Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered NUP2330EM. This table explores the base group NUP2330; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“NUP2330” across 3 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAGNUP2330-E-XL-M1150 × 320 × 108 mm | NSKNUP2330EM150 × 320 × 108 mm | KOYONUP2330150 × 320 × 108 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | FAG | NSK | KOYO |
| Designation | NUP2330-E-XL-M1 | NUP2330EM | NUP2330 |
| Product family | — | Cylindrical roller bearing | Single-row / NUP |
| Detailed type | Cylindrical roller bearings | Cylindrical roller bearings | Cylindrical roller bearings |
| Series | NUP2330 | — | — |
| Bore diameterd | 150 mm | 150 mm | 150 mm |
| Outside diameterD | 320 mm | 320 mm | 320 mm |
| WidthB | 108 mm | 108 mm | 108 mm |
| Basic dynamic load ratingC | 1380 kN | 1430 kN | 1270 kN |
| Basic static load ratingC0 | 1600 kN | 1600 kN | 1400 kN |
| Fatigue load limitPu | 249 kN | — | 167 kN |
| Reference speednref | 1460 r/min | — | — |
| Limiting speednG | 3650 r/min | — | 1600 r/min |
| Mass≈m | 44.7 kg | — | 46.1 kg |
| Precision class | PN — Normal (ISO 492:2023) | — | — |
| Internal clearance | CN (Group N) — Normal internal clearance | — | — |
| Cage | M1 — Two Piece Brass Cage Roller Guided | Machined brass | — |
| Minimum operating temperatureTmin | -30 °C | — | — |
| Maximum operating temperatureTmax | 150 °C | — | — |
| Boundary dimensions | |||
| Bearing widthB | — | 108 mm | — |
| Minimum bearing chamferr min. | — | 4 mm | — |
| Minimum secondary bearing chamferr1 min. | — | 4 mm | — |
| Roller inscribed circle diameterFw | — | 193 mm | — |
| Capabilities & suitability | |||
| Radial load capacity | Yes | — | — |
| Axial load capacity in one direction | Yes | — | — |
| Axial load capacity in both directions | Yes | — | — |
| Suitable for grease lubrication | Yes | — | — |
| Suitable for oil lubrication | Yes | — | — |
| Unsealed design | Yes | — | — |
| Largebearing | Yes | — | — |
| Catalogue reference mass | |||
| Approximate shared-row mass — not separately stated for each rib arrangement | — | 45.1 kg | — |
| Classification | |||
| Official Category Path | — | — | Cylindrical roller bearings - Single-row - NUP |
| Official Classification 1 | — | — | Cylindrical roller bearings / Single-row / NUP |
| Construction | |||
| Single-row construction type | — | NUP | — |
| Rib arrangement | — | Two outer-ring ribs; one integral and one loose inner-ring rib | — |
| Standard cage material | — | Machined brass | — |
| Standard cage marking | — | M | — |
| Other cage codes listed for this catalogue row | — | None listed in this row | — |
| Precision — designation omission rule | — | ISO Normal when no precision suffix is specified | — |
| Clearance identification — verify interchangeability | — | No clearance suffix shown. CN omission applies to interchangeable designs; do not infer a numerical clearance. | — |
| Optimized crowning note | — | Catalogue asterisk: optimized crowning may be available; not verified as fitted | — |
| Dimensions | |||
| Minimum chamfer dimensionrmin | 4 mm | — | — |
| Minimum chamfer dimensionrmin | 0.157 in | — | — |
| Minimum chamfer dimensionr1 min | 4 mm | — | — |
| Minimum chamfer dimensionr1 min | 0.157 in | — | — |
| Raceway diameter outer ringE | 283 mm | — | — |
| Raceway diameter outer ringE | 11.142 in | — | — |
| Raceway diameter inner ringF | 193 mm | — | — |
| Raceway diameter inner ringF | 7.598 in | — | — |
| Width of loose ribB3 | 16.5 mm | — | — |
| Width of loose ribB3 | 0.65 in | — | — |
| Load ratings — standard cage | |||
| Basic dynamic radial load ratingCr | — | 1430000 N | — |
| Basic static radial load ratingC0r | — | 1600000 N | — |
| Lubrication-qualified speed — standard cage | |||
| Thermal speed rating — oil bath | — | 2000 r/min | — |
| Mechanical limiting speed — forced oil circulation | — | 2400 r/min | — |
| Limiting speed — grease | — | 1600 r/min | — |
| Limiting speed — oil bath | — | 2000 r/min | — |
| Main Dimensions & Performance Data | |||
| Basic dynamic load rating, radialCr | 1,380,000 N | — | — |
| Basic dynamic load rating, radialCr | 310,251.799 lbf | — | — |
| Basic static load rating, radialC0r | 1,600,000 N | — | — |
| Basic static load rating, radialC0r | 359,712.23 lbf | — | — |
| Fatigue load limit, radialCur | 249,000 N | — | — |
| Fatigue load limit, radialCur | 55,980.216 lbf | — | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | 373554 | — | — |
| Official Class Key | — | — | 040-010-000 |
| Base Type | NUP2330 | — | — |
| Old Designation | ["NUP2330E.M1","NUP2330-E-M1"] | — | — |
| Gpsd Group | F01 | — | — |
| Product Line Id | 63 | — | — |
| X Life Marking | XL | — | — |
| SAP material number | 0192543770000 | — | — |
| Base product | 2305090122 | — | — |
| Bearing X designation | NUP2330-E-XL-M1 | — | — |
| Mounting Manager ID | NUP2330-E-XL-M1 | — | — |
| Grease application ID | NUP2330-E-XL-M1 | — | — |
| Mounting dimensions | |||
| Maximum rib diameter inner ringd1 | 209.5 mm | — | — |
| Maximum rib diameter inner ringd1 | 8.248 in | — | — |
| Minimum rib diameter outer ringD1 min | 269.8 mm | — | — |
| Minimum rib diameter outer ringD1 min | 10.622 in | — | — |
| Minimum diameter shaft shoulderda min | 167 mm | — | — |
| Minimum diameter shaft shoulderda min | 6.575 in | — | — |
| Minimum shaft shoulderdc min | 213 mm | — | — |
| Minimum shaft shoulderdc min | 8.386 in | — | — |
| Maximum diameter of housing shoulderDa max | 303 mm | — | — |
| Maximum diameter of housing shoulderDa max | 11.929 in | — | — |
| Maximum recess radiusra max | 3 mm | — | — |
| Maximum recess radiusra max | 0.118 in | — | — |
| Mounting dimensions — shown arrangement | |||
| Minimum shaft shoulder diameterdb min. | — | 166 mm | — |
| Maximum housing shoulder diameterDa max. | — | 304 mm | — |
| Maximum adjacent fillet radiusra max. | — | 3 mm | — |
| Maximum secondary adjacent fillet radiusrb max. | — | 3 mm | — |
| Product characteristics | |||
| DesignE | Increased Capacity Design | — | — |
| Radial internal clearanceCN (Group N) | Normal internal clearance | — | — |
| Tolerance classPN | Normal (ISO 492:2023) | — | — |
| Number of rows1 | Single-row design | — | — |
| Product Identity | |||
| Construction | Cylindrical roller bearing NUP..-E-XL-M1, with cage, single row, locating bearing, 2 ribs on outer ring, 1 rib on inner ring, rib washer internal, type NUP | — | — |
| Short Description | Cylindrical roller bearing | — | — |
| Technical Data | |||
| d | — | — | 320 mm |
| B | — | — | 108 mm |
| R(Min.) | — | — | 4 mm |
| R1(Min.) | — | — | 4 mm |
| Bore Diameter (D) | 150 mm | — | — |
| Fw | — | — | 193 mm |
| Outside Diamater (D) | 320 mm | — | — |
| Ew | — | — | - mm |
| Total Width (B) | 108 mm | — | — |
| Basic Load Ratings : Cr | — | — | 1270 kN |
| Basic Dynamic Load Rating, Radial (Cr) | 1,380,000 N | — | — |
| Basic Load Ratings : C0R | — | — | 1400 kN |
| Basic Static Load Rating, Radial (C0R) | 1,600,000 N | — | — |
| Fatigue Load Limit : Cu | — | — | 167 kN |
| Raceway Diameter Inner Ring (F) | 193 mm | — | — |
| Limiting Speeds(Grease Lub.) | — | — | 1600 min-1 |
| Operating Temperature Min. (Tmin) | -30 °C | — | — |
| Limiting Speeds(Oil Lub.) | — | — | 2300 min-1 |
| Minimum Diameter Shaft Shoulder (Da) | 167 mm | — | — |
| Sd1 | — | — | - mm |
| Width Of Loose Rib (B3) | 16.5 mm | — | — |
| B1 | — | — | - mm |
| Operating Temperature Max. (Tmax) | 150 °C | — | — |
| B2 | — | — | - mm |
| Limiting Speed (Limiting Spe) | 3,650 1/min | — | — |
| Da(Min.) | — | — | 166 mm |
| Minimum Shaft Shoulder (Dc Min) | 213 mm | — | — |
| Db(Min.) | — | — | - mm |
| Reference Speed (Nϑr) | 1,460 1/min | — | — |
| Db(Max.) | — | — | - mm |
| Maximum Recess Radius (Ra Max) | 3 mm | — | — |
| Dc(Min.) | — | — | - mm |
| Maximum Diameter Of Housing Shoulder (Da) | 303 mm | — | — |
| Dd(Min.) | — | — | - mm |
| Maximum Rib Diameter Inner Ring (D1) | 209.5 mm | — | — |
| Da(Max.) | — | — | 304 mm |
| Minimum Chamfer Dimension (R1 Min) | 4 mm | — | — |
| Minimum Rib Diameter Outer Ring (D1 Min) | 269.8 mm | — | — |
| Minimum Chamfer Dimension (Rmin) | 4 mm | — | — |
| Ra(Max.) | — | — | 3 mm |
| Raceway Diameter Outer Ring (E) | 283 mm | — | — |
| Rb(Max.) | — | — | 3 mm |
| Fatigue Load Limit, Radial (Cur) | 249,000 N | — | — |
| Mass(Refer.) | — | — | 46.1 kg |
| Temperature range | |||
| Operating temperature min.Tmin | -30 °C | — | — |
| Operating temperature min.Tmin | -22 °F | — | — |
| Operating temperature max.Tmax | 150 °C | — | — |
| Operating temperature max.Tmax | 302 °F | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.