload force medium | FV M | 252 N56.655 lbf |
| Preload force heavy | FV H | 546 N122.752 lbf |
| Lift-off force light | KaE L | 187 N42.041 lbf |
| Lift-off force medium | KaE M | 768 N172.662 lbf |
| Lift-off force heavy | KaE H | 1,732 N389.388 lbf |
| Axial rigidity light | ca L | 50 N/µm |
| Axial rigidity medium | ca M | 84 N/µm |
| Axial rigidity heavy | ca H | 117 N/µm |
Technical Data26 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter (D) | 15 mm | |
| Outside Diameter (D) | 35 mm | |
| Width (B) | 11 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 11,100 N | |
| Basic Static Load Rating, Radial (C0R) | 4,850 N | |
| Operating Temperature Min. (Tmin) | -30 °C | |
| Operating Temperature Max. (Tmax) | 80 °C | |
| Axial Rigidity Heavy (Ca H) | 117 N/µm | |
| Axial Rigidity Light (Ca L) | 50 N/µm | |
| Axial Rigidity Medium (Ca M) | 84 N/µm | |
| Diameter Shaft Shoulder (Da) | 19.5 mm | |
| Lift Off Force Heavy (Kae H) | 1,732 N | |
| Lift Off Force Light (Kae L) | 187 N | |
| Lift Off Force Medium (Kae M) | 768 N | |
| Preload Force Heavy (Fv H) | 546 N | |
| Preload Force Light (Fv L) | 64 N | |
| Preload Force Medium (Fv M) | 252 N | |
| Shoulder Diameter Outer Ring (Da) | 30.5 mm | |
| Limiting Speed For Grease Lubrication (Ng Grea) | 40,000 1/min | |
| Fatigue Load Limit, Radial (Cur) | 520 N | |
| Minimum Chamfer Dimension (Rmin) | 0.6 mm | |
| Maximum Fillet Radius (Ra Max) | 0.6 mm | |
| Maximum Recess Radius (Ra1 Max) | 0.3 mm | |
| Minimum Chamfer Dimension (R1 Min) | 0.6 mm | |
| Contact Angle (Α) | 25 ° | |
| Distance Between The Apexes Of The Pressure Cones (A) | 11.3 mm |
