Product specifications

Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.

Core specifications15 parameters

Core specifications
Parameter	Symbol	Value
Series		3215
Bore diameter	d	75 mm
Outside diameter	D	130 mm
Width	B	41.3 mm
Basic dynamic load rating	C	88 kN
Basic static load rating	C0	85 kN
Fatigue load limit	Pu	4.35 kN
Limiting speed	nG	2900 r/min
Mass	≈m	1.8 kg
Precision class		PN — Normal (ISO 492:2023)
Sealing		2RSR — Contact seal on both sides
Cage		TVH — Solid cage made of glass-fiber reinforced polyamide PA66
Lubricant		GA13 — Ball bearing and insert bearing grease
Minimum operating temperature	Tmin	-20 °C
Maximum operating temperature	Tmax	100 °C

Precision classification2 parameters

Precision classification
Parameter	Symbol	Value
Radial ball bearing tolerance equivalent		ABEC 1Derived from ISO Normal; not a direct ABEC marking
Mapping basis		ISO 492 / ANSI/ABMA 20The original manufacturer tolerance remains the controlling value.

Product characteristics7 parameters

Product characteristics
Parameter	Symbol	Value
Design variant	B	Bearing without filling slot
Type of Seal	2RSR	Contact seal on both sides
Cage	TVH	Solid cage made of glass-fiber reinforced polyamide PA66
Tolerance class	PN	Normal (ISO 492:2023)
Dimensional / heat stabilization	S0	Rings dimensional stabilized up to 150°
Lubricant	GA13	Ball bearing and insert bearing grease
Axial internal clearance	CN	Group N (CN)

Main Dimensions & Performance Data8 parameters

Main Dimensions & Performance Data
Parameter	Symbol	Value
Bore diameter	d	75 mm2.953 in
Outside diameter	D	130 mm5.118 in
Width	B	41.3 mm1.626 in
Basic dynamic load rating, radial	Cr	88,000 N19,784.173 lbf
Basic static load rating, radial	C0r	85,000 N19,109.712 lbf
Fatigue load limit, radial	Cur	4,350 N977.968 lbf
Limiting speed	nG	2,900 1/min
Mass	≈m	1.8 kg3.968 lbs

Mounting dimensions3 parameters

Mounting dimensions
Parameter	Symbol	Value
Minimum diameter shaft shoulder	da min	84 mm3.307 in
Maximum diameter of housing shoulder	Da max	121 mm4.764 in
Maximum fillet radius	ra max	1.5 mm0.059 in

Dimensions6 parameters

Dimensions
Parameter	Symbol	Value
Minimum chamfer dimension	rmin	1.5 mm0.059 in
Shoulder diameter outer ring	D1	112.6 mm4.433 in
Caliber diameter outer ring	D2	115.5 mm4.547 in
Shoulder diameter inner ring	d1	92.1 mm3.626 in
Distance between the apexes of the pressure cones	a	65.2 mm2.567 in
Contact angle	α	25 °

Temperature range2 parameters

Temperature range
Parameter	Symbol	Value
Operating temperature min.	Tmin	-20 °C-4 °F
Operating temperature max.	Tmax	100 °C212 °F

Capabilities & suitability6 parameters

Capabilities & suitability
Parameter	Symbol	Value
Radial load capacity		Yes
Axial load capacity in one direction		Yes
Axial load capacity in both directions		Yes
Lifetimelubricationfreedomfrommaintenance		Yes
Suitable for grease lubrication		Yes
Sealedonbothsides		Yes

Manufacturer Identity10 parameters

Product Identity2 parameters

Product Identity
Parameter	Symbol	Value
Construction		Angular contact ball bearing 32..-B-2RSR-TVH, double row, seals, plastic cage
Short Description		Angular contact ball bearing

Technical Data18 parameters

Technical Data
Parameter	Symbol	Value
Bore Diameter (D)		75 mm
Outside Diameter (D)		130 mm
Width (B)		41.3 mm
Basic Dynamic Load Rating, Radial (Cr)		88,000 N
Basic Static Load Rating, Radial (C0R)		85,000 N
Operating Temperature Min. (Tmin)		-20 °C
Limiting Speed (Ng)		2,900 1/min
Operating Temperature Max. (Tmax)		100 °C
Caliber Diameter Outer Ring (D2)		115.5 mm
Fatigue Load Limit, Radial (Cur)		4,350 N
Minimum Diameter Shaft Shoulder (Da Min)		84 mm
Shoulder Diameter Inner Ring (D1)		92.1 mm
Maximum Diameter Of Housing Shoulder (Da Max)		121 mm
Minimum Chamfer Dimension (Rmin)		1.5 mm
Maximum Fillet Radius (Ra Max)		1.5 mm
Shoulder Diameter Outer Ring (D1)		112.6 mm
Contact Angle (Α)		25 °
Distance Between The Apexes Of The Pressure Cones (A)		65.2 mm