Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“NJ1896” across 3 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKFNJ 1896 MA480 × 600 × 56 mm | FAGNJ1896-M1A480 × 600 × 56 mm | TIMKENNJ1896EMA480 × 600 × 56 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | TIMKEN |
| Designation | NJ 1896 MA | NJ1896-M1A | NJ1896EMA |
| Product family | Cylindrical roller bearings | — | Cylindrical 1-Row |
| Detailed type | Single row cylindrical roller bearing, nj design | Cylindrical roller bearings | Cylindrical roller bearings |
| Series | — | — | EX27932 |
| Bore diameterd | 480 mm | 480 mm | 480 mm |
| Outside diameterD | 600 mm | 600 mm | 600 mm |
| WidthB | 56 mm | 56 mm | 56 mm |
| Basic dynamic load ratingC | 737 kN | 680 kN | 894 kN |
| Basic static load ratingC0 | 1560 kN | 1470 kN | 1680 kN |
| Fatigue load limitPu | 122 kN | 136 kN | — |
| Reference speednref | 1000 r/min | — | — |
| Limiting speednG | 1300 r/min | 1940 r/min | — |
| Mass≈m | 39.2 kg | 36.2 kg | 36.4 kg |
| Internal clearance | CN | — | — |
| Sealing | Without | — | Open |
| Cage | Machined brass | — | Window Brass cage |
| Lubricant | None | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 150 °C | — |
| Calculation Factors | |||
| K Factor | — | — | 0.00 |
| Y1 Factor | — | — | 0.00 |
| Y2 Factor | — | — | 0.00 |
| Y0 Factor | — | — | 0.00 |
| E Factor | — | — | 0.00 |
| Cg Factor | — | — | 0.2140 |
| Engineering — Abutment dimensions | |||
| Diameter of spacer sleeved a | max. 507 mm | — | — |
| Diameter of shaft abutmentd b | min. 528 mm | — | — |
| Diameter of housing abutmentD a | max. 587 mm | — | — |
| Radius of filletr a | max. 2.5 mm | — | — |
| Engineering — Calculation data | |||
| Minimum load factork r | 0.05 | — | — |
| Limiting valuee | 0.2 | — | — |
| Calculation factorY | 0.6 | — | — |
| Engineering — Dimensions | |||
| Shoulder diameter of inner ringd 1 | ≈ 522 mm | — | — |
| Shoulder diameter of outer ringD 1 | ≈ 561 mm | — | — |
| Raceway diameter of inner ringF | 511 mm | — | — |
| Chamfer dimensionr 1,2 | min. 3 mm | — | — |
| Permissible axial displacements | max. 4 mm | — | — |
| Logistics | |||
| Product net weight | 39.2 kg | — | — |
| eClass code | 23-05-09-01 | — | — |
| UNSPSC code | 31171505 | — | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 372334 | — |
| Material Number | — | — | 000000000190023862 |
| Gpsd Group | — | F01 | — |
| World Assembly Part Number | — | — | NJ1896EMA |
| Product Line Id | — | 75 | — |
| Inner Ring Part Number | — | — | 480ARJE18 |
| Outer Ring Part Number | — | — | 480ERUE18 |
| Drawing Number | — | — | M946465 |
| Upc | — | — | 0013992416643 |
| Official Source System | — | — | CORE BP - DS DF |
| Official Last Run | — | — | 2026-08-23T20:02:47.4 |
| Product identity | |||
| Official product category | Cylindrical roller bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/cylindrical-roller-bearings/single-row-cylindrical-roller-bearings | — | — |
| Structure group ID | BC1_001_101 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | Yes | — | — |
| Product Identity | |||
| Construction | — | Cylindrical roller bearing NJ..-M1A, with cage, single row, semi-locating bearing, 2 ribs on outer ring, 1 rib on inner ring, type NJ | Single Row Cylindrical Roller Bearing | Imperial Series | 18.8976 in Bore | 23.6220 in OD | 2.2047 in Width | Open | Cylindrical Bore | Machined Window Brass Cage | C0 Clearance |
| Short Description | — | Cylindrical roller bearing | — |
| Type Description | — | — | Cylindrical 1-Row |
| Number Of Rows | 1 | — | 1 |
| Tapered Bore | — | — | N |
| Properties | |||
| Bearing part | Complete bearing | — | — |
| Axial displacement capability | In one direction | — | — |
| Locating feature, bearing outer ring | Without | — | — |
| Bore type | Cylindrical | — | — |
| Number of flanges, outer ring | 2 | — | — |
| Number of flanges, inner ring | 1 | — | — |
| Loose flange | None | — | — |
| Radial internal clearance | CN | — | — |
| Tolerance class | Normal | — | — |
| Coating | Without | — | — |
| Relubrication feature | Without | — | — |
| Candidate for remanufacturing | Yes | — | — |
| Indicative carbon footprint for new product | 145.0 kg CO 2 e | — | — |
| Indicative carbon footprint for remanufactured product | 48.2 kg CO 2 e | — | — |
| Technical Data | |||
| Bore Diameter (D) | — | 480 mm | — |
| Outside Diamater (D) | — | 600 mm | — |
| Total Width (B) | — | 56 mm | — |
| Basic Dynamic Load Rating, Radial (Cr) | — | 680,000 N | — |
| Overall Width | — | — | 0.000 mm |
| Basic Static Load Rating, Radial (C0R) | — | 1,470,000 N | — |
| Radial Rating | — | — | 894,000 N |
| Raceway Diameter Inner Ring (F) | — | 514 mm | — |
| Axial Rating | — | — | 0 N |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| Dynamic Rating C1 | — | — | 894,000 N |
| Minimum Diameter Shaft Shoulder (Da) | — | 492 mm | — |
| Dynamic Rating C90 | — | — | 0 N |
| Operating Temperature Max. (Tmax) | — | 150 °C | — |
| Dynamic Axial Rating Ca90 | — | — | 0 N |
| Limiting Speed (Limiting Spe) | — | 1,940 1/min | — |
| Dynamic Axial Rating Ca1 | — | — | 0 N |
| Maximum Recess Radius (Ra Max) | — | 2.5 mm | — |
| Static Radial Rating C0 | — | — | 1,680,000 N |
| Maximum Diameter Of Housing Shoulder (Da) | — | 588 mm | — |
| Extended Dynamic Rating Ce | — | — | 0 N |
| Maximum Rib Diameter Inner Ring (D1) | — | 523.5 mm | — |
| Static Axial Rating C0A | — | — | 0 N |
| Minimum Chamfer Dimension (R1 Min) | — | 3 mm | — |
| Axial Displacement (S) | — | 6.6 mm | — |
| Minimum Rib Diameter Outer Ring (D1 Min) | — | 560.5 mm | — |
| Maximum Diameter Of Shaft Shoulder (Da Max) | — | 510 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 3 mm | — |
| Raceway Diameter Outer Ring (E) | — | 570 mm | — |
| Fatigue Load Limit, Radial (Cur) | — | 136,000 N | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.