Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications16 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | 7316 | |
| Bore diameter | d | 80 mm |
| Outside diameter | D | 170 mm |
| Width | B | 39 mm |
| Basic dynamic load rating | C | 155 kN |
| Basic static load rating | C0 | 124 kN |
| Fatigue load limit | Pu | 7.7 kN |
| Reference speed | nref | 4250 r/min |
| Limiting speed | nG | 6800 r/min |
| Mass | ≈m | 4.095 kg |
| Precision class | P6 — Class 6 (ISO 492:2023) | |
| Sealing | Without — Not sealed | |
| Cage | MP — Solid brass cage, ball guided | |
| Lubricant | Without — Bearing not greased | |
| Minimum operating temperature | Tmin | -30 °C |
| Maximum operating temperature | Tmax | 200 °C |
Precision classification2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial ball bearing tolerance equivalent | ABEC 3Derived from ISO P6; not a direct ABEC marking | |
| Mapping basis | ISO 492 / ANSI/ABMA 20The original manufacturer tolerance remains the controlling value. |
Product characteristics7 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Design variant | B | |
| Type of Seal | Without | Not sealed |
| Cage | MP | Solid brass cage, ball guided |
| Tolerance class | P6 | Class 6 (ISO 492:2023) |
| Dimensional / heat stabilization | S1 | Rings dimensional stabilized up to 200° |
| Bearing with matched conditions for fitting in pairs | UA | Bearing set with small axial internal clearance |
| Lubricant | Without | Bearing not greased |
Main Dimensions & Performance Data9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 80 mm3.15 in |
| Outside diameter | D | 170 mm6.693 in |
| Width | B | 39 mm1.535 in |
| Basic dynamic load rating, radial | Cr | 155,000 N34,847.122 lbf |
| Basic static load rating, radial | C0r | 124,000 N27,877.698 lbf |
| Fatigue load limit, radial | Cur | 7,700 N1,731.115 lbf |
| Limiting speed | nG | 6,800 1/min |
| Reference speed | nϑr | 4,250 1/min |
| Mass | ≈m | 4.095 kg9.028 lbs |
Mounting dimensions5 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum diameter of shaft shoulder | da min | 92 mm3.622 in |
| Maximum diameter of housing shoulder | Da max | 158 mm6.22 in |
| Maximum diameter of housing shoulder | Db max | 163 mm6.417 in |
| Maximum fillet radius of shaft | ra max | 2.1 mm0.083 in |
| Maximum fillet radius of housing | ra1 max | 1 mm0.039 in |
Dimensions6 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum chamfer dimension | rmin | 2.1 mm0.083 in |
| Minimum chamfer dimension | r1 min | 1.1 mm0.043 in |
| Shoulder diameter on outer ring wide side face | D1 | 136.7 mm5.382 in |
| Shoulder diameter on inner ring wide side face | d1 | 115.7 mm4.555 in |
| Distance between the apexes of the pressure cones | a | 71.9 mm2.831 in |
| Contact angle | α | 40 ° |
Temperature range2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Operating temperature min. | Tmin | -30 °C-22 °F |
| Operating temperature max. | Tmax | 200 °C392 °F |
Capabilities & suitability5 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial load capacity | Yes | |
| Axial load capacity in one direction | Yes | |
| Suitable for grease lubrication | Yes | |
| Suitable for oil lubrication | Yes | |
| Unsealed design | Yes |
Manufacturer Identity9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 360322 | |
| Brand | FAG | |
| Base Type | 7316 | |
| X Life Marking | XL | |
| SAP material number | 0191178840000 | |
| Base product | 2305080301 | |
| Bearing X designation | 7316-B-XL-MP-P6-S1-UA | |
| Mounting Manager ID | 7316-B-XL-MP-P6-S1-UA | |
| Grease application ID | 7316-B-XL-MP-P6-S1-UA |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Angular contact ball bearing 73..-B-XL-MP, single row, X-life, solid brass cage | |
| Short Description | Angular contact ball bearing |
Additional information2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Tolerance for axial clearance or preload per set | Tol(+) | 12 µm0.00047 in |
| Axial clearance per set min. | Amin | 50 mm1.969 in |
Technical Data22 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter (D) | 80 mm | |
| Outside Diameter (D) | 170 mm | |
| Width (B) | 39 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 155,000 N | |
| Basic Static Load Rating, Radial (C0R) | 124,000 N | |
| Operating Temperature Min. (Tmin) | -30 °C | |
| Limiting Speed (Ng) | 6,800 1/min | |
| Operating Temperature Max. (Tmax) | 200 °C | |
| Reference Speed (Nϑr) | 4,250 1/min | |
| Maximum Diameter Of Housing Shoulder (Db Max) | 163 mm | |
| Tolerance For Axial Clearance Or Preload Per Set (Tol(+)) | 12 µm | |
| Fatigue Load Limit, Radial (Cur) | 7,700 N | |
| Minimum Diameter Shaft Shoulder (Da Min) | 92 mm | |
| Shoulder Diameter Inner Ring (D1) | 115.7 mm | |
| Maximum Diameter Of Housing Shoulder (Da Max) | 158 mm | |
| Minimum Chamfer Dimension (Rmin) | 2.1 mm | |
| Maximum Fillet Radius (Ra Max) | 2.1 mm | |
| Maximum Recess Radius (Ra1 Max) | 1 mm | |
| Shoulder Diameter Outer Ring (D1) | 136.7 mm | |
| Minimum Chamfer Dimension (R1 Min) | 1.1 mm | |
| Contact Angle (Α) | 40 ° | |
| Distance Between The Apexes Of The Pressure Cones (A) | 71.9 mm |
