Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications16 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | 3201 | |
| Bore diameter | d | 12 mm |
| Outside diameter | D | 32 mm |
| Width | B | 15.9 mm |
| Basic dynamic load rating | C | 10.5 kN |
| Basic static load rating | C0 | 5.8 kN |
| Fatigue load limit | Pu | 0.3 kN |
| Reference speed | nref | 20000 r/min |
| Limiting speed | nG | 24600 r/min |
| Mass | ≈m | 0.054 kg |
| Precision class | PN — Normal (ISO 492:2023) | |
| Sealing | Without — Not sealed | |
| Cage | TVH — Solid cage made of glass-fiber reinforced polyamide PA66 | |
| Lubricant | GA13 — Ball bearing and insert bearing grease | |
| Minimum operating temperature | Tmin | -20 °C |
| Maximum operating temperature | Tmax | 120 °C |
Precision classification2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial ball bearing tolerance equivalent | ABEC 1Derived from ISO Normal; not a direct ABEC marking | |
| Mapping basis | ISO 492 / ANSI/ABMA 20The original manufacturer tolerance remains the controlling value. |
Product characteristics8 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Design variant | B | Bearing without filling slot |
| Changed internal design | B | |
| Type of Seal | Without | Not sealed |
| Cage | TVH | Solid cage made of glass-fiber reinforced polyamide PA66 |
| Tolerance class | PN | Normal (ISO 492:2023) |
| Dimensional / heat stabilization | SN | Rings dimensional stabilized up to 120° |
| Lubricant | GA13 | Ball bearing and insert bearing grease |
| Axial internal clearance | C3 | Group 3 (C3), bigger than CN |
Main Dimensions & Performance Data9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 12 mm0.472 in |
| Outside diameter | D | 32 mm1.26 in |
| Width | B | 15.9 mm0.626 in |
| Basic dynamic load rating, radial | Cr | 10,500 N2,360.612 lbf |
| Basic static load rating, radial | C0r | 5,800 N1,303.957 lbf |
| Fatigue load limit, radial | Cur | 300 N67.446 lbf |
| Limiting speed | nG | 24,600 1/min |
| Reference speed | nϑr | 20,000 1/min |
| Mass | ≈m | 0.054 kg0.119 lbs |
Mounting dimensions3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 16.2 mm0.638 in |
| Maximum diameter of housing shoulder | Da max | 27.8 mm1.094 in |
| Maximum fillet radius | ra max | 0.6 mm0.024 in |
Dimensions7 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum chamfer dimension | rmin | 0.6 mm0.024 in |
| Shoulder diameter outer ring | D1 | 25.99 mm1.023 in |
| Caliber diameter outer ring | D2 | 27.77 mm1.093 in |
| Shoulder diameter inner ring | d1 | 17.8 mm0.701 in |
| Caliber diamter inner ring | d2 | 17.2 mm0.677 in |
| Distance between the apexes of the pressure cones | a | 16.5 mm0.65 in |
| Contact angle | α | 25 ° |
Temperature range2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Operating temperature min. | Tmin | -20 °C-4 °F |
| Operating temperature max. | Tmax | 120 °C248 °F |
Capabilities & suitability6 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial load capacity | Yes | |
| Axial load capacity in one direction | Yes | |
| Axial load capacity in both directions | Yes | |
| Suitable for grease lubrication | Yes | |
| Suitable for oil lubrication | Yes | |
| Unsealed design | Yes |
Manufacturer Identity10 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 360763 | |
| Brand | FAG | |
| Base Type | 3201 | |
| Old Designation | ["3201BB.TVH.C3","3201-B-TVH-C3"] | |
| X Life Marking | n.r. | |
| SAP material number | 0208114110030 | |
| Base product | 2305080302 | |
| Bearing X designation | 3201-BB-TVH-C3 | |
| Mounting Manager ID | 3201-BB-TVH-C3 | |
| Grease application ID | 3201-BB-TVH-C3 |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Angular contact ball bearing 32..-B-TVH, double row, plastic cage | |
| Short Description | Angular contact ball bearing |
Technical Data20 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter (D) | 12 mm | |
| Outside Diameter (D) | 32 mm | |
| Width (B) | 15.9 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 10,500 N | |
| Basic Static Load Rating, Radial (C0R) | 5,800 N | |
| Operating Temperature Min. (Tmin) | -20 °C | |
| Limiting Speed (Ng) | 24,600 1/min | |
| Operating Temperature Max. (Tmax) | 120 °C | |
| Reference Speed (Nϑr) | 20,000 1/min | |
| Caliber Diameter Outer Ring (D2) | 27.77 mm | |
| Fatigue Load Limit, Radial (Cur) | 300 N | |
| Minimum Diameter Shaft Shoulder (Da Min) | 16.2 mm | |
| Shoulder Diameter Inner Ring (D1) | 17.8 mm | |
| Maximum Diameter Of Housing Shoulder (Da Max) | 27.8 mm | |
| Minimum Chamfer Dimension (Rmin) | 0.6 mm | |
| Caliber Diameter Inner Ring (D1) | 17.2 mm | |
| Maximum Fillet Radius (Ra Max) | 0.6 mm | |
| Shoulder Diameter Outer Ring (D1) | 25.99 mm | |
| Contact Angle (Α) | 25 ° | |
| Distance Between The Apexes Of The Pressure Cones (A) | 16.5 mm |
