Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications14 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | 23160 | |
| Bore diameter | d | 300 mm |
| Outside diameter | D | 500 mm |
| Width | B | 160 mm |
| Basic dynamic load rating | C | 3250 kN |
| Basic static load rating | C0 | 4950 kN |
| Fatigue load limit | Pu | 375 kN |
| Reference speed | nref | 720 r/min |
| Limiting speed | nG | 1300 r/min |
| Mass | ≈m | 121.095 kg |
| Internal clearance | CN (Group N) — Normal internal clearance | |
| Cage | MB1 — Solid brass cage | |
| Minimum operating temperature | Tmin | -30 °C |
| Maximum operating temperature | Tmax | 200 °C |
Product characteristics5 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Design | BEA | With lose center lip ring |
| Bore type | K | Tapered, taper 1:12 |
| Cage | MB1 | Solid brass cage |
| Radial internal clearance | CN (Group N) | Normal internal clearance |
| Relubrication feature | Standard |
Main Dimensions & Performance Data9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 300 mm11.811 in |
| Outside diameter | D | 500 mm19.685 in |
| Width | B | 160 mm6.299 in |
| Basic dynamic load rating, radial | Cr | 3,250,000 N730,665.468 lbf |
| Basic static load rating, radial | C0r | 4,950,000 N1,112,859.712 lbf |
| Fatigue load limit, radial | Cur | 375,000 N84,307.554 lbf |
| Limiting speed | nG | 1,300 1/min |
| Reference speed | nϑr | 720 1/min |
| Mass | ≈m | 121.095 kg266.968 lbs |
Mounting dimensions6 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 320 mm12.598 in |
| Maximum diameter of housing shoulder | Da max | 480 mm18.898 in |
| Maximum recess radius | ra max | 4 mm0.157 in |
| Maximum diameter of shaft shoulder | da max | 347 mm13.661 in |
| Minimum cavity diameter of the sleeve | db min | 318 mm12.52 in |
| Minimum cavity width of the sleeve | Ba min | 12 mm0.472 in |
Dimensions4 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum chamfer dimension | rmin | 5 mm0.197 in |
| Bore diameter outer ring | D1 | 436.8 mm17.197 in |
| Diameter lubrication hole | ds | 9.5 mm0.374 in |
| Width of lubricating groove | ns | 17.7 mm0.697 in |
Temperature range2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Operating temperature min. | Tmin | -30 °C-22 °F |
| Operating temperature max. | Tmax | 200 °C392 °F |
Calculation factors4 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Y | e | 0.31 |
| Dynamic axial load factor | Y1 | 2.18 |
| Dynamic axial load factor | Y2 | 3.24 |
| Static axial load factor | Y0 | 2.13 |
Capabilities & suitability9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial load capacity | Yes | |
| Axial load capacity in one direction | Yes | |
| Axial load capacity in both directions | Yes | |
| Suitable for grease lubrication | Yes | |
| Suitable for oil lubrication | Yes | |
| Unsealed design | Yes | |
| Largebearing | Yes | |
| Staticangularerrorandmisalignment | Yes | |
| Dynamicangularerrorandmisalignment | Yes |
Manufacturer Identity10 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 389291 | |
| Brand | FAG | |
| Base Type | 23160 | |
| Old Designation | ["23160-E1A-K-MB1","23160-B-K-MB"] | |
| X Life Marking | XL | |
| SAP material number | 0738354980000 | |
| Base product | 2305091122 | |
| Bearing X designation | 23160-BEA-XL-K-MB1 | |
| Mounting Manager ID | 23160-BEA-XL-K-MB1 | |
| Grease application ID | 23160-BEA-XL-K-MB1 |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Spherical roller bearing 231..-BEA-XL-K-MB1, symmetric 2 outer ribs with rib washer | |
| Short Description | Spherical Roller Bearing |
Additional information2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Adapter sleeve | H3160 | |
| Withdrawal sleeve | AH3160G |
Technical Data24 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter (D) | 300 mm | |
| Outside Diamater (D) | 500 mm | |
| Total Width (B) | 160 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 3,250,000 N | |
| Basic Static Load Rating, Radial (C0R) | 4,950,000 N | |
| Diameter Lubrication Hole (Ds) | 9.5 mm | |
| Operating Temperature Min. (Tmin) | -30 °C | |
| Minimum Diameter Shaft Shoulder (Da) | 320 mm | |
| Operating Temperature Max. (Tmax) | 200 °C | |
| Limiting Speed (Limiting Spe) | 1,300 1/min | |
| Reference Speed (Nϑr) | 720 1/min | |
| Maximum Recess Radius (Ra Max) | 4 mm | |
| Maximum Diameter Of Housing Shoulder (Da) | 480 mm | |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | 0.31 | |
| Width Of Lubricating Groove (Ns) | 17.7 mm | |
| Dynamic Axial Load Factor (Y1) | 2.18 | |
| Bore Diameter Outer Ring (D1) | 436.8 mm | |
| Maximum Diameter Of Shaft Shoulder (Da Max) | 347 mm | |
| Minimum Chamfer Dimension (Rmin) | 5 mm | |
| Static Axial Load Factor (Y0) | 2.13 | |
| Dynamic Axial Load Factor (Y2) | 3.24 | |
| Minimum Cavity Width Of The Sleeve (Ba Min) | 12 mm | |
| Minimum Cavity Diameter Of The Sleeve (Db Min) | 318 mm | |
| Fatigue Load Limit, Radial (Cur) | 375,000 N |
