Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications16 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | 718/710 | |
| Bore diameter | d | 710 mm |
| Outside diameter | D | 870 mm |
| Width | B | 74 mm |
| Basic dynamic load rating | C | 590 kN |
| Basic static load rating | C0 | 1460 kN |
| Fatigue load limit | Pu | 30 kN |
| Reference speed | nref | 520 r/min |
| Limiting speed | nG | 1000 r/min |
| Mass | ≈m | 95 kg |
| Precision class | P5 — Class 5 (ISO 492:2023) | |
| Sealing | Without — Not sealed | |
| Cage | MPB — Solid brass cage, inner ring guided | |
| Lubricant | Without — Bearing not greased | |
| Minimum operating temperature | Tmin | -30 °C |
| Maximum operating temperature | Tmax | 200 °C |
Precision classification2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial ball bearing tolerance equivalent | ABEC 5Derived from ISO P5; not a direct ABEC marking | |
| Mapping basis | ISO 492 / ANSI/ABMA 20The original manufacturer tolerance remains the controlling value. |
Product characteristics5 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Type of Seal | Without | Not sealed |
| Cage | MPB | Solid brass cage, inner ring guided |
| Tolerance class | P5 | Class 5 (ISO 492:2023) |
| Dimensional / heat stabilization | S1 | Rings dimensional stabilized up to 200° |
| Lubricant | Without | Bearing not greased |
Main Dimensions & Performance Data9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 710 mm27.953 in |
| Outside diameter | D | 870 mm34.252 in |
| Width | B | 74 mm2.913 in |
| Basic dynamic load rating, radial | Cr | 590,000 N132,643.885 lbf |
| Basic static load rating, radial | C0r | 1,460,000 N328,237.41 lbf |
| Fatigue load limit, radial | Cur | 30,000 N6,744.604 lbf |
| Limiting speed | nG | 1,000 1/min |
| Reference speed | nϑr | 520 1/min |
| Mass | ≈m | 95 kg209.439 lbs |
Mounting dimensions5 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum diameter of shaft shoulder | da min | 724.6 mm28.528 in |
| Maximum diameter of housing shoulder | Da max | 855.4 mm33.677 in |
| Maximum diameter of housing shoulder | Db max | 863 mm33.976 in |
| Maximum fillet radius of shaft | ra max | 3 mm0.118 in |
| Maximum fillet radius of housing | ra1 max | 1.5 mm0.059 in |
Dimensions6 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum chamfer dimension | rmin | 4 mm0.157 in |
| Minimum chamfer dimension | r1 min | 1.5 mm0.059 in |
| Shoulder diameter on outer ring wide side face | D1 | 811.15 mm31.935 in |
| Shoulder diameter on inner ring wide side face | d1 | 771 mm30.354 in |
| Distance between the apexes of the pressure cones | a | 265.1 mm10.437 in |
| Contact angle | α | 30 ° |
Temperature range2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Operating temperature min. | Tmin | -30 °C-22 °F |
| Operating temperature max. | Tmax | 200 °C392 °F |
Capabilities & suitability6 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial load capacity | Yes | |
| Axial load capacity in one direction | Yes | |
| Suitable for grease lubrication | Yes | |
| Suitable for oil lubrication | Yes | |
| Unsealed design | Yes | |
| Largebearing | Yes |
Manufacturer Identity9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 359180 | |
| Brand | FAG | |
| Base Type | 718/710 | |
| Old Designation | ["718/710MPB.P5"] | |
| SAP material number | 0385654550000 | |
| Base product | 2305080301 | |
| Bearing X designation | 718/710-MPB-P5 | |
| Mounting Manager ID | 718/710-MPB-P5 | |
| Grease application ID | 718/710-MPB-P5 |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Angular contact ball bearing 718..-MPB, single row, solid brass cage | |
| Short Description | Angular contact ball bearing |
Technical Data21 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter (D) | 710 mm | |
| Outside Diameter (D) | 870 mm | |
| Width (B) | 74 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 590,000 N | |
| Basic Static Load Rating, Radial (C0R) | 1,460,000 N | |
| Operating Temperature Min. (Tmin) | -30 °C | |
| Limiting Speed (Ng) | 1,000 1/min | |
| Operating Temperature Max. (Tmax) | 200 °C | |
| Reference Speed (Nϑr) | 520 1/min | |
| Maximum Diameter Of Housing Shoulder (Db Max) | 863 mm | |
| Fatigue Load Limit, Radial (Cur) | 30,000 N | |
| Minimum Diameter Shaft Shoulder (Da Min) | 724.6 mm | |
| Shoulder Diameter Inner Ring (D1) | 771 mm | |
| Maximum Diameter Of Housing Shoulder (Da Max) | 855.4 mm | |
| Minimum Chamfer Dimension (Rmin) | 4 mm | |
| Maximum Fillet Radius (Ra Max) | 3 mm | |
| Maximum Recess Radius (Ra1 Max) | 1.5 mm | |
| Shoulder Diameter Outer Ring (D1) | 811.15 mm | |
| Minimum Chamfer Dimension (R1 Min) | 1.5 mm | |
| Contact Angle (Α) | 30 ° | |
| Distance Between The Apexes Of The Pressure Cones (A) | 265.1 mm |