Choose the exact products yourself
CUSTOM / 08 MAX
Custom Comparison
Search a designation, choose up to eight exact suffix variants, and build your own side-by-side technical table.
Build your own set
Choose exact variants
For an automatic one-result-per-brand view, use Same-model Comparison. This page is for deliberate manual selection.
Auto-compare NUP2330 by brand →Model matches
Select products
The first result per loaded brand is preselected. Choose up to eight exact variants and update the table.
Technical comparison
3 products side by side
A dash means that the loaded manufacturer source did not provide that field. It does not mean the feature is absent.
| Parameter | FAGNUP2330-E-XL-M1150 × 320 × 108 mm | NSKNUP2330EM150 × 320 × 108 mm | KOYONUP2330150 × 320 × 108 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | FAG | NSK | KOYO |
| Designation | NUP2330-E-XL-M1 | NUP2330EM | NUP2330 |
| Product family | — | Cylindrical roller bearing | Single-row / NUP |
| Detailed type | Cylindrical roller bearings | Cylindrical roller bearings | Cylindrical roller bearings |
| Series | NUP2330 | — | — |
| Bore diameterd | 150 mm | 150 mm | 150 mm |
| Outside diameterD | 320 mm | 320 mm | 320 mm |
| WidthB | 108 mm | 108 mm | 108 mm |
| Basic dynamic load ratingC | 1380 kN | 1430 kN | 1270 kN |
| Basic static load ratingC0 | 1600 kN | 1600 kN | 1400 kN |
| Fatigue load limitPu | 249 kN | — | 167 kN |
| Reference speednref | 1460 r/min | — | — |
| Limiting speednG | 3650 r/min | — | 1600 r/min |
| Mass≈m | 44.7 kg | — | 46.1 kg |
| Precision class | PN — Normal (ISO 492:2023) | — | — |
| Internal clearance | CN (Group N) — Normal internal clearance | — | — |
| Cage | M1 — Two Piece Brass Cage Roller Guided | Machined brass | — |
| Minimum operating temperatureTmin | -30 °C | — | — |
| Maximum operating temperatureTmax | 150 °C | — | — |
| Boundary dimensions | |||
| Bearing widthB | — | 108 mm | — |
| Minimum bearing chamferr min. | — | 4 mm | — |
| Minimum secondary bearing chamferr1 min. | — | 4 mm | — |
| Roller inscribed circle diameterFw | — | 193 mm | — |
| Capabilities & suitability | |||
| Radial load capacity | Yes | — | — |
| Axial load capacity in one direction | Yes | — | — |
| Axial load capacity in both directions | Yes | — | — |
| Suitable for grease lubrication | Yes | — | — |
| Suitable for oil lubrication | Yes | — | — |
| Unsealed design | Yes | — | — |
| Largebearing | Yes | — | — |
| Catalogue reference mass | |||
| Approximate shared-row mass — not separately stated for each rib arrangement | — | 45.1 kg | — |
| Classification | |||
| Official Category Path | — | — | Cylindrical roller bearings - Single-row - NUP |
| Official Classification 1 | — | — | Cylindrical roller bearings / Single-row / NUP |
| Construction | |||
| Single-row construction type | — | NUP | — |
| Rib arrangement | — | Two outer-ring ribs; one integral and one loose inner-ring rib | — |
| Standard cage material | — | Machined brass | — |
| Standard cage marking | — | M | — |
| Other cage codes listed for this catalogue row | — | None listed in this row | — |
| Precision — designation omission rule | — | ISO Normal when no precision suffix is specified | — |
| Clearance identification — verify interchangeability | — | No clearance suffix shown. CN omission applies to interchangeable designs; do not infer a numerical clearance. | — |
| Optimized crowning note | — | Catalogue asterisk: optimized crowning may be available; not verified as fitted | — |
| Dimensions | |||
| Minimum chamfer dimensionrmin | 4 mm | — | — |
| Minimum chamfer dimensionrmin | 0.157 in | — | — |
| Minimum chamfer dimensionr1 min | 4 mm | — | — |
| Minimum chamfer dimensionr1 min | 0.157 in | — | — |
| Raceway diameter outer ringE | 283 mm | — | — |
| Raceway diameter outer ringE | 11.142 in | — | — |
| Raceway diameter inner ringF | 193 mm | — | — |
| Raceway diameter inner ringF | 7.598 in | — | — |
| Width of loose ribB3 | 16.5 mm | — | — |
| Width of loose ribB3 | 0.65 in | — | — |
| Load ratings — standard cage | |||
| Basic dynamic radial load ratingCr | — | 1430000 N | — |
| Basic static radial load ratingC0r | — | 1600000 N | — |
| Lubrication-qualified speed — standard cage | |||
| Thermal speed rating — oil bath | — | 2000 r/min | — |
| Mechanical limiting speed — forced oil circulation | — | 2400 r/min | — |
| Limiting speed — grease | — | 1600 r/min | — |
| Limiting speed — oil bath | — | 2000 r/min | — |
| Main Dimensions & Performance Data | |||
| Basic dynamic load rating, radialCr | 1,380,000 N | — | — |
| Basic dynamic load rating, radialCr | 310,251.799 lbf | — | — |
| Basic static load rating, radialC0r | 1,600,000 N | — | — |
| Basic static load rating, radialC0r | 359,712.23 lbf | — | — |
| Fatigue load limit, radialCur | 249,000 N | — | — |
| Fatigue load limit, radialCur | 55,980.216 lbf | — | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | 373554 | — | — |
| Official Class Key | — | — | 040-010-000 |
| Base Type | NUP2330 | — | — |
| Old Designation | ["NUP2330E.M1","NUP2330-E-M1"] | — | — |
| Gpsd Group | F01 | — | — |
| Product Line Id | 63 | — | — |
| X Life Marking | XL | — | — |
| SAP material number | 0192543770000 | — | — |
| Base product | 2305090122 | — | — |
| Bearing X designation | NUP2330-E-XL-M1 | — | — |
| Mounting Manager ID | NUP2330-E-XL-M1 | — | — |
| Grease application ID | NUP2330-E-XL-M1 | — | — |
| Mounting dimensions | |||
| Maximum rib diameter inner ringd1 | 209.5 mm | — | — |
| Maximum rib diameter inner ringd1 | 8.248 in | — | — |
| Minimum rib diameter outer ringD1 min | 269.8 mm | — | — |
| Minimum rib diameter outer ringD1 min | 10.622 in | — | — |
| Minimum diameter shaft shoulderda min | 167 mm | — | — |
| Minimum diameter shaft shoulderda min | 6.575 in | — | — |
| Minimum shaft shoulderdc min | 213 mm | — | — |
| Minimum shaft shoulderdc min | 8.386 in | — | — |
| Maximum diameter of housing shoulderDa max | 303 mm | — | — |
| Maximum diameter of housing shoulderDa max | 11.929 in | — | — |
| Maximum recess radiusra max | 3 mm | — | — |
| Maximum recess radiusra max | 0.118 in | — | — |
| Mounting dimensions — shown arrangement | |||
| Minimum shaft shoulder diameterdb min. | — | 166 mm | — |
| Maximum housing shoulder diameterDa max. | — | 304 mm | — |
| Maximum adjacent fillet radiusra max. | — | 3 mm | — |
| Maximum secondary adjacent fillet radiusrb max. | — | 3 mm | — |
| Product characteristics | |||
| DesignE | Increased Capacity Design | — | — |
| Radial internal clearanceCN (Group N) | Normal internal clearance | — | — |
| Tolerance classPN | Normal (ISO 492:2023) | — | — |
| Number of rows1 | Single-row design | — | — |
| Product Identity | |||
| Construction | Cylindrical roller bearing NUP..-E-XL-M1, with cage, single row, locating bearing, 2 ribs on outer ring, 1 rib on inner ring, rib washer internal, type NUP | — | — |
| Short Description | Cylindrical roller bearing | — | — |
| Technical Data | |||
| d | — | — | 320 mm |
| B | — | — | 108 mm |
| R(Min.) | — | — | 4 mm |
| R1(Min.) | — | — | 4 mm |
| Bore Diameter (D) | 150 mm | — | — |
| Fw | — | — | 193 mm |
| Outside Diamater (D) | 320 mm | — | — |
| Ew | — | — | - mm |
| Total Width (B) | 108 mm | — | — |
| Basic Load Ratings : Cr | — | — | 1270 kN |
| Basic Dynamic Load Rating, Radial (Cr) | 1,380,000 N | — | — |
| Basic Load Ratings : C0R | — | — | 1400 kN |
| Basic Static Load Rating, Radial (C0R) | 1,600,000 N | — | — |
| Fatigue Load Limit : Cu | — | — | 167 kN |
| Raceway Diameter Inner Ring (F) | 193 mm | — | — |
| Limiting Speeds(Grease Lub.) | — | — | 1600 min-1 |
| Operating Temperature Min. (Tmin) | -30 °C | — | — |
| Limiting Speeds(Oil Lub.) | — | — | 2300 min-1 |
| Minimum Diameter Shaft Shoulder (Da) | 167 mm | — | — |
| Sd1 | — | — | - mm |
| Width Of Loose Rib (B3) | 16.5 mm | — | — |
| B1 | — | — | - mm |
| Operating Temperature Max. (Tmax) | 150 °C | — | — |
| B2 | — | — | - mm |
| Limiting Speed (Limiting Spe) | 3,650 1/min | — | — |
| Da(Min.) | — | — | 166 mm |
| Minimum Shaft Shoulder (Dc Min) | 213 mm | — | — |
| Db(Min.) | — | — | - mm |
| Reference Speed (Nϑr) | 1,460 1/min | — | — |
| Db(Max.) | — | — | - mm |
| Maximum Recess Radius (Ra Max) | 3 mm | — | — |
| Dc(Min.) | — | — | - mm |
| Maximum Diameter Of Housing Shoulder (Da) | 303 mm | — | — |
| Dd(Min.) | — | — | - mm |
| Maximum Rib Diameter Inner Ring (D1) | 209.5 mm | — | — |
| Da(Max.) | — | — | 304 mm |
| Minimum Chamfer Dimension (R1 Min) | 4 mm | — | — |
| Minimum Rib Diameter Outer Ring (D1 Min) | 269.8 mm | — | — |
| Minimum Chamfer Dimension (Rmin) | 4 mm | — | — |
| Ra(Max.) | — | — | 3 mm |
| Raceway Diameter Outer Ring (E) | 283 mm | — | — |
| Rb(Max.) | — | — | 3 mm |
| Fatigue Load Limit, Radial (Cur) | 249,000 N | — | — |
| Mass(Refer.) | — | — | 46.1 kg |
| Temperature range | |||
| Operating temperature min.Tmin | -30 °C | — | — |
| Operating temperature min.Tmin | -22 °F | — | — |
| Operating temperature max.Tmax | 150 °C | — | — |
| Operating temperature max.Tmax | 302 °F | — | — |
Independent reference comparison based on the manufacturer data currently loaded. Always verify current limits, tolerances and suffix definitions with the official source before engineering selection.