Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications16 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | 3203 | |
| Bore diameter | d | 17 mm |
| Outside diameter | D | 40 mm |
| Width | B | 17.5 mm |
| Basic dynamic load rating | C | 15.5 kN |
| Basic static load rating | C0 | 9.5 kN |
| Fatigue load limit | Pu | 0.66 kN |
| Reference speed | nref | 16600 r/min |
| Limiting speed | nG | 19400 r/min |
| Mass | ≈m | 0.09 kg |
| Precision class | P6 — Class 6 (ISO 492:2023) | |
| Sealing | Without — Not sealed | |
| Cage | TVH — Solid cage made of glass-fiber reinforced polyamide PA66 | |
| Lubricant | Without — Bearing not greased | |
| Minimum operating temperature | Tmin | -30 °C |
| Maximum operating temperature | Tmax | 120 °C |
Precision classification2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial ball bearing tolerance equivalent | ABEC 3Derived from ISO P6; not a direct ABEC marking | |
| Mapping basis | ISO 492 / ANSI/ABMA 20The original manufacturer tolerance remains the controlling value. |
Product characteristics8 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Design variant | B | Bearing without filling slot |
| Changed internal design | D | |
| Type of Seal | Without | Not sealed |
| Cage | TVH | Solid cage made of glass-fiber reinforced polyamide PA66 |
| Tolerance class | P6 | Class 6 (ISO 492:2023) |
| Dimensional / heat stabilization | SN | Rings dimensional stabilized up to 120° |
| Lubricant | Without | Bearing not greased |
| Axial internal clearance | CN | Group N (CN) |
Main Dimensions & Performance Data9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 17 mm0.669 in |
| Outside diameter | D | 40 mm1.575 in |
| Width | B | 17.5 mm0.689 in |
| Basic dynamic load rating, radial | Cr | 15,500 N3,484.712 lbf |
| Basic static load rating, radial | C0r | 9,500 N2,135.791 lbf |
| Fatigue load limit, radial | Cur | 660 N148.381 lbf |
| Limiting speed | nG | 19,400 1/min |
| Reference speed | nϑr | 16,600 1/min |
| Mass | ≈m | 0.09 kg0.198 lbs |
Mounting dimensions3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 21.2 mm0.835 in |
| Maximum diameter of housing shoulder | Da max | 35.8 mm1.409 in |
| Maximum fillet radius | ra max | 0.6 mm0.024 in |
Dimensions7 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum chamfer dimension | rmin | 0.6 mm0.024 in |
| Shoulder diameter outer ring | D1 | 33.94 mm1.336 in |
| Caliber diameter outer ring | D2 | 36.09 mm1.421 in |
| Shoulder diameter inner ring | d1 | 25.8 mm1.016 in |
| Caliber diamter inner ring | d2 | 24.43 mm0.962 in |
| Distance between the apexes of the pressure cones | a | 23.5 mm0.925 in |
| Contact angle | α | 30 ° |
Temperature range2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Operating temperature min. | Tmin | -30 °C-22 °F |
| Operating temperature max. | Tmax | 120 °C248 °F |
Capabilities & suitability6 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial load capacity | Yes | |
| Axial load capacity in one direction | Yes | |
| Axial load capacity in both directions | Yes | |
| Suitable for grease lubrication | Yes | |
| Suitable for oil lubrication | Yes | |
| Unsealed design | Yes |
Manufacturer Identity10 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 360684 | |
| Brand | FAG | |
| Base Type | 3203 | |
| Old Designation | ["3203-BD-TVH"] | |
| X Life Marking | XL | |
| SAP material number | 0637149490000 | |
| Base product | 2305080302 | |
| Bearing X designation | 3203-BD-XL-TVH | |
| Mounting Manager ID | 3203-BD-XL-TVH | |
| Grease application ID | 3203-BD-XL-TVH |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Angular contact ball bearing 32..-BD-XL-TVH, double row, X-life, plastic cage | |
| Short Description | Angular contact ball bearing |
Technical Data20 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter (D) | 17 mm | |
| Outside Diameter (D) | 40 mm | |
| Width (B) | 17.5 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 15,500 N | |
| Basic Static Load Rating, Radial (C0R) | 9,500 N | |
| Operating Temperature Min. (Tmin) | -30 °C | |
| Limiting Speed (Ng) | 19,400 1/min | |
| Operating Temperature Max. (Tmax) | 120 °C | |
| Reference Speed (Nϑr) | 16,600 1/min | |
| Caliber Diameter Outer Ring (D2) | 36.09 mm | |
| Fatigue Load Limit, Radial (Cur) | 660 N | |
| Minimum Diameter Shaft Shoulder (Da Min) | 21.2 mm | |
| Shoulder Diameter Inner Ring (D1) | 25.8 mm | |
| Maximum Diameter Of Housing Shoulder (Da Max) | 35.8 mm | |
| Minimum Chamfer Dimension (Rmin) | 0.6 mm | |
| Caliber Diameter Inner Ring (D1) | 24.43 mm | |
| Maximum Fillet Radius (Ra Max) | 0.6 mm | |
| Shoulder Diameter Outer Ring (D1) | 33.94 mm | |
| Contact Angle (Α) | 30 ° | |
| Distance Between The Apexes Of The Pressure Cones (A) | 23.5 mm |
