Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications13 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | B7034 | |
| Bore diameter | d | 170 mm |
| Outside diameter | D | 260 mm |
| Width | B | 42 mm |
| Basic dynamic load rating | C | 241 kN |
| Basic static load rating | C0 | 189 kN |
| Fatigue load limit | Pu | 13.7 kN |
| Mass | ≈m | 6.41 kg |
| Precision class | P4S — Tolerance class P4S, FAG standard better than P4 to ISO 492:2023 | |
| Sealing | Without — Not sealed | |
| Cage | T — Laminated fabric cage | |
| Minimum operating temperature | Tmin | -30 °C |
| Maximum operating temperature | Tmax | 100 °C |
Product characteristics6 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Preload class | L | Preload light |
| Contact angle | C | Contact angle 15° |
| Tolerance class | P4S | Tolerance class P4S, FAG standard better than P4 to ISO 492:2023 |
| Type of Seal | Without | Not sealed |
| Cage | T | Laminated fabric cage |
| Arrangement bearing set | U | Single bearing |
Main Dimensions & Performance Data9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 170 mm6.693 in |
| Outside diameter | D | 260 mm10.236 in |
| Width | B | 42 mm1.654 in |
| Basic dynamic load rating, radial | Cr | 241,000 N54,181.655 lbf |
| Basic static load rating, radial | C0r | 189,000 N42,491.007 lbf |
| Fatigue load limit, radial | Cur | 13,700 N3,080.036 lbf |
| Limiting speed for grease lubrication | nG Grease | 5,300 1/min |
| Limiting speed for oil lubrication | nG Oil | 8,000 1/min |
| Mass | ≈m | 6.41 kg14.132 lbs |
Mounting dimensions11 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Diameter shaft shoulder | da | 185 mm7.283 in |
| Diameter shaft shoulder clearance | da | h12 |
| Shoulder diameter outer ring | Da | 246 mm9.685 in |
| Shoulder diameter outer ring clearance | Da | H12 |
| Maximum recess radius | ra max | 2.1 mm0.083 in |
| Maximum recess radius | ra1 max | 1 mm0.039 in |
| Minimum diameter injection pitch | Etk min | 195.9 mm7.713 in |
| Maximum diameter injection pitch | Etk max | 206.9 mm8.146 in |
| Minimum diameter injection pitch | Etk1 min | 195.9 mm7.713 in |
| Maximum diameter injection pitch | Etk1 max | 206.9 mm8.146 in |
| Distance between the apexes of the pressure cones | a | 49.8 mm1.961 in |
Dimensions3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum chamfer dimension | rmin | 2.1 mm0.083 in |
| Minimum chamfer dimension | r1 min | 2.1 mm0.083 in |
| Contact angle | α | 15 ° |
Temperature range2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Operating temperature min. | Tmin | -30 °C-22 °F |
| Operating temperature max. | Tmax | 100 °C212 °F |
Capabilities & suitability5 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial load capacity | Yes | |
| Axial load capacity in one direction | Yes | |
| Suitable for grease lubrication | Yes | |
| Suitable for oil lubrication | Yes | |
| Unsealed design | Yes |
Manufacturer Identity9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 361500 | |
| Brand | FAG | |
| Base Type | B7034 | |
| Old Designation | ["B7034C.TPA.P4.UL","B7034C.T.P4S.UL"] | |
| X Life Marking | n.r. | |
| SAP material number | 0191530740000 | |
| Base product | 2305080311 | |
| Bearing X designation | B7034-C-T-P4S | |
| Mounting Manager ID | B7034-C-T-P4S |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Spindle bearing B70..-C, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances | |
| Short Description | Spindle bearing |
Additional information9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Preload force light | FV L | 1,448 N325.54 lbf |
| Preload force medium | FV M | 4,488 N1,008.993 lbf |
| Preload force heavy | FV H | 8,919 N2,005.171 lbf |
| Lift-off force light | KaE L | 4,439 N997.977 lbf |
| Lift-off force medium | KaE M | 14,768 N3,320.144 lbf |
| Lift-off force heavy | KaE H | 31,222 N7,019.335 lbf |
| Axial rigidity light | ca L | 171 N/µm |
| Axial rigidity medium | ca M | 282 N/µm |
| Axial rigidity heavy | ca H | 397 N/µm |
Technical Data31 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter (D) | 170 mm | |
| Outside Diameter (D) | 260 mm | |
| Width (B) | 42 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 241,000 N | |
| Basic Static Load Rating, Radial (C0R) | 189,000 N | |
| Operating Temperature Min. (Tmin) | -30 °C | |
| Operating Temperature Max. (Tmax) | 100 °C | |
| Axial Rigidity Heavy (Ca H) | 397 N/µm | |
| Axial Rigidity Light (Ca L) | 171 N/µm | |
| Axial Rigidity Medium (Ca M) | 282 N/µm | |
| Diameter Shaft Shoulder (Da) | 185 mm | |
| Lift Off Force Heavy (Kae H) | 31,222 N | |
| Lift Off Force Light (Kae L) | 4,439 N | |
| Lift Off Force Medium (Kae M) | 14,768 N | |
| Limiting Speed For Oil Lubrication (Ng Oil) | 8,000 1/min | |
| Maximum Diameter Injection Pitch (Etk1 Ma) | 206.9 mm | |
| Maximum Diameter Injection Pitch (Etk Max) | 206.9 mm | |
| Minimum Diameter Injection Pitch (Etk1 Mi) | 195.9 mm | |
| Preload Force Heavy (Fv H) | 8,919 N | |
| Preload Force Light (Fv L) | 1,448 N | |
| Preload Force Medium (Fv M) | 4,488 N | |
| Shoulder Diameter Outer Ring (Da) | 246 mm | |
| Limiting Speed For Grease Lubrication (Ng Grea) | 5,300 1/min | |
| Minimum Diameter Injection Pitch (Etk Min) | 195.9 mm | |
| Fatigue Load Limit, Radial (Cur) | 13,700 N | |
| Minimum Chamfer Dimension (Rmin) | 2.1 mm | |
| Maximum Fillet Radius (Ra Max) | 2.1 mm | |
| Maximum Recess Radius (Ra1 Max) | 1 mm | |
| Minimum Chamfer Dimension (R1 Min) | 2.1 mm | |
| Contact Angle (Α) | 15 ° | |
| Distance Between The Apexes Of The Pressure Cones (A) | 49.8 mm |