Choose the exact products yourself
CUSTOM / 08 MAX
Custom Comparison
Search a designation, choose up to eight exact suffix variants, and build your own side-by-side technical table.
Build your own set
Choose exact variants
For an automatic one-result-per-brand view, use Same-model Comparison. This page is for deliberate manual selection.
Auto-compare NJ1896 by brand →Model matches
Select products
The first result per loaded brand is preselected. Choose up to eight exact variants and update the table.
Technical comparison
3 products side by side
A dash means that the loaded manufacturer source did not provide that field. It does not mean the feature is absent.
| Parameter | SKFNJ 1896 MA480 × 600 × 56 mm | FAGNJ1896-M1A480 × 600 × 56 mm | TIMKENNJ1896EMA480 × 600 × 56 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | TIMKEN |
| Designation | NJ 1896 MA | NJ1896-M1A | NJ1896EMA |
| Product family | Cylindrical roller bearings | — | Cylindrical 1-Row |
| Detailed type | Single row cylindrical roller bearing, nj design | Cylindrical roller bearings | Cylindrical roller bearings |
| Series | — | — | EX27932 |
| Bore diameterd | 480 mm | 480 mm | 480 mm |
| Outside diameterD | 600 mm | 600 mm | 600 mm |
| WidthB | 56 mm | 56 mm | 56 mm |
| Basic dynamic load ratingC | 737 kN | 680 kN | 894 kN |
| Basic static load ratingC0 | 1560 kN | 1470 kN | 1680 kN |
| Fatigue load limitPu | 122 kN | 136 kN | — |
| Reference speednref | 1000 r/min | — | — |
| Limiting speednG | 1300 r/min | 1940 r/min | — |
| Mass≈m | 39.2 kg | 36.2 kg | 36.4 kg |
| Internal clearance | CN | — | — |
| Sealing | Without | — | Open |
| Cage | Machined brass | — | Window Brass cage |
| Lubricant | None | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 150 °C | — |
| Calculation Factors | |||
| K Factor | — | — | 0.00 |
| Y1 Factor | — | — | 0.00 |
| Y2 Factor | — | — | 0.00 |
| Y0 Factor | — | — | 0.00 |
| E Factor | — | — | 0.00 |
| Cg Factor | — | — | 0.2140 |
| Engineering — Abutment dimensions | |||
| Diameter of spacer sleeved a | max. 507 mm | — | — |
| Diameter of shaft abutmentd b | min. 528 mm | — | — |
| Diameter of housing abutmentD a | max. 587 mm | — | — |
| Radius of filletr a | max. 2.5 mm | — | — |
| Engineering — Calculation data | |||
| Minimum load factork r | 0.05 | — | — |
| Limiting valuee | 0.2 | — | — |
| Calculation factorY | 0.6 | — | — |
| Engineering — Dimensions | |||
| Shoulder diameter of inner ringd 1 | ≈ 522 mm | — | — |
| Shoulder diameter of outer ringD 1 | ≈ 561 mm | — | — |
| Raceway diameter of inner ringF | 511 mm | — | — |
| Chamfer dimensionr 1,2 | min. 3 mm | — | — |
| Permissible axial displacements | max. 4 mm | — | — |
| Logistics | |||
| Product net weight | 39.2 kg | — | — |
| eClass code | 23-05-09-01 | — | — |
| UNSPSC code | 31171505 | — | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 372334 | — |
| Material Number | — | — | 000000000190023862 |
| Gpsd Group | — | F01 | — |
| World Assembly Part Number | — | — | NJ1896EMA |
| Product Line Id | — | 75 | — |
| Inner Ring Part Number | — | — | 480ARJE18 |
| Outer Ring Part Number | — | — | 480ERUE18 |
| Drawing Number | — | — | M946465 |
| Upc | — | — | 0013992416643 |
| Official Source System | — | — | CORE BP - DS DF |
| Official Last Run | — | — | 2026-08-23T20:02:47.4 |
| Product identity | |||
| Official product category | Cylindrical roller bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/cylindrical-roller-bearings/single-row-cylindrical-roller-bearings | — | — |
| Structure group ID | BC1_001_101 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | Yes | — | — |
| Product Identity | |||
| Construction | — | Cylindrical roller bearing NJ..-M1A, with cage, single row, semi-locating bearing, 2 ribs on outer ring, 1 rib on inner ring, type NJ | Single Row Cylindrical Roller Bearing | Imperial Series | 18.8976 in Bore | 23.6220 in OD | 2.2047 in Width | Open | Cylindrical Bore | Machined Window Brass Cage | C0 Clearance |
| Short Description | — | Cylindrical roller bearing | — |
| Type Description | — | — | Cylindrical 1-Row |
| Number Of Rows | 1 | — | 1 |
| Tapered Bore | — | — | N |
| Properties | |||
| Bearing part | Complete bearing | — | — |
| Axial displacement capability | In one direction | — | — |
| Locating feature, bearing outer ring | Without | — | — |
| Bore type | Cylindrical | — | — |
| Number of flanges, outer ring | 2 | — | — |
| Number of flanges, inner ring | 1 | — | — |
| Loose flange | None | — | — |
| Radial internal clearance | CN | — | — |
| Tolerance class | Normal | — | — |
| Coating | Without | — | — |
| Relubrication feature | Without | — | — |
| Candidate for remanufacturing | Yes | — | — |
| Indicative carbon footprint for new product | 145.0 kg CO 2 e | — | — |
| Indicative carbon footprint for remanufactured product | 48.2 kg CO 2 e | — | — |
| Technical Data | |||
| Bore Diameter (D) | — | 480 mm | — |
| Outside Diamater (D) | — | 600 mm | — |
| Total Width (B) | — | 56 mm | — |
| Basic Dynamic Load Rating, Radial (Cr) | — | 680,000 N | — |
| Overall Width | — | — | 0.000 mm |
| Basic Static Load Rating, Radial (C0R) | — | 1,470,000 N | — |
| Radial Rating | — | — | 894,000 N |
| Raceway Diameter Inner Ring (F) | — | 514 mm | — |
| Axial Rating | — | — | 0 N |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| Dynamic Rating C1 | — | — | 894,000 N |
| Minimum Diameter Shaft Shoulder (Da) | — | 492 mm | — |
| Dynamic Rating C90 | — | — | 0 N |
| Operating Temperature Max. (Tmax) | — | 150 °C | — |
| Dynamic Axial Rating Ca90 | — | — | 0 N |
| Limiting Speed (Limiting Spe) | — | 1,940 1/min | — |
| Dynamic Axial Rating Ca1 | — | — | 0 N |
| Maximum Recess Radius (Ra Max) | — | 2.5 mm | — |
| Static Radial Rating C0 | — | — | 1,680,000 N |
| Maximum Diameter Of Housing Shoulder (Da) | — | 588 mm | — |
| Extended Dynamic Rating Ce | — | — | 0 N |
| Maximum Rib Diameter Inner Ring (D1) | — | 523.5 mm | — |
| Static Axial Rating C0A | — | — | 0 N |
| Minimum Chamfer Dimension (R1 Min) | — | 3 mm | — |
| Axial Displacement (S) | — | 6.6 mm | — |
| Minimum Rib Diameter Outer Ring (D1 Min) | — | 560.5 mm | — |
| Maximum Diameter Of Shaft Shoulder (Da Max) | — | 510 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 3 mm | — |
| Raceway Diameter Outer Ring (E) | — | 570 mm | — |
| Fatigue Load Limit, Radial (Cur) | — | 136,000 N | — |
Independent reference comparison based on the manufacturer data currently loaded. Always verify current limits, tolerances and suffix definitions with the official source before engineering selection.