Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications14 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | 24130 | |
| Bore diameter | d | 150 mm |
| Outside diameter | D | 250 mm |
| Width | B | 100 mm |
| Basic dynamic load rating | C | 1050 kN |
| Basic static load rating | C0 | 1520 kN |
| Fatigue load limit | Pu | 153 kN |
| Limiting speed | nG | 590 r/min |
| Mass | ≈m | 20 kg |
| Internal clearance | CN (Group N) — Normal internal clearance | |
| Sealing | 2VSR — Seals on both sides, high temperature | |
| Cage | JPB — Sheet metal cage | |
| Minimum operating temperature | Tmin | -30 °C |
| Maximum operating temperature | Tmax | 180 °C |
Product characteristics6 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Design | BE | With lose center lip ring |
| Bore type | Z | Cylindrical |
| Cage | JPB | Sheet metal cage |
| Radial internal clearance | CN (Group N) | Normal internal clearance |
| Relubrication feature | Standard | |
| Type of Seal | 2VSR | Seals on both sides, high temperature |
Main Dimensions & Performance Data8 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 150 mm5.906 in |
| Outside diameter | D | 250 mm9.843 in |
| Width | B | 100 mm3.937 in |
| Basic dynamic load rating, radial | Cr | 1,050,000 N236,061.151 lbf |
| Basic static load rating, radial | C0r | 1,520,000 N341,726.619 lbf |
| Fatigue load limit, radial | Cur | 153,000 N34,397.482 lbf |
| Limiting speed | nG | 590 1/min |
| Mass | ≈m | 20 kg44.092 lbs |
Mounting dimensions3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 162 mm6.378 in |
| Maximum diameter of housing shoulder | Da max | 238 mm9.37 in |
| Maximum recess radius | ra max | 2.1 mm0.083 in |
Dimensions5 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum chamfer dimension | rmin | 2.1 mm0.083 in |
| Bore diameter outer ring | D1 | 228.9 mm9.012 in |
| Raceway diameter of the inner ring | d2 | 163.1 mm6.421 in |
| Diameter lubrication hole | ds | 4.8 mm0.189 in |
| Width of lubricating groove | ns | 9.5 mm0.374 in |
Temperature range2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Operating temperature min. | Tmin | -30 °C-22 °F |
| Operating temperature max. | Tmax | 180 °C356 °F |
Calculation factors4 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Y | e | 0.37 |
| Dynamic axial load factor | Y1 | 1.83 |
| Dynamic axial load factor | Y2 | 2.72 |
| Static axial load factor | Y0 | 1.79 |
Capabilities & suitability8 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial load capacity | Yes | |
| Axial load capacity in one direction | Yes | |
| Axial load capacity in both directions | Yes | |
| Lifetimelubricationfreedomfrommaintenance | Yes | |
| Suitable for grease lubrication | Yes | |
| Sealedonbothsides | Yes | |
| Staticangularerrorandmisalignment | Yes | |
| Dynamicangularerrorandmisalignment | Yes |
Manufacturer Identity9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 387541 | |
| Brand | FAG | |
| Base Type | 24130 | |
| Old Designation | ["24130-E1-2VSR"] | |
| X Life Marking | XL | |
| SAP material number | 0755961800000 | |
| Base product | 2305091102 | |
| Mounting Manager ID | 24130-BE-XL-2VSR | |
| Grease application ID | 24130-BE-XL-2VSR |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Sealed spherical roller bearings 241..-BE-2VSR, lip seals on both sides, for continuous casting machines | |
| Short Description | Spherical Roller Bearing |
Technical Data21 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter (D) | 150 mm | |
| Outside Diamater (D) | 250 mm | |
| Total Width (B) | 100 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 1,050,000 N | |
| Basic Static Load Rating, Radial (C0R) | 1,520,000 N | |
| Diameter Lubrication Hole (Ds) | 4.8 mm | |
| Operating Temperature Min. (Tmin) | -30 °C | |
| Minimum Diameter Shaft Shoulder (Da) | 162 mm | |
| Operating Temperature Max. (Tmax) | 180 °C | |
| Limiting Speed (Limiting Spe) | 590 1/min | |
| Maximum Recess Radius (Ra Max) | 2.1 mm | |
| Maximum Diameter Of Housing Shoulder (Da) | 238 mm | |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | 0.37 | |
| Width Of Lubricating Groove (Ns) | 9.5 mm | |
| Dynamic Axial Load Factor (Y1) | 1.83 | |
| Bore Diameter Outer Ring (D1) | 228.9 mm | |
| Raceway Diameter Of The Inner Ring (D2) | 163.1 mm | |
| Minimum Chamfer Dimension (Rmin) | 2.1 mm | |
| Static Axial Load Factor (Y0) | 1.79 | |
| Dynamic Axial Load Factor (Y2) | 2.72 | |
| Fatigue Load Limit, Radial (Cur) | 153,000 N |
