Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications14 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | 23036 | |
| Bore diameter | d | 180 mm |
| Outside diameter | D | 280 mm |
| Width | B | 74 mm |
| Basic dynamic load rating | C | 1040 kN |
| Basic static load rating | C0 | 1450 kN |
| Fatigue load limit | Pu | 173 kN |
| Reference speed | nref | 1760 r/min |
| Limiting speed | nG | 2600 r/min |
| Mass | ≈m | 15.962 kg |
| Internal clearance | C4 (Group 4) — Internal clearance larger than C3 | |
| Cage | M — Brass Cage | |
| Minimum operating temperature | Tmin | -30 °C |
| Maximum operating temperature | Tmax | 200 °C |
Product characteristics6 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Design | E1A | Without central rip |
| Bore type | K | Tapered, taper 1:12 |
| Cage | M | Brass Cage |
| Radial internal clearance | C4 (Group 4) | Internal clearance larger than C3 |
| Relubrication feature | Standard | |
| Special material | Standard |
Main Dimensions & Performance Data9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 180 mm7.087 in |
| Outside diameter | D | 280 mm11.024 in |
| Width | B | 74 mm2.913 in |
| Basic dynamic load rating, radial | Cr | 1,040,000 N233,812.95 lbf |
| Basic static load rating, radial | C0r | 1,450,000 N325,989.209 lbf |
| Fatigue load limit, radial | Cur | 173,000 N38,893.885 lbf |
| Limiting speed | nG | 2,600 1/min |
| Reference speed | nϑr | 1,760 1/min |
| Mass | ≈m | 15.962 kg35.19 lbs |
Mounting dimensions6 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 190.2 mm7.488 in |
| Maximum diameter of housing shoulder | Da max | 269.8 mm10.622 in |
| Maximum recess radius | ra max | 2.1 mm0.083 in |
| Maximum diameter of shaft shoulder | da max | 201 mm7.913 in |
| Minimum cavity diameter of the sleeve | db min | 189 mm7.441 in |
| Minimum cavity width of the sleeve | Ba min | 8 mm0.315 in |
Dimensions4 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum chamfer dimension | rmin | 2.1 mm0.083 in |
| Bore diameter outer ring | D1 | 254.3 mm10.012 in |
| Diameter lubrication hole | ds | 8 mm0.315 in |
| Width of lubricating groove | ns | 15 mm0.591 in |
Temperature range2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Operating temperature min. | Tmin | -30 °C-22 °F |
| Operating temperature max. | Tmax | 200 °C392 °F |
Calculation factors4 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Y | e | 0.23 |
| Dynamic axial load factor | Y1 | 2.9 |
| Dynamic axial load factor | Y2 | 4.31 |
| Static axial load factor | Y0 | 2.83 |
Capabilities & suitability8 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial load capacity | Yes | |
| Axial load capacity in one direction | Yes | |
| Axial load capacity in both directions | Yes | |
| Suitable for grease lubrication | Yes | |
| Suitable for oil lubrication | Yes | |
| Unsealed design | Yes | |
| Staticangularerrorandmisalignment | Yes | |
| Dynamicangularerrorandmisalignment | Yes |
Manufacturer Identity7 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 388865 | |
| Brand | FAG | |
| Base Type | 23036 | |
| Old Designation | ["23036-E1A-K-M-C4","23036E1AK.M.C4"] | |
| X Life Marking | XL | |
| SAP material number | 0190258230040 | |
| Base product | 2305091121 |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Spherical roller bearings 230..-E1A-K, main dimensions to DIN 635-2, with tapered bore, taper 1:12 | |
| Short Description | Spherical Roller Bearing |
Additional information2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Adapter sleeve | H3036 | |
| Withdrawal sleeve | AH3036 |
Technical Data24 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter (D) | 180 mm | |
| Outside Diamater (D) | 280 mm | |
| Total Width (B) | 74 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 1,040,000 N | |
| Basic Static Load Rating, Radial (C0R) | 1,450,000 N | |
| Diameter Lubrication Hole (Ds) | 8 mm | |
| Operating Temperature Min. (Tmin) | -30 °C | |
| Minimum Diameter Shaft Shoulder (Da) | 190.2 mm | |
| Operating Temperature Max. (Tmax) | 200 °C | |
| Limiting Speed (Limiting Spe) | 2,600 1/min | |
| Reference Speed (Nϑr) | 1,760 1/min | |
| Maximum Recess Radius (Ra Max) | 2.1 mm | |
| Maximum Diameter Of Housing Shoulder (Da) | 269.8 mm | |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | 0.23 | |
| Width Of Lubricating Groove (Ns) | 15 mm | |
| Dynamic Axial Load Factor (Y1) | 2.9 | |
| Bore Diameter Outer Ring (D1) | 254.3 mm | |
| Maximum Diameter Of Shaft Shoulder (Da Max) | 201 mm | |
| Minimum Chamfer Dimension (Rmin) | 2.1 mm | |
| Static Axial Load Factor (Y0) | 2.83 | |
| Dynamic Axial Load Factor (Y2) | 4.31 | |
| Minimum Cavity Width Of The Sleeve (Ba Min) | 8 mm | |
| Minimum Cavity Diameter Of The Sleeve (Db Min) | 189 mm | |
| Fatigue Load Limit, Radial (Cur) | 173,000 N |
