Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications17 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | 1207 | |
| Bore diameter | d | 35 mm |
| Outside diameter | D | 72 mm |
| Width | B | 17 mm |
| Basic dynamic load rating | C | 16 kN |
| Basic static load rating | C0 | 5.1 kN |
| Fatigue load limit | Pu | 0.325 kN |
| Reference speed | nref | 9800 r/min |
| Limiting speed | nG | 11600 r/min |
| Mass | ≈m | 0.315 kg |
| Precision class | PN — Normal (ISO 492:2023) | |
| Internal clearance | C3 (Group 3) — Internal clearance larger than CN | |
| Sealing | Without — Not sealed | |
| Cage | TVH — Solid cage made of glass-fiber reinforced polyamide PA66 | |
| Lubricant | Without — Bearing not greased | |
| Minimum operating temperature | Tmin | -30 °C |
| Maximum operating temperature | Tmax | 120 °C |
Precision classification2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial ball bearing tolerance equivalent | ABEC 1Derived from ISO Normal; not a direct ABEC marking | |
| Mapping basis | ISO 492 / ANSI/ABMA 20The original manufacturer tolerance remains the controlling value. |
Product characteristics6 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore type | K | Tapered, taper 1:12 |
| Type of Seal | Without | Not sealed |
| Cage | TVH | Solid cage made of glass-fiber reinforced polyamide PA66 |
| Tolerance class | PN | Normal (ISO 492:2023) |
| Radial internal clearance | C3 (Group 3) | Internal clearance larger than CN |
| Lubricant | Without | Bearing not greased |
Main Dimensions & Performance Data9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 35 mm1.378 in |
| Outside diameter | D | 72 mm2.835 in |
| Width | B | 17 mm0.669 in |
| Basic dynamic load rating, radial | Cr | 16,000 N3,597.122 lbf |
| Basic static load rating, radial | C0r | 5,100 N1,146.583 lbf |
| Fatigue load limit, radial | Cur | 325 N73.067 lbf |
| Limiting speed | nG | 11,600 1/min |
| Reference speed | nϑr | 9,800 1/min |
| Mass | ≈m | 0.315 kg0.694 lbs |
Mounting dimensions6 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 42 mm1.654 in |
| Maximum diameter shaft shoulder | da max | 45 mm1.772 in |
| Maximum diameter of housing shoulder | Da max | 65 mm2.559 in |
| Minimum cavity diameter of the sleeve | db min | 38 mm1.496 in |
| Minimum cavity width of the sleeve | Ba min | 5 mm0.197 in |
| Maximum fillet radius | ra max | 1 mm0.039 in |
Dimensions3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Minimum chamfer dimension | rmin | 1.1 mm0.043 in |
| Shoulder diameter outer ring | D1 | 59.08 mm2.326 in |
| Shoulder diameter inner ring | d1 | 47.7 mm1.878 in |
Temperature range2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Operating temperature min. | Tmin | -30 °C-22 °F |
| Operating temperature max. | Tmax | 120 °C248 °F |
Calculation factors4 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Y | e | 0.22 |
| Dynamic axial load factor | Y1 | 2.81 |
| Dynamic axial load factor | Y2 | 4.35 |
| Static axial load factor | Y0 | 2.94 |
Capabilities & suitability8 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Radial load capacity | Yes | |
| Axial load capacity in one direction | Yes | |
| Axial load capacity in both directions | Yes | |
| Suitable for grease lubrication | Yes | |
| Suitable for oil lubrication | Yes | |
| Unsealed design | Yes | |
| Staticangularerrorandmisalignment | Yes | |
| Dynamicangularerrorandmisalignment | Yes |
Manufacturer Identity10 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 365770 | |
| Brand | FAG | |
| Base Type | 1207 | |
| Old Designation | ["1207K.TV.C3"] | |
| X Life Marking | n.r. | |
| SAP material number | 0389029400030 | |
| Base product | 2305080601 | |
| Bearing X designation | 1207-K-TVH-C3 | |
| Mounting Manager ID | 1207-K-TVH-C3 | |
| Grease application ID | 1207-K-TVH-C3 |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Self-aligning ball bearing 12..-K-TVH, tapered bore taper 1:12, plastic cage | |
| Short Description | Self-aligning ball bearing |
Additional information1 parameter
| Parameter | Symbol | Value |
|---|---|---|
| Adapter sleeve | H207 |
Technical Data23 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter (D) | 35 mm | |
| Outside Diameter (D) | 72 mm | |
| Width (B) | 17 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 16,000 N | |
| Basic Static Load Rating, Radial (C0R) | 5,100 N | |
| Operating Temperature Min. (Tmin) | -30 °C | |
| Limiting Speed (Ng) | 11,600 1/min | |
| Operating Temperature Max. (Tmax) | 120 °C | |
| Reference Speed (Nϑr) | 9,800 1/min | |
| Fatigue Load Limit, Radial (Cur) | 325 N | |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | 0.22 | |
| Maximum Diameter Of Shaft Shoulder (Da Max) | 45 mm | |
| Minimum Diameter Of Shaft Shoulder (Db Min) | 38 mm | |
| Minimum Diameter Shaft Shoulder (Da Min) | 42 mm | |
| Shoulder Diameter Inner Ring (D1) | 47.7 mm | |
| Dynamic Axial Load Factor (Y1) | 2.81 | |
| Maximum Diameter Of Housing Shoulder (Da Max) | 65 mm | |
| Minimum Chamfer Dimension (Rmin) | 1.1 mm | |
| Maximum Fillet Radius (Ra Max) | 1 mm | |
| Shoulder Diameter Outer Ring (D1) | 59.08 mm | |
| Dynamic Axial Load Factor (Y2) | 4.35 | |
| Minimum Cavity Width Of The Sleeve (Ba Min) | 5 mm | |
| Static Axial Load Factor (Y0) | 2.94 |
