Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“NJ419” across 3 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAGNJ419-XL-M195 × 240 × 55 mm | TIMKENNJ419MAC395 × 240 × 55 mm | KOYONJ41995 × 240 × 55 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | FAG | TIMKEN | KOYO |
| Designation | NJ419-XL-M1 | NJ419MAC3 | NJ419 |
| Product family | — | Cylindrical 1-Row | Single-row / NJ |
| Detailed type | Cylindrical roller bearings | Cylindrical roller bearings | Cylindrical roller bearings |
| Series | NJ419 | EX27839 | — |
| Bore diameterd | 95 mm | 95 mm | 95 mm |
| Outside diameterD | 240 mm | 240 mm | 240 mm |
| WidthB | 55 mm | 55 mm | 55 mm |
| Basic dynamic load ratingC | 495 kN | 490 kN | 502 kN |
| Basic static load ratingC0 | 470 kN | 500 kN | 444 kN |
| Fatigue load limitPu | 81 kN | — | 60.1 kN |
| Reference speednref | 3200 r/min | — | — |
| Limiting speednG | 5200 r/min | — | 2600 r/min |
| Mass≈m | 13.9 kg | 14 kg | 13.7 kg |
| Precision class | PN — Normal (ISO 492:2023) | — | — |
| Internal clearance | CN (Group N) — Normal internal clearance | — | — |
| Sealing | — | Open | — |
| Cage | M1 — Two Piece Brass Cage Roller Guided | Window Brass cage | — |
| Minimum operating temperatureTmin | -30 °C | — | — |
| Maximum operating temperatureTmax | 150 °C | — | — |
| Additional information | |||
| L-washer | HJ419 | — | — |
| Calculation Factors | |||
| K Factor | — | 0.00 | — |
| Y1 Factor | — | 0.00 | — |
| Y2 Factor | — | 0.00 | — |
| Y0 Factor | — | 0.00 | — |
| E Factor | — | 0.00 | — |
| Cg Factor | — | 0.1070 | — |
| Capabilities & suitability | |||
| Radial load capacity | Yes | — | — |
| Axial load capacity in one direction | Yes | — | — |
| Suitable for grease lubrication | Yes | — | — |
| Suitable for oil lubrication | Yes | — | — |
| Unsealed design | Yes | — | — |
| Classification | |||
| Official Category Path | — | — | Cylindrical roller bearings - Single-row - NJ |
| Official Classification 1 | — | — | Cylindrical roller bearings / Single-row / NJ |
| Dimensions | |||
| Minimum chamfer dimensionrmin | 4 mm | — | — |
| Minimum chamfer dimensionrmin | 0.157 in | — | — |
| Minimum chamfer dimensionr1 min | 4 mm | — | — |
| Minimum chamfer dimensionr1 min | 0.157 in | — | — |
| Axial displacements | 5.2 mm | — | — |
| Axial displacements | 0.205 in | — | — |
| Raceway diameter outer ringE | 201.5 mm | — | — |
| Raceway diameter outer ringE | 7.933 in | — | — |
| Raceway diameter inner ringF | 133.5 mm | — | — |
| Raceway diameter inner ringF | 5.256 in | — | — |
| Minimum rib diameter outer ringD1 min | 189.7 mm | — | — |
| Minimum rib diameter outer ringD1 min | 7.469 in | — | — |
| Maximum rib diameter inner ringd1 | 146.8 mm | — | — |
| Maximum rib diameter inner ringd1 | 5.78 in | — | — |
| Main Dimensions & Performance Data | |||
| Basic dynamic load rating, radialCr | 495,000 N | — | — |
| Basic dynamic load rating, radialCr | 111,285.971 lbf | — | — |
| Basic static load rating, radialC0r | 470,000 N | — | — |
| Basic static load rating, radialC0r | 105,665.468 lbf | — | — |
| Fatigue load limit, radialCur | 81,000 N | — | — |
| Fatigue load limit, radialCur | 18,210.432 lbf | — | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | 373097 | — | — |
| Material Number | — | 000000000190033140 | — |
| Official Class Key | — | — | 040-010-000 |
| Base Type | NJ419 | — | — |
| World Assembly Part Number | — | NJ419MA | — |
| Gpsd Group | F01 | — | — |
| Inner Ring Part Number | — | 95ARJA04 | — |
| Product Line Id | 63 | — | — |
| Outer Ring Part Number | — | 95ERUA04 | — |
| Drawing Number | — | M941152 | — |
| Official Source System | — | CORE BP - DS DF | — |
| Official Last Run | — | 2026-08-23T20:02:46.733 | — |
| SAP material number | 0192302220000 | — | — |
| Base product | 2305090111 | — | — |
| Bearing X designation | NJ419-XL-M1 | — | — |
| Mounting Manager ID | NJ419-XL-M1 | — | — |
| Grease application ID | NJ419-XL-M1 | — | — |
| Mounting dimensions | |||
| Minimum diameter shaft shoulderda min | 115 mm | — | — |
| Minimum diameter shaft shoulderda min | 4.528 in | — | — |
| Maximum diameter of shaft shoulderda max | 132 mm | — | — |
| Maximum diameter of shaft shoulderda max | 5.197 in | — | — |
| Maximum diameter of housing shoulderDa max | 220 mm | — | — |
| Maximum diameter of housing shoulderDa max | 8.661 in | — | — |
| Minimum shaft shoulderdc min | 149 mm | — | — |
| Minimum shaft shoulderdc min | 5.866 in | — | — |
| Maximum recess radiusra max | 3 mm | — | — |
| Maximum recess radiusra max | 0.118 in | — | — |
| Product characteristics | |||
| Design | Standard | — | — |
| Radial internal clearanceCN (Group N) | Normal internal clearance | — | — |
| Tolerance classPN | Normal (ISO 492:2023) | — | — |
| Number of rows1 | Single-row design | — | — |
| Product Identity | |||
| Construction | Cylindrical roller bearing NJ..-M1, with cage, single row, semi-locating bearing, 2 ribs on outer ring, 1 rib on inner ring, type NJ | Single Row Cylindrical Roller Bearing | Imperial Series | 3.7402 in Bore | 9.4488 in OD | 2.1654 in Width | Open | Cylindrical Bore | Machined Window Brass Cage | C3 Clearance | — |
| Short Description | Cylindrical roller bearing | — | — |
| Type Description | — | Cylindrical 1-Row | — |
| Number Of Rows | — | 1 | — |
| Tapered Bore | — | N | — |
| Technical Data | |||
| d | — | — | 240 mm |
| B | — | — | 55 mm |
| Bore Diameter (D) | 95 mm | — | — |
| R(Min.) | — | — | 4 mm |
| Outside Diamater (D) | 240 mm | — | — |
| Overall Width | — | 0.000 mm | — |
| R1(Min.) | — | — | 4 mm |
| Total Width (B) | 55 mm | — | — |
| Radial Rating | — | 490,000 N | — |
| Fw | — | — | 133.5 mm |
| Basic Dynamic Load Rating, Radial (Cr) | 495,000 N | — | — |
| Axial Rating | — | 0 N | — |
| Ew | — | — | - mm |
| Basic Static Load Rating, Radial (C0R) | 470,000 N | — | — |
| Dynamic Rating C1 | — | 490,000 N | — |
| Basic Load Ratings : Cr | — | — | 502 kN |
| Raceway Diameter Inner Ring (F) | 133.5 mm | — | — |
| Dynamic Rating C90 | — | 0 N | — |
| Basic Load Ratings : C0R | — | — | 444 kN |
| Operating Temperature Min. (Tmin) | -30 °C | — | — |
| Dynamic Axial Rating Ca90 | — | 0 N | — |
| Fatigue Load Limit : Cu | — | — | 60.1 kN |
| Minimum Diameter Shaft Shoulder (Da) | 115 mm | — | — |
| Dynamic Axial Rating Ca1 | — | 0 N | — |
| Limiting Speeds(Grease Lub.) | — | — | 2600 min-1 |
| Operating Temperature Max. (Tmax) | 150 °C | — | — |
| Static Radial Rating C0 | — | 500,000 N | — |
| Limiting Speeds(Oil Lub.) | — | — | 3400 min-1 |
| Limiting Speed (Limiting Spe) | 5,200 1/min | — | — |
| Extended Dynamic Rating Ce | — | 0 N | — |
| Sd1 | — | — | - mm |
| Minimum Shaft Shoulder (Dc Min) | 149 mm | — | — |
| Static Axial Rating C0A | — | 0 N | — |
| B1 | — | — | - mm |
| Reference Speed (Nϑr) | 3,200 1/min | — | — |
| B2 | — | — | - mm |
| Maximum Recess Radius (Ra Max) | 3 mm | — | — |
| Da(Min.) | — | — | - mm |
| Maximum Diameter Of Housing Shoulder (Da) | 220 mm | — | — |
| Db(Min.) | — | — | - mm |
| Maximum Rib Diameter Inner Ring (D1) | 146.8 mm | — | — |
| Db(Max.) | — | — | - mm |
| Minimum Chamfer Dimension (R1 Min) | 4 mm | — | — |
| Dc(Min.) | — | — | - mm |
| Axial Displacement (S) | 5.2 mm | — | — |
| Dd(Min.) | — | — | - mm |
| Minimum Rib Diameter Outer Ring (D1 Min) | 189.7 mm | — | — |
| Da(Max.) | — | — | 224 mm |
| Maximum Diameter Of Shaft Shoulder (Da Max) | 132 mm | — | — |
| Minimum Chamfer Dimension (Rmin) | 4 mm | — | — |
| Raceway Diameter Outer Ring (E) | 201.5 mm | — | — |
| Ra(Max.) | — | — | 3 mm |
| Fatigue Load Limit, Radial (Cur) | 81,000 N | — | — |
| Rb(Max.) | — | — | 3 mm |
| Mass(Refer.) | — | — | 13.7 kg |
| Temperature range | |||
| Operating temperature min.Tmin | -30 °C | — | — |
| Operating temperature min.Tmin | -22 °F | — | — |
| Operating temperature max.Tmax | 150 °C | — | — |
| Operating temperature max.Tmax | 302 °F | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.