Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications14 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | 23092 | |
| Bore diameter | d | 460 mm |
| Outside diameter | D | 680 mm |
| Width | B | 163 mm |
| Basic dynamic load rating | C | 4300 kN |
| Basic static load rating | C0 | 7500 kN |
| Fatigue load limit | Pu | 610 kN |
| Reference speed | nref | 580 r/min |
| Limiting speed | nG | 980 r/min |
| Mass | ≈m | 196.5 kg |
| Internal clearance | C4 (Group 4) — Internal clearance larger than C3 | |
| Cage | MB1 — Solid brass cage | |
| Minimum operating temperature | Tmin | -30 °C |
| Maximum operating temperature | Tmax | 200 °C |
Product characteristics5 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Design | BEA | With lose center lip ring |
| Bore type | K | Tapered, taper 1:12 |
| Cage | MB1 | Solid brass cage |
| Radial internal clearance | C4 (Group 4) | Internal clearance larger than C3 |
| Relubrication feature | Standard |
Main Dimensions & Performance Data9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 460 mm18.11 in |
| Outside diameter | D | 680 mm26.772 in |
| Width | B | 163 mm6.417 in |
| Basic dynamic load rating, radial | Cr | 4,300,000 N966,726.619 lbf |
| Basic static load rating, radial | C0r | 7,500,000 N1,686,151.079 lbf |
| Fatigue load limit, radial | Cur | 610,000 N137,140.288 lbf |
| Limiting speed | nG | 980 1/min |
| Reference speed | nϑr | 580 1/min |
| Mass | ≈m | 196.5 kg433.208 lbs |
Mounting dimensions6 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 483 mm19.016 in |
| Maximum diameter of housing shoulder | Da max | 657 mm25.866 in |
| Maximum recess radius | ra max | 5 mm0.197 in |
| Maximum diameter of shaft shoulder | da max | 509 mm20.039 in |
| Minimum cavity diameter of the sleeve | db min | 478 mm18.819 in |
| Minimum cavity width of the sleeve | Ba min | 17 mm0.669 in |
Dimensions4 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum chamfer dimension | rmin | 6 mm0.236 in |
| Bore diameter outer ring | D1 | 616.7 mm24.28 in |
| Diameter lubrication hole | ds | 12.5 mm0.492 in |
| Width of lubricating groove | ns | 23.5 mm0.925 in |
Temperature range2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Operating temperature min. | Tmin | -30 °C-22 °F |
| Operating temperature max. | Tmax | 200 °C392 °F |
Calculation factors4 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Y | e | 0.21 |
| Dynamic axial load factor | Y1 | 3.17 |
| Dynamic axial load factor | Y2 | 4.72 |
| Static axial load factor | Y0 | 3.1 |
Capabilities & suitability9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial load capacity | Yes | |
| Axial load capacity in one direction | Yes | |
| Axial load capacity in both directions | Yes | |
| Suitable for grease lubrication | Yes | |
| Suitable for oil lubrication | Yes | |
| Unsealed design | Yes | |
| Largebearing | Yes | |
| Staticangularerrorandmisalignment | Yes | |
| Dynamicangularerrorandmisalignment | Yes |
Manufacturer Identity6 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 391567 | |
| Brand | FAG | |
| Base Type | 23092 | |
| X Life Marking | XL | |
| SAP material number | 0923276300040 | |
| Base product | 2305091122 |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Spherical roller bearing 230..-BEA-XL-K-MB1, symmetric 2 outer ribs with rib washer | |
| Short Description | Spherical Roller Bearing |
Additional information2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Adapter sleeve | H3092-HG | |
| Withdrawal sleeve | AHX3092G-H |
Technical Data24 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter (D) | 460 mm | |
| Outside Diamater (D) | 680 mm | |
| Total Width (B) | 163 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 4,300,000 N | |
| Basic Static Load Rating, Radial (C0R) | 7,500,000 N | |
| Diameter Lubrication Hole (Ds) | 12.5 mm | |
| Operating Temperature Min. (Tmin) | -30 °C | |
| Minimum Diameter Shaft Shoulder (Da) | 483 mm | |
| Operating Temperature Max. (Tmax) | 200 °C | |
| Limiting Speed (Limiting Spe) | 980 1/min | |
| Reference Speed (Nϑr) | 580 1/min | |
| Maximum Recess Radius (Ra Max) | 5 mm | |
| Maximum Diameter Of Housing Shoulder (Da) | 657 mm | |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | 0.21 | |
| Width Of Lubricating Groove (Ns) | 23.5 mm | |
| Dynamic Axial Load Factor (Y1) | 3.17 | |
| Bore Diameter Outer Ring (D1) | 616.7 mm | |
| Maximum Diameter Of Shaft Shoulder (Da Max) | 509 mm | |
| Minimum Chamfer Dimension (Rmin) | 6 mm | |
| Static Axial Load Factor (Y0) | 3.1 | |
| Dynamic Axial Load Factor (Y2) | 4.72 | |
| Minimum Cavity Width Of The Sleeve (Ba Min) | 17 mm | |
| Minimum Cavity Diameter Of The Sleeve (Db Min) | 478 mm | |
| Fatigue Load Limit, Radial (Cur) | 610,000 N |