Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications13 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | 23340 | |
| Bore diameter | d | 200 mm |
| Outside diameter | D | 420 mm |
| Width | B | 165 mm |
| Basic dynamic load rating | C | 2950 kN |
| Basic static load rating | C0 | 3700 kN |
| Fatigue load limit | Pu | 270 kN |
| Limiting speed | nG | 1600 r/min |
| Mass | ≈m | 112.6 kg |
| Internal clearance | C3 (Group 3) — Internal clearance larger than CN | |
| Cage | MA1 — Solid brass cage | |
| Minimum operating temperature | Tmin | -30 °C |
| Maximum operating temperature | Tmax | 200 °C |
Product characteristics9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Design | BEA | With lose center lip ring |
| Bore type | Z | Cylindrical |
| Cage | MA1 | Solid brass cage |
| Radial internal clearance | C3 (Group 3) | Internal clearance larger than CN |
| Relubrication feature | Standard | |
| Locating feature, bearing outer ring | Without | |
| Handling thread holes | Without | |
| Special material | Standard | |
| Spherical roller bearing for vibrating screens | T41A | For vibrating screens |
Main Dimensions & Performance Data8 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 200 mm7.874 in |
| Outside diameter | D | 420 mm16.535 in |
| Width | B | 165 mm6.496 in |
| Basic dynamic load rating, radial | Cr | 2,950,000 N663,219.424 lbf |
| Basic static load rating, radial | C0r | 3,700,000 N831,834.532 lbf |
| Fatigue load limit, radial | Cur | 270,000 N60,701.439 lbf |
| Limiting speed | nG | 1,600 1/min |
| Mass | ≈m | 112.6 kg248.24 lbs |
Mounting dimensions3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 220 mm8.661 in |
| Maximum diameter of housing shoulder | Da max | 400 mm15.748 in |
| Maximum recess radius | ra max | 4 mm0.157 in |
Dimensions4 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum chamfer dimension | rmin | 5 mm0.197 in |
| Bore diameter outer ring | D1 | 348.6 mm13.724 in |
| Diameter lubrication hole | ds | 9.5 mm0.374 in |
| Width of lubricating groove | ns | 17.7 mm0.697 in |
Temperature range2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Operating temperature min. | Tmin | -30 °C-22 °F |
| Operating temperature max. | Tmax | 200 °C392 °F |
Calculation factors4 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Y | e | 0.41 |
| Dynamic axial load factor | Y1 | 1.64 |
| Dynamic axial load factor | Y2 | 2.44 |
| Static axial load factor | Y0 | 1.6 |
Capabilities & suitability9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial load capacity | Yes | |
| Axial load capacity in one direction | Yes | |
| Axial load capacity in both directions | Yes | |
| Suitable for grease lubrication | Yes | |
| Suitable for oil lubrication | Yes | |
| Unsealed design | Yes | |
| Largebearing | Yes | |
| Staticangularerrorandmisalignment | Yes | |
| Dynamicangularerrorandmisalignment | Yes |
Manufacturer Identity6 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 1733508 | |
| Brand | FAG | |
| Base Type | 23340 | |
| X Life Marking | XL | |
| SAP material number | 0955627530030 | |
| Base product | 2305091122 |
Product Identity1 parameter
| Parameter | Symbol | Value |
|---|---|---|
| Short Description | Spherical Roller Bearing |
Technical Data20 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter (D) | 200 mm | |
| Outside Diamater (D) | 420 mm | |
| Total Width (B) | 165 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 2,950,000 N | |
| Basic Static Load Rating, Radial (C0R) | 3,700,000 N | |
| Diameter Lubrication Hole (Ds) | 9.5 mm | |
| Operating Temperature Min. (Tmin) | -30 °C | |
| Minimum Diameter Shaft Shoulder (Da) | 220 mm | |
| Operating Temperature Max. (Tmax) | 200 °C | |
| Limiting Speed (Limiting Spe) | 1,600 1/min | |
| Maximum Recess Radius (Ra Max) | 4 mm | |
| Maximum Diameter Of Housing Shoulder (Da) | 400 mm | |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | 0.41 | |
| Width Of Lubricating Groove (Ns) | 17.7 mm | |
| Dynamic Axial Load Factor (Y1) | 1.64 | |
| Bore Diameter Outer Ring (D1) | 348.6 mm | |
| Minimum Chamfer Dimension (Rmin) | 5 mm | |
| Static Axial Load Factor (Y0) | 1.6 | |
| Dynamic Axial Load Factor (Y2) | 2.44 | |
| Fatigue Load Limit, Radial (Cur) | 270,000 N |
