Choose the exact products yourself
CUSTOM / 08 MAX
Custom Comparison
Search a designation, choose up to eight exact suffix variants, and build your own side-by-side technical table.
Build your own set
Choose exact variants
For an automatic one-result-per-brand view, use Same-model Comparison. This page is for deliberate manual selection.
Auto-compare NJ419 by brand →Model matches
Select products
The first result per loaded brand is preselected. Choose up to eight exact variants and update the table.
Technical comparison
3 products side by side
A dash means that the loaded manufacturer source did not provide that field. It does not mean the feature is absent.
| Parameter | FAGNJ419-XL-M195 × 240 × 55 mm | TIMKENNJ419MAC395 × 240 × 55 mm | KOYONJ41995 × 240 × 55 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | FAG | TIMKEN | KOYO |
| Designation | NJ419-XL-M1 | NJ419MAC3 | NJ419 |
| Product family | — | Cylindrical 1-Row | Single-row / NJ |
| Detailed type | Cylindrical roller bearings | Cylindrical roller bearings | Cylindrical roller bearings |
| Series | NJ419 | EX27839 | — |
| Bore diameterd | 95 mm | 95 mm | 95 mm |
| Outside diameterD | 240 mm | 240 mm | 240 mm |
| WidthB | 55 mm | 55 mm | 55 mm |
| Basic dynamic load ratingC | 495 kN | 490 kN | 502 kN |
| Basic static load ratingC0 | 470 kN | 500 kN | 444 kN |
| Fatigue load limitPu | 81 kN | — | 60.1 kN |
| Reference speednref | 3200 r/min | — | — |
| Limiting speednG | 5200 r/min | — | 2600 r/min |
| Mass≈m | 13.9 kg | 14 kg | 13.7 kg |
| Precision class | PN — Normal (ISO 492:2023) | — | — |
| Internal clearance | CN (Group N) — Normal internal clearance | — | — |
| Sealing | — | Open | — |
| Cage | M1 — Two Piece Brass Cage Roller Guided | Window Brass cage | — |
| Minimum operating temperatureTmin | -30 °C | — | — |
| Maximum operating temperatureTmax | 150 °C | — | — |
| Additional information | |||
| L-washer | HJ419 | — | — |
| Calculation Factors | |||
| K Factor | — | 0.00 | — |
| Y1 Factor | — | 0.00 | — |
| Y2 Factor | — | 0.00 | — |
| Y0 Factor | — | 0.00 | — |
| E Factor | — | 0.00 | — |
| Cg Factor | — | 0.1070 | — |
| Capabilities & suitability | |||
| Radial load capacity | Yes | — | — |
| Axial load capacity in one direction | Yes | — | — |
| Suitable for grease lubrication | Yes | — | — |
| Suitable for oil lubrication | Yes | — | — |
| Unsealed design | Yes | — | — |
| Classification | |||
| Official Category Path | — | — | Cylindrical roller bearings - Single-row - NJ |
| Official Classification 1 | — | — | Cylindrical roller bearings / Single-row / NJ |
| Dimensions | |||
| Minimum chamfer dimensionrmin | 4 mm | — | — |
| Minimum chamfer dimensionrmin | 0.157 in | — | — |
| Minimum chamfer dimensionr1 min | 4 mm | — | — |
| Minimum chamfer dimensionr1 min | 0.157 in | — | — |
| Axial displacements | 5.2 mm | — | — |
| Axial displacements | 0.205 in | — | — |
| Raceway diameter outer ringE | 201.5 mm | — | — |
| Raceway diameter outer ringE | 7.933 in | — | — |
| Raceway diameter inner ringF | 133.5 mm | — | — |
| Raceway diameter inner ringF | 5.256 in | — | — |
| Minimum rib diameter outer ringD1 min | 189.7 mm | — | — |
| Minimum rib diameter outer ringD1 min | 7.469 in | — | — |
| Maximum rib diameter inner ringd1 | 146.8 mm | — | — |
| Maximum rib diameter inner ringd1 | 5.78 in | — | — |
| Main Dimensions & Performance Data | |||
| Basic dynamic load rating, radialCr | 495,000 N | — | — |
| Basic dynamic load rating, radialCr | 111,285.971 lbf | — | — |
| Basic static load rating, radialC0r | 470,000 N | — | — |
| Basic static load rating, radialC0r | 105,665.468 lbf | — | — |
| Fatigue load limit, radialCur | 81,000 N | — | — |
| Fatigue load limit, radialCur | 18,210.432 lbf | — | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | 373097 | — | — |
| Material Number | — | 000000000190033140 | — |
| Official Class Key | — | — | 040-010-000 |
| Base Type | NJ419 | — | — |
| World Assembly Part Number | — | NJ419MA | — |
| Gpsd Group | F01 | — | — |
| Inner Ring Part Number | — | 95ARJA04 | — |
| Product Line Id | 63 | — | — |
| Outer Ring Part Number | — | 95ERUA04 | — |
| Drawing Number | — | M941152 | — |
| Official Source System | — | CORE BP - DS DF | — |
| Official Last Run | — | 2026-08-23T20:02:46.733 | — |
| SAP material number | 0192302220000 | — | — |
| Base product | 2305090111 | — | — |
| Bearing X designation | NJ419-XL-M1 | — | — |
| Mounting Manager ID | NJ419-XL-M1 | — | — |
| Grease application ID | NJ419-XL-M1 | — | — |
| Mounting dimensions | |||
| Minimum diameter shaft shoulderda min | 115 mm | — | — |
| Minimum diameter shaft shoulderda min | 4.528 in | — | — |
| Maximum diameter of shaft shoulderda max | 132 mm | — | — |
| Maximum diameter of shaft shoulderda max | 5.197 in | — | — |
| Maximum diameter of housing shoulderDa max | 220 mm | — | — |
| Maximum diameter of housing shoulderDa max | 8.661 in | — | — |
| Minimum shaft shoulderdc min | 149 mm | — | — |
| Minimum shaft shoulderdc min | 5.866 in | — | — |
| Maximum recess radiusra max | 3 mm | — | — |
| Maximum recess radiusra max | 0.118 in | — | — |
| Product characteristics | |||
| Design | Standard | — | — |
| Radial internal clearanceCN (Group N) | Normal internal clearance | — | — |
| Tolerance classPN | Normal (ISO 492:2023) | — | — |
| Number of rows1 | Single-row design | — | — |
| Product Identity | |||
| Construction | Cylindrical roller bearing NJ..-M1, with cage, single row, semi-locating bearing, 2 ribs on outer ring, 1 rib on inner ring, type NJ | Single Row Cylindrical Roller Bearing | Imperial Series | 3.7402 in Bore | 9.4488 in OD | 2.1654 in Width | Open | Cylindrical Bore | Machined Window Brass Cage | C3 Clearance | — |
| Short Description | Cylindrical roller bearing | — | — |
| Type Description | — | Cylindrical 1-Row | — |
| Number Of Rows | — | 1 | — |
| Tapered Bore | — | N | — |
| Technical Data | |||
| d | — | — | 240 mm |
| B | — | — | 55 mm |
| Bore Diameter (D) | 95 mm | — | — |
| R(Min.) | — | — | 4 mm |
| Outside Diamater (D) | 240 mm | — | — |
| Overall Width | — | 0.000 mm | — |
| R1(Min.) | — | — | 4 mm |
| Total Width (B) | 55 mm | — | — |
| Radial Rating | — | 490,000 N | — |
| Fw | — | — | 133.5 mm |
| Basic Dynamic Load Rating, Radial (Cr) | 495,000 N | — | — |
| Axial Rating | — | 0 N | — |
| Ew | — | — | - mm |
| Basic Static Load Rating, Radial (C0R) | 470,000 N | — | — |
| Dynamic Rating C1 | — | 490,000 N | — |
| Basic Load Ratings : Cr | — | — | 502 kN |
| Raceway Diameter Inner Ring (F) | 133.5 mm | — | — |
| Dynamic Rating C90 | — | 0 N | — |
| Basic Load Ratings : C0R | — | — | 444 kN |
| Operating Temperature Min. (Tmin) | -30 °C | — | — |
| Dynamic Axial Rating Ca90 | — | 0 N | — |
| Fatigue Load Limit : Cu | — | — | 60.1 kN |
| Minimum Diameter Shaft Shoulder (Da) | 115 mm | — | — |
| Dynamic Axial Rating Ca1 | — | 0 N | — |
| Limiting Speeds(Grease Lub.) | — | — | 2600 min-1 |
| Operating Temperature Max. (Tmax) | 150 °C | — | — |
| Static Radial Rating C0 | — | 500,000 N | — |
| Limiting Speeds(Oil Lub.) | — | — | 3400 min-1 |
| Limiting Speed (Limiting Spe) | 5,200 1/min | — | — |
| Extended Dynamic Rating Ce | — | 0 N | — |
| Sd1 | — | — | - mm |
| Minimum Shaft Shoulder (Dc Min) | 149 mm | — | — |
| Static Axial Rating C0A | — | 0 N | — |
| B1 | — | — | - mm |
| Reference Speed (Nϑr) | 3,200 1/min | — | — |
| B2 | — | — | - mm |
| Maximum Recess Radius (Ra Max) | 3 mm | — | — |
| Da(Min.) | — | — | - mm |
| Maximum Diameter Of Housing Shoulder (Da) | 220 mm | — | — |
| Db(Min.) | — | — | - mm |
| Maximum Rib Diameter Inner Ring (D1) | 146.8 mm | — | — |
| Db(Max.) | — | — | - mm |
| Minimum Chamfer Dimension (R1 Min) | 4 mm | — | — |
| Dc(Min.) | — | — | - mm |
| Axial Displacement (S) | 5.2 mm | — | — |
| Dd(Min.) | — | — | - mm |
| Minimum Rib Diameter Outer Ring (D1 Min) | 189.7 mm | — | — |
| Da(Max.) | — | — | 224 mm |
| Maximum Diameter Of Shaft Shoulder (Da Max) | 132 mm | — | — |
| Minimum Chamfer Dimension (Rmin) | 4 mm | — | — |
| Raceway Diameter Outer Ring (E) | 201.5 mm | — | — |
| Ra(Max.) | — | — | 3 mm |
| Fatigue Load Limit, Radial (Cur) | 81,000 N | — | — |
| Rb(Max.) | — | — | 3 mm |
| Mass(Refer.) | — | — | 13.7 kg |
| Temperature range | |||
| Operating temperature min.Tmin | -30 °C | — | — |
| Operating temperature min.Tmin | -22 °F | — | — |
| Operating temperature max.Tmax | 150 °C | — | — |
| Operating temperature max.Tmax | 302 °F | — | — |
Independent reference comparison based on the manufacturer data currently loaded. Always verify current limits, tolerances and suffix definitions with the official source before engineering selection.