Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications14 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | 24076 | |
| Bore diameter | d | 380 mm |
| Outside diameter | D | 560 mm |
| Width | B | 180 mm |
| Basic dynamic load rating | C | 3750 kN |
| Basic static load rating | C0 | 7000 kN |
| Fatigue load limit | Pu | 590 kN |
| Reference speed | nref | 530 r/min |
| Limiting speed | nG | 990 r/min |
| Mass | ≈m | 147.94 kg |
| Internal clearance | C4 (Group 4) — Internal clearance larger than C3 | |
| Cage | MB1 — Solid brass cage | |
| Minimum operating temperature | Tmin | -30 °C |
| Maximum operating temperature | Tmax | 200 °C |
Product characteristics5 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Design | BEA | With lose center lip ring |
| Bore type | K30 | Tapered, taper 1:30 |
| Cage | MB1 | Solid brass cage |
| Radial internal clearance | C4 (Group 4) | Internal clearance larger than C3 |
| Relubrication feature | Standard |
Main Dimensions & Performance Data9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 380 mm14.961 in |
| Outside diameter | D | 560 mm22.047 in |
| Width | B | 180 mm7.087 in |
| Basic dynamic load rating, radial | Cr | 3,750,000 N843,075.54 lbf |
| Basic static load rating, radial | C0r | 7,000,000 N1,573,741.007 lbf |
| Fatigue load limit, radial | Cur | 590,000 N132,643.885 lbf |
| Limiting speed | nG | 990 1/min |
| Reference speed | nϑr | 530 1/min |
| Mass | ≈m | 147.94 kg326.151 lbs |
Mounting dimensions3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 398 mm15.669 in |
| Maximum diameter of housing shoulder | Da max | 542 mm21.339 in |
| Maximum recess radius | ra max | 4 mm0.157 in |
Dimensions4 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum chamfer dimension | rmin | 5 mm0.197 in |
| Bore diameter outer ring | D1 | 497.9 mm19.602 in |
| Diameter lubrication hole | ds | 9.5 mm0.374 in |
| Width of lubricating groove | ns | 17.7 mm0.697 in |
Temperature range2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Operating temperature min. | Tmin | -30 °C-22 °F |
| Operating temperature max. | Tmax | 200 °C392 °F |
Calculation factors4 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Y | e | 0.29 |
| Dynamic axial load factor | Y1 | 2.33 |
| Dynamic axial load factor | Y2 | 3.47 |
| Static axial load factor | Y0 | 2.28 |
Capabilities & suitability9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial load capacity | Yes | |
| Axial load capacity in one direction | Yes | |
| Axial load capacity in both directions | Yes | |
| Suitable for grease lubrication | Yes | |
| Suitable for oil lubrication | Yes | |
| Unsealed design | Yes | |
| Largebearing | Yes | |
| Staticangularerrorandmisalignment | Yes | |
| Dynamicangularerrorandmisalignment | Yes |
Manufacturer Identity7 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 389460 | |
| Brand | FAG | |
| Base Type | 24076 | |
| Old Designation | ["24076-E1A-K30-MB1-C4","24076-B-K30-MB-C4"] | |
| X Life Marking | XL | |
| SAP material number | 0836922740040 | |
| Base product | 2305091122 |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Spherical roller bearings 240..-BEA-K30, main dimensions to DIN 635-2, with tapered bore, taper 1:30 | |
| Short Description | Spherical Roller Bearing |
Additional information1 parameter
| Parameter | Symbol | Value |
|---|---|---|
| Withdrawal sleeve | AH24076-H |
Technical Data21 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter (D) | 380 mm | |
| Outside Diamater (D) | 560 mm | |
| Total Width (B) | 180 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 3,750,000 N | |
| Basic Static Load Rating, Radial (C0R) | 7,000,000 N | |
| Diameter Lubrication Hole (Ds) | 9.5 mm | |
| Operating Temperature Min. (Tmin) | -30 °C | |
| Minimum Diameter Shaft Shoulder (Da) | 398 mm | |
| Operating Temperature Max. (Tmax) | 200 °C | |
| Limiting Speed (Limiting Spe) | 990 1/min | |
| Reference Speed (Nϑr) | 530 1/min | |
| Maximum Recess Radius (Ra Max) | 4 mm | |
| Maximum Diameter Of Housing Shoulder (Da) | 542 mm | |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | 0.29 | |
| Width Of Lubricating Groove (Ns) | 17.7 mm | |
| Dynamic Axial Load Factor (Y1) | 2.33 | |
| Bore Diameter Outer Ring (D1) | 497.9 mm | |
| Minimum Chamfer Dimension (Rmin) | 5 mm | |
| Static Axial Load Factor (Y0) | 2.28 | |
| Dynamic Axial Load Factor (Y2) | 3.47 | |
| Fatigue Load Limit, Radial (Cur) | 590,000 N |
