Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications15 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | 7212 | |
| Bore diameter | d | 60 mm |
| Outside diameter | D | 110 mm |
| Width | B | 22 mm |
| Basic dynamic load rating | C | 62 kN |
| Basic static load rating | C0 | 45 kN |
| Fatigue load limit | Pu | 3.15 kN |
| Limiting speed | nG | 3450 r/min |
| Mass | ≈m | 0.795 kg |
| Precision class | P6 — Class 6 (ISO 492:2023) | |
| Sealing | 2RS — Contact seal on both sides | |
| Cage | TVP — Solid cage made of glass-fiber reinforced polyamid PA66 | |
| Lubricant | GA13 — Ball bearing and insert bearing grease | |
| Minimum operating temperature | Tmin | -20 °C |
| Maximum operating temperature | Tmax | 100 °C |
Precision classification2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial ball bearing tolerance equivalent | ABEC 3Derived from ISO P6; not a direct ABEC marking | |
| Mapping basis | ISO 492 / ANSI/ABMA 20The original manufacturer tolerance remains the controlling value. |
Product characteristics7 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Design variant | B | |
| Type of Seal | 2RS | Contact seal on both sides |
| Cage | TVP | Solid cage made of glass-fiber reinforced polyamid PA66 |
| Tolerance class | P6 | Class 6 (ISO 492:2023) |
| Dimensional / heat stabilization | S0 | Rings dimensional stabilized up to 150° |
| Bearing with matched conditions for fitting in pairs | UL | Bearing set with light preload |
| Lubricant | GA13 | Ball bearing and insert bearing grease |
Main Dimensions & Performance Data8 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 60 mm2.362 in |
| Outside diameter | D | 110 mm4.331 in |
| Width | B | 22 mm0.866 in |
| Basic dynamic load rating, radial | Cr | 62,000 N13,938.849 lbf |
| Basic static load rating, radial | C0r | 45,000 N10,116.906 lbf |
| Fatigue load limit, radial | Cur | 3,150 N708.183 lbf |
| Limiting speed | nG | 3,450 1/min |
| Mass | ≈m | 0.795 kg1.753 lbs |
Mounting dimensions5 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum diameter of shaft shoulder | da min | 69 mm2.717 in |
| Maximum diameter of housing shoulder | Da max | 101 mm3.976 in |
| Maximum diameter of housing shoulder | Db max | 104.4 mm4.11 in |
| Maximum fillet radius of shaft | ra max | 1.5 mm0.059 in |
| Maximum fillet radius of housing | ra1 max | 1 mm0.039 in |
Dimensions9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum chamfer dimension | rmin | 1.5 mm0.059 in |
| Minimum chamfer dimension | r1 min | 1 mm0.039 in |
| Shoulder diameter on outer ring wide side face | D1 | 90.84 mm3.576 in |
| Caliber diameter on outer ring wide side face | D2 | 94.36 mm3.715 in |
| Caliber diameter on outer ring small side face | D3 | 103.42 mm4.072 in |
| Shoulder diameter on inner ring wide side face | d1 | 80.32 mm3.162 in |
| Caliber diameter on inner ring wide side face | d2 | 75.26 mm2.963 in |
| Distance between the apexes of the pressure cones | a | 46.7 mm1.839 in |
| Contact angle | α | 40 ° |
Temperature range2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Operating temperature min. | Tmin | -20 °C-4 °F |
| Operating temperature max. | Tmax | 100 °C212 °F |
Capabilities & suitability5 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial load capacity | Yes | |
| Axial load capacity in one direction | Yes | |
| Lifetimelubricationfreedomfrommaintenance | Yes | |
| Suitable for grease lubrication | Yes | |
| Sealedonbothsides | Yes |
Manufacturer Identity9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 359360 | |
| Brand | FAG | |
| Base Type | 7212 | |
| Old Designation | ["7212-B-2RS-TVP-UL"] | |
| X Life Marking | XL | |
| SAP material number | 0663334230000 | |
| Base product | 2305080301 | |
| Bearing X designation | 7212-B-XL-2RS-TVP-UL | |
| Mounting Manager ID | 7212-B-XL-2RS-TVP-UL |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Angular contact ball bearing 72..-B-XL-2RS-TVP, single row, X-life, seals, plastic cage | |
| Short Description | Angular contact ball bearing |
Additional information3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Preload per set max. | Vmax | -8 µm-0.00031 in |
| Tolerance for axial clearance or preload per set | Tol(+) | 12 µm0.00047 in |
| Preload force | FV max | 431 N96.897 lbf |
Technical Data26 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter (D) | 60 mm | |
| Outside Diameter (D) | 110 mm | |
| Width (B) | 22 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 62,000 N | |
| Basic Static Load Rating, Radial (C0R) | 45,000 N | |
| Operating Temperature Min. (Tmin) | -20 °C | |
| Limiting Speed (Ng) | 3,450 1/min | |
| Operating Temperature Max. (Tmax) | 100 °C | |
| Caliber Diameter On Outer Ring Small Side Face (D3) | 103.42 mm | |
| Caliber Diameter Outer Ring (D2) | 94.36 mm | |
| Preload Force (Fv Max) | 431 N | |
| Preload Per Set Max. (Vmax) | -8 µm | |
| Maximum Diameter Of Housing Shoulder (Db Max) | 104.4 mm | |
| Tolerance For Axial Clearance Or Preload Per Set (Tol(+)) | 12 µm | |
| Fatigue Load Limit, Radial (Cur) | 3,150 N | |
| Minimum Diameter Shaft Shoulder (Da Min) | 69 mm | |
| Shoulder Diameter Inner Ring (D1) | 80.32 mm | |
| Maximum Diameter Of Housing Shoulder (Da Max) | 101 mm | |
| Minimum Chamfer Dimension (Rmin) | 1.5 mm | |
| Caliber Diameter Inner Ring (D1) | 75.26 mm | |
| Maximum Fillet Radius (Ra Max) | 1.5 mm | |
| Maximum Recess Radius (Ra1 Max) | 1 mm | |
| Shoulder Diameter Outer Ring (D1) | 90.84 mm | |
| Minimum Chamfer Dimension (R1 Min) | 1 mm | |
| Contact Angle (Α) | 40 ° | |
| Distance Between The Apexes Of The Pressure Cones (A) | 46.7 mm |