Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications16 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | 70876 | |
| Bore diameter | d | 380 mm |
| Outside diameter | D | 480 mm |
| Width | B | 31 mm |
| Basic dynamic load rating | C | 164 kN |
| Basic static load rating | C0 | 330 kN |
| Fatigue load limit | Pu | 8.2 kN |
| Reference speed | nref | 990 r/min |
| Limiting speed | nG | 1950 r/min |
| Mass | ≈m | 13.8 kg |
| Precision class | PN — Normal (ISO 492:2023) | |
| Sealing | Without — Not sealed | |
| Cage | MP — Solid brass cage, ball guided | |
| Lubricant | Without — Bearing not greased | |
| Minimum operating temperature | Tmin | -30 °C |
| Maximum operating temperature | Tmax | 200 °C |
Precision classification2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial ball bearing tolerance equivalent | ABEC 1Derived from ISO Normal; not a direct ABEC marking | |
| Mapping basis | ISO 492 / ANSI/ABMA 20The original manufacturer tolerance remains the controlling value. |
Product characteristics5 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Type of Seal | Without | Not sealed |
| Cage | MP | Solid brass cage, ball guided |
| Tolerance class | PN | Normal (ISO 492:2023) |
| Dimensional / heat stabilization | S1 | Rings dimensional stabilized up to 200° |
| Lubricant | Without | Bearing not greased |
Main Dimensions & Performance Data9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 380 mm14.961 in |
| Outside diameter | D | 480 mm18.898 in |
| Width | B | 31 mm1.22 in |
| Basic dynamic load rating, radial | Cr | 164,000 N36,870.504 lbf |
| Basic static load rating, radial | C0r | 330,000 N74,190.647 lbf |
| Fatigue load limit, radial | Cur | 8,200 N1,843.525 lbf |
| Limiting speed | nG | 1,950 1/min |
| Reference speed | nϑr | 990 1/min |
| Mass | ≈m | 13.8 kg30.424 lbs |
Mounting dimensions5 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum diameter of shaft shoulder | da min | 388.8 mm15.307 in |
| Maximum diameter of housing shoulder | Da max | 471.2 mm18.551 in |
| Maximum diameter of housing shoulder | Db max | 475.4 mm18.717 in |
| Maximum fillet radius of shaft | ra max | 2 mm0.079 in |
| Maximum fillet radius of housing | ra1 max | 1 mm0.039 in |
Dimensions6 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum chamfer dimension | rmin | 2 mm0.079 in |
| Minimum chamfer dimension | r1 min | 1 mm0.039 in |
| Shoulder diameter on outer ring wide side face | D1 | 438.7 mm17.272 in |
| Shoulder diameter on inner ring wide side face | d1 | 421.3 mm16.587 in |
| Distance between the apexes of the pressure cones | a | 139.6 mm5.496 in |
| Contact angle | α | 30 ° |
Temperature range2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Operating temperature min. | Tmin | -30 °C-22 °F |
| Operating temperature max. | Tmax | 200 °C392 °F |
Capabilities & suitability6 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial load capacity | Yes | |
| Axial load capacity in one direction | Yes | |
| Suitable for grease lubrication | Yes | |
| Suitable for oil lubrication | Yes | |
| Unsealed design | Yes | |
| Largebearing | Yes |
Manufacturer Identity8 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 1794510 | |
| Brand | FAG | |
| Base Type | 70876 | |
| X Life Marking | n.r. | |
| Base product | 2305080301 | |
| Bearing X designation | 70876-MP | |
| Mounting Manager ID | 70876-MP | |
| Grease application ID | 70876-MP |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Angular contact ball bearing 708..-MP, single row, solid brass cage | |
| Short Description | Angular contact ball bearing |
Technical Data21 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter (D) | 380 mm | |
| Outside Diameter (D) | 480 mm | |
| Width (B) | 31 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 164,000 N | |
| Basic Static Load Rating, Radial (C0R) | 330,000 N | |
| Operating Temperature Min. (Tmin) | -30 °C | |
| Limiting Speed (Ng) | 1,950 1/min | |
| Operating Temperature Max. (Tmax) | 200 °C | |
| Reference Speed (Nϑr) | 990 1/min | |
| Maximum Diameter Of Housing Shoulder (Db Max) | 475.4 mm | |
| Fatigue Load Limit, Radial (Cur) | 8,200 N | |
| Minimum Diameter Shaft Shoulder (Da Min) | 388.8 mm | |
| Shoulder Diameter Inner Ring (D1) | 421.3 mm | |
| Maximum Diameter Of Housing Shoulder (Da Max) | 471.2 mm | |
| Minimum Chamfer Dimension (Rmin) | 2 mm | |
| Maximum Fillet Radius (Ra Max) | 2 mm | |
| Maximum Recess Radius (Ra1 Max) | 1 mm | |
| Shoulder Diameter Outer Ring (D1) | 438.7 mm | |
| Minimum Chamfer Dimension (R1 Min) | 1 mm | |
| Contact Angle (Α) | 30 ° | |
| Distance Between The Apexes Of The Pressure Cones (A) | 139.6 mm |